suptek ML3 Artistic Easel 37 to 65 inch LED LCD Screen User Manual
- June 2, 2024
- Suptek
Table of Contents
suptek ML3 Artistic Easel 37 to 65 inch LED LCD Screen
Warning!
Severe personal injury and property damage can result from improper
installation or assembly. Read the following warning carefully before
beginning.
- lf you do not understand the instructions or have any concerns or questions, please contact a qualified local installer.
- Do not install or assemble if the product or hardware is damaged or missing. If you require replacement parts, please contact your local distributor for assistance.
- This product fits most 37″-65″ LCD/plasma screen, load capacity up to 88 lbs/40kg;
- Do not use this product for anything other than the original purpose.
- This product contains moving parts, please use with caution.
PARTS
Screws for TV
Screws of accessory
STEP 1
Connect base, supporting legs and column
STEP 2
Connect locking bracket and plate
STEP 3
Connect column and plate
Make sure the plate in the middle of two supporting legs. Tighten all screws
in the locking brackets using wrench A4.
Insert wire clips to the supporting leg behind the plate.
STEP 4
TV and hooks installation
Preparation:
Check VESA patterns on the back of TV 
Optional : If your TV is located nearby the wall, then a steel wire A3 can be attached for added security.
STEP5
Connect TV and stand 
Tighten the pre-positioned screw on the hook.
STEP6
Security measurement of stand
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>