suptek PR05 Projector Ceiling Mount Bracket Instruction Manual
- June 14, 2024
- Suptek
Table of Contents
- PR05 Projector Ceiling Mount Bracket
- Tools RT ecommended
- Boxed Parts
- Measure the Projector fixing holes
- Prepare the Projector Mounting Bracket.
- Fitting the Projector Mounting Bracket
- Attach Ceiling Bracket to Extendable Pole
- Different Locations
- Fitting the Ceiling Bracket
- Attach the Projector
- Cable Management
- Optional
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PR05 Projector Ceiling Mount Bracket
PR05
Read through ALL instructions before commencing assembly. If you have any questions about this product or issues with assembly contact the customer services help line before returning this product to the store.
Retain all packaging in case the bracket needs to be returned.
Contents may vary from photography/ Illustrations.
You will not need all these parts, so expect there to be some left over
depending upon the specification of your projector.
This product is intended for indoor use only. Use of this product outdoors
could lead to failure and personal injury.
It is the responsibility of the installer to ensure that the mounting surface
is of a suitable standard and void of any services (eg gas, electricity, water
etc).
SUPTEK accept no responsibility for any damage or loss caused by installing
this product on a sub standard surface.
Tools RT ecommended
Boxed Parts
Projector Screws
Measure the Projector fixing holes
Fixing holes must be within the shaded area **** If your Projector fixing holes are not within the shaded area STOP installation now and contact the customer help lineYou are provided with 4 diameters of Projector fixing screws,M3,M4,M5 and M6 . Determine the screw diameter that fits and remember for step 3.
Prepare the Projector Mounting Bracket.
Configurations are not limited to the examples shown below . Use the parts supplied in any configuration to suit your projector.The example shown below is the medium hole configuration.
Fitting the Projector Mounting Bracket
WARNING Attach the bracket to your Projector using suitable screw
reducer and spacer combinations
**** After completing step 3 you will have fittings left over please keep for
future reference
Attach Ceiling Bracket to Extendable Pole
If you have chosen not to use the extendable pole A 1 , please ignore stages 4 and 5. You will then fit the ceiling bracket as per stage 6.
Different Locations
Please see below for examples of dif ferent Projector mounting locations
Fitting the Ceiling Bracket
Please note, the fitting process is exactly the same if you fit to ceiling, wall or sloping ceiling.
Attach the Projector
Cable Management
**** Ensure cables don’t restrict movement
Optional
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>