Suptek MC5602 Ceiling TV Wall Mount Stand User Manual
- June 14, 2024
- Suptek
Table of Contents
- Suptek MC5602 Ceiling TV Wall Mount Stand
- Product Information
- Product Usage Instructions
- Frequently Asked Questions
- [For further assistance or inquiries, please contact us at after-
- Product Components
- Screw Package 1
- Screw Package 2
- Installation Steps
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Suptek MC5602 Ceiling TV Wall Mount Stand
Product Information
Product Components:
- Outer Pole*1
- Screw Package 1
- Pedestal*1
- Junction Plate*1
- Inner Pole Connector*1
- Faceplate*1
- Hang hook*2
- A-M612 Semicircle Hexagon2
- B-M6 Nut*2
- C-M4 Allen Key*1
- D-M850 Outer Hexagonal Screw2
- E-M8204 Spacer*4
- Screw Package 2
- F-M8 Nut*3
- G-8 Washer*5
- H-M845 Screw1
- I-M8 Locking Nut*2
- A-Plastic Anchors*4
- B-Drilling Screw*4
- C- 8 Spacer*4
- D-M825 Screw4
- E-M625 Screw4
- F-M525 Screw4
- G-M425 Screw4
- H-5Washer*4
- I-6Washer*4
Specifications
- Material: High-quality steel and plastic
- Weight: 2.5 kg (5.5 lbs)
- Maximum Load Capacity: 10 kg (22 lbs)
- Adjustability: Faceplate can be adjusted up and down
- Compatibility: Suitable for walls with plastic anchors or self-drilling screws
Product Usage Instructions
Installation Steps
Step 1: Connection of Pedestal and Junction Plate
Required Components:
- Pedestal
- Junction Plate
- A-M6*12 Semicircle Hexagon
- B-M6 Nut
- C-M4 Allen Key
Instructions:
- Attach the Pedestal to the Junction Plate using the A-M6*12 Semicircle Hexagon screws.
- Tighten the screws using the C-M4 Allen Key and B-M6 Nuts.
Step 2: Wall Piece Installation
Required Components:
- Pedestal
- A-Plastic Anchors
- B-Self-Drilling Screw
Instructions:
- Place the Pedestal against the wall at the desired location.
- Mark off the holes on the wall.
- Drill holes for the Plastic Anchors.
- Secure the Pedestal to the wall using the B-Self-Drilling Screws.
Step 3: Connection of Inner Pole Connector and Outer Pole
Required Components:
- Pedestal
- E-M8204 Spacer
- D-M8*50 Outer Hexagonal Screw
Instructions:
- Insert the Inner Pole Connector into the Outer Pole.
- Place the E-M8204 Spacers on top of the Pedestal.
- Connect the Outer Pole to the Pedestal using the D-M8*50 Outer Hexagonal Screws.
Step 4: Connection of Faceplate and Junction Plate
Required Components:
- Junction Plate
- Faceplate
- F-M8 Nut
- G-8 Washer
- H-M8*45 Screw
- I-M8 Locking Nut
Instructions:
- Attach the Faceplate to the Junction Plate using the F-M8 Nuts and G-8 Washers.
- Secure the Faceplate to the Junction Plate using the H-M8*45 Screw.
- Tighten the screws using the I-M8 Locking Nuts.
Step 5: Hook and Display Installation
Required Components:
- Hang hook
- Screw Package 2
Instructions:
- Use the Screw Package 2 to attach the Hang Hooks to the designated slots on the Faceplate.
Step 6: Hook and Faceplate Installation
Required Components:
- Hang hook
- Screw Package 1
Instructions:
- Use the Screw Package 1 to attach the Hang Hooks to the designated slots on the Faceplate.
Adjusting the Faceplate Position
Instructions:
- To adjust the position of the Faceplate, loosen the screws holding it to the Junction Plate.
- Move the Faceplate up or down to the desired position.
- Tighten the screws again to secure the Faceplate in place.
Maintenance
Instructions:
- Check the tightness of all screws every two months and ensure they are properly fixed.
Frequently Asked Questions
Q: What is the maximum weight capacity of the product?
A: The maximum weight capacity of the product is 10 kg (22 lbs).
Q: Can I adjust the position of the Faceplate?
A: Yes, the Faceplate can be adjusted up and down to the desired position.
Q: How often should I check the screws for tightness?
A: It is recommended to check the screws every two months to ensure they are properly fixed.
For further assistance or inquiries, please contact us at [after-
[email protected]](mailto:[email protected])
Model Number: MC5602
Display Size: up to 70″
Maximum Load: 75kg
Mounting Pattern: 600mm×400mm
Tilt Range: 15°
Profile: 540mm-780mm
Product Components
Screw Package 1
Screw Package 2
Installation Steps
The First Step:Pedestal And Outer Pole Connection(One way is for ±90°Front and rear adjustment;Another way is for 360°rotation adjustment; Customers can choose the way which is needed)
The way of Connection 1
The Second Step: Install the Wall Piece
The Third Step:
Connection of Inner Pole Connector and Outer Pole
The Fourth Step:
Connection of Faceplate and Junction Plate
The Fifth Step:Install the Hook And Display
The Sixth Step:Install the Hook And Faceplate
Please check the screws is fixed or not every two months .
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
[email protected]