suptek ML5273-2 TV Floor Stand Against The Wall Installation Guide
- May 15, 2024
- Suptek
Table of Contents
suptek ML5273-2 TV Floor Stand Against The Wall
WARNING!
Severe personal injury and property damage can result from improper installation or assembly. Read the following warning carefully before beginning.
- If you do not understand the instructions or have any concerns or questions, please contact a qualified local installer.
- Do not install or assemble if the product or hardware is damaged or missing. If you require replacement parts, please contact your local distributor for assistance.
- This product fits most 32″-75″ LCD/plasma screen; load capacity up to 100 lbs/45kg;
- Do not use this product for anything other than the original purpose.
- This product contains moving parts, please use with caution.
Parts
-
Long square tube X2
-
Column X1
-
Base X1
-
Panel X1
-
Hooks X1
-
Plate for fixing column X1
Screw package (for TV installation)
-
G1: M5x20 (x4)
-
G2: M6x20 (x4)
-
H1: M8x20 (x4)
-
H2: D8 Spacer (x4)
-
F: D5 Washer(x4)
-
O: D6 Washer(x4)
Screw package (for floor stand installation)
-
F: M8X60 (X6)
-
G: Φ8XΦ16X1.5 Washer (X4)
-
H: M8 Nut (X4)
-
I: M8X16 (X4)
-
J: Wrench (X1)
-
K: S5 Allen key (X1)
-
L: Bubble level (X1)
-
M: Foot pad (X5)
Installation Instructions
Step 1
Installation of the base and the column and the adjustment of height.
Insert the long square into the base.
Tighten screw I with wrench K as shown.
Tighten screw F with wrench K as shown.
Step 2 Connect panel and column
Step 3 Connect TV and hook
Please use proper screws; leave room between TV and screw (please use higher spacer for long screws in case of tv damage).
Step 4 Connect TV and floor stand
Step 5 Placement
Step 6 Specifications
Customer Support
We hope you never have the need,but if you do,our service is friendly and
hassle-free.
[email protected]