ECHOGEAR EGAV-CMIWM2-W1 Mini Grommet Owner’s Manual
- June 15, 2024
- ECHOGEAR
Table of Contents
ECHOGEAR EGAV-CMIWM2-W1 Mini Grommet
Product Usage Instructions
Important Safety Instructions
Before using the product, please read and understand the following safety instructions:
- For low voltage cabling only (HDMI, audio, coax or data cabling), DO NOT run power cords in-wall.
- Read through the instructions completely before starting the installation process.
- Do not use this product for any purpose not explicitly specified by the manufacturer.
- The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
- If you have doubts about the safety of the installation, assembly, or use of this product, contact The Echogear Pros at www.echogear.com.
Verify Wall Compatibility
This Cable Kit is designed to fit into both interior and exterior walls constructed with:
- Minimum Drywall Thickness: 1/2 in.
Step 1: Make Some Holes
Follow these steps to make the necessary holes:
- Assemble the Hole Saw.
- Drill the holes at your desired locations. Make sure to verify your cable length BEFORE drilling.
Note: Walls with blown-in type insulation may require removal of some insulation inside the cavity.
Step 2: Assemble
Follow these steps to assemble the product:
- Insert the Grommets into the holes.
- Lock the Grommets in place.
- Route the Cable(s) through the Grommets.
Note: Do not remove the screws.
TIP
- Use a fish tape to pull cables through the wall.
Step 3: Power Up
- Complete the installation by connecting power to the product.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Yea, the boring stuff … but read it, so you don’t jack things up!
“apologies, to all the Jacks in the world”
CAUTION: Avoid potential personal injuries and property damage!
- For low voltage cabling only (HDMI, audio, coax or data cabling), DO NOT run power cords in-wall.
- Please read through these instructions completely to be sure you’re comfortable with this easy install process.
- Do not use this product for any purpose not explicitly specified by manufacturer.
- Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
- If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact The Echogear Pros at www.echogear.com.
WHAT’S IN THE BOX
WARNING
- DON’T FEED TO CHILDREN! This product contains small items that could be a choking hazard if swallowed.
- Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
TOY SURPRISETOY SURPRISE
Grab Your Tools
Verify Wall Compatibility
This Cable Kit is designed to fit into both interior and exterior walls constructed with:
NOTE: Walls with blown-in type insulation may require removal of some insulation inside the cavity.
Installation Instructions
STEP 1: Make Some HOLES
STEP 2: Assemble (1 grommet illustrated)
Contacts
Confuzzled? Contact the ECHOGEAR Team 7 days a week:
Legrand AV Inc.
- 6436 City West Parkway
- Eden Prairie, MN 55344 USA
- 1-855-428-2490
- ECHOGEAR.com
- helpmehelpyou@echogear.com
Legrand AV Netherlands B.V.
- Franklinstraat 14
- 6003 DK Weert Netherlands
- +44 (0) 800 0568188
- ECHOGEAR.com
- helpme@echogear.com
Authorized Representative for the UK
- Starline Holding Technology Ltd.
- Unit C Island Road Reading RG2 0RP UK
Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
©2022 Legrand AV Inc. All Rights Reserved. ECHOGEAR is a Legrand AV Inc. brand and a registered trademark owned by Legrand. Made in China.
Legrand AV Inc.
- 6436 City West Parkway
- Eden Prairie, MN 55344 USA
References
- ECHOGEAR - Your Gear. Upgraded. | TV Mounts & Accessories
- ECHOGEAR - Your Gear. Upgraded. | TV Mounts & Accessories
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>