Suptek ML1760 TV Pedestal Support Instructions

June 14, 2024
Suptek

Suptek ML1760 TV Pedestal Support

Suptek-ML1760-TV-Pedestal-Support-PRODUCT

UNPACKING INSTRUCTIONS

  • Carefully open the carton, remove contents and lay it out on cardboard or other protective surface to avoid damage.
  • Check package contents against the Supplied Parts List on the next page to ensure that all components are well received and undamaged. Do not use damaged or defective parts.
  • Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

  • Install and operate this device with care. Please read this instruction before installation, and carefully follow all instructions contained herein. Use proper safety equipment during installation.
  • Please call a qualified installation contractor for help if you don’t understand these directions or have any doubts about the safety of the installation.
  • Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Suptek-ML1760-TV-Pedestal-Support-FIG-1 \(1\)

  • Base Plate-A1
  • Junction Plate-A2
  • Plastic Cover-A3
  • TV Bracket 1-A4
  • TV Bracket 2-A5
  • Base Plate-B1
  • Junction Plate-B2Suptek-ML1760-TV-Pedestal-Support-FIG-1 \(2\)
  • Plastic Cover-B3
  • TV Bracket 1-B4
  • TV Bracket 2-B5
  • M6x10-C
  • M6 Nut-D
  • M6 Nut2-E
  • Allen Key-F
  • Wrench-GSuptek-ML1760-TV-Pedestal-Support-FIG-1 \(3\)
  • M4 Washer-N
  • M6 Washer-O
  • M8 Washer-P
  • M4 Spacer-Q
  • M6/M8 Spacer-R

INSTALLATION INSTRUCTION

  1. Connecting the Base Plates and Junction PlatesSuptek-ML1760-TV-Pedestal-Support-FIG-1 \(4\)
  2. Connecting the Vertical Monitor BracketsSuptek-ML1760-TV-Pedestal-Support-FIG-1 \(5\)
  3. Connecting the TV Brackets and Junction Plates, then install the Plastic CoversSuptek-ML1760-TV-Pedestal-Support-FIG-1 \(6\)
  4. Attaching the TV Brackets to the back of TVSuptek-ML1760-TV-Pedestal-Support-FIG-1 \(7\)

First of all, make sure the diameter and length of the Bolts (H, I, J, K, L, M) your TV requires. Once you have determined the correct diameter and length, you will thread the Bolts into the TV using the correct Washers(N,O,P). Use the Spacers(Q, R) only if the bolts are too long.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals