suptek MA2720 TV Wall Mount Instruction Manual
- June 14, 2024
- Suptek
Table of Contents
suptek MA2720 TV Wall Mount
Supplied Parts List
（2）Plastic Anchors-A
（2） Self-Drilling Screw-B
（4）M4*10 Screw -C
（4）M5*16 Screw-D
（2）Cable Clips-E
（1）Wrench-F
（1）S5 Allen Key-G
4） 5 Washer-H
（1）Bracket-I
| CAUTION!
---|---
This TV mount must be securely attached to the vertical wall. If the mount is
not properly installed it may fall, resulting in possible injury and/or
damage.
Tools Required|
-
4mm Drill Bit
Phillips -
Screwdriver
|
- 10mm Masonry Bit
- Carpenter’s Level
---|---|---
Note: The mounting components and hardware supplied in this package are
not designed for installations to walls with steel studs or to cinder block
walls.
If the hardware you need for your installation is not included, please consult
your local hardware store for proper mounting hardware for the application.
Step 1 Install the Wall Plate to the Wall
Brick wall
Wood wall
Step 2 Removal of the panel
Step 3 Install the TV
Step 4 Panel installation
Step 5 Fix the panel
Step 6 The cable arrangement and the adjustment of the joint tightness
Installation Instruction
UNPACKING INSTRUCTIONS
- Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
- Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts.
- Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before
beginning the installation, and carefully follow all instructions contained
herein. Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you:
- If you don’t understand these directions or have any doubts about the safety of the installation.
- If you are uncertain about the nature of your wall, consult a qualified installation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaims any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
CUSTOMER SUPPORT
We hope you never have the need, but if you do, our service is friendly and hassle-free.