suptek PR05B Projector Ceiling Mount Bracket Instruction Manual

May 15, 2024
Suptek

suptek PR05B Projector Ceiling Mount Bracket

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-1

Product Specifications

Product Usage Instructions

Measure the Projector fixing holes
Fixing holes must be within the shaded area with minimum 70mm and maximum 300mm distance. Contact customer help line if holes are outside this range.

Prepare the Projector Mounting Bracket
Configurations are not limited to examples shown. Use parts supplied in any configuration to suit your projector size.

Fitting the Projector Mounting Bracket
WARNING: Screw diameter J-M dependent. Attach the bracket to your projector using suitable screw reducer and spacer combinations.

Attach the Projector
Attach the projector to the bracket with extendable pole if required.

Attach Ceiling Bracket to Extendable Pole
If using extendable pole, attach ceiling bracket as per instructions. If not using pole, skip to stage 6.

Fitting the Ceiling Bracket
The fitting process is the same whether mounting on ceiling, wall, or sloping ceiling. Follow instructions carefully for solid wall or wood stud mounting.

Optional Tilt and Turn
The product offers tilt and turn options for adjusting projector position. Ensure proper support before making adjustments.

Cable Management

  • Ensure cables don’t restrict movement.
  • Height adjustable for cable management.

Frequently Asked Questions (FAQ)

  • What should I do if my projector fixing holes are not within the shaded area?
    Contact the customer help line for assistance before proceeding with installation.

  • Can I use different configurations for the projector mounting bracket?
    Yes, configurations are not limited to the examples shown. Use the parts supplied in any configuration to suit your projector.

NOTE

  • Retain all packaging in case the bracket needs to be returned.
  • Contents may vary from photography/ Illustrations.
  • You will not need all these parts, so expect there to be some left over depending upon the specification of your projector This product is intended for indoor use only. Use of this product outdoors could lead to failure and personal injury
  • It is the responsibility of the installer to ensure that the mounting surface is of a suitable standard and avoid of any services (eg gas, electricity, water etc).
  • SUPTEK accept no responsibility for any damage or loss caused by installing this product on a sub standard surface.

Tools Recommended

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-2

Boxed Parts

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-3

Hardware List

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-4

INSTALLATION INSTRUCTION

  1. Measure the Projector fixing holes

    • Fixing holes must be within the shaded area

    • If your Projector fixing holes are not within the shaded area STOP installation now and contact the customer help line

    • You are provided with 4 diameters of Projector fixing screws,M3,M4,M5 and M6 . Determine the screw diameter that fits and remember for step 3.

  2. Prepare the Projector Mounting Bracket

    • Configurations are not limited to the examples shown below . Use the parts supplied in any configuration to suit your projector.

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-7

  * The example shown below is the medium hole configuration.

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-8

  1. **Fitting the Projector Mounting Bracket
    WARNING

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-9

**

  * Attach the bracket to your Projector using suitable screw reducer and spacer combinations
  * After completing step 3 you will have fittings left over please keep for future reference

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-10

  1. Attach Ceiling Bracket to Extendable Pole

    • If you have chosen not to use the extendable pole A 1 , please ignore stages 4 and 5.
    • You will then fit the ceiling bracket as per stage 6.
  2. Different Locations
    Please see below for examples of dif ferent Projector mounting locations

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-13

  1. Fitting the Ceiling Bracket
    Please note, the fitting process is exactly the same if you fit to ceiling, wall or sloping ceiling.

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-19

  1. Attach the Projector

    • With extendable pole

    • Without extandable pole

    • Take two parts apart as shown

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-15

  1. **Cable Management

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-16

**

  1. Optional
    • Tilt and turn

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-20

  * Height adjustable  

Before loosening, make sure the projector is fully supported

suptek-PR05B-Projector-Ceiling-Mount-Bracket-fig-21

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Suptek User Manuals

Related Manuals