VEVOR CX-01 2 Tier Acrylic Bakery Display Case Countertop Donut Pastry Case Rear Door User Manual
- June 2, 2024
- VEVOR
Table of Contents
VEVOR CX-01 2 Tier Acrylic Bakery Display Case Countertop Donut Pastry
Case Rear Door
Specifications
- Model: CX-01
- Product Size (in): 20.6 x 15.5 x 11.9
- Quantity: 2pcs
- Size: 20 x 13
Product Usage Instructions
Assembly Precautions
- Assemble needs to follow these instructions. Incorrect assembly can be a hazard.
- Wear safety goggles and heavy-duty work gloves during assembly.
- Do not assemble when tired or under the influence of alcohol, drugs, or medication.
- Weight capacity and other product capabilities only apply to a properly and completely assembled product.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
Parts List
| QTY | DESCRIPTION |
|---|---|
| 1 | Base Plate |
Assembly Steps
- Identify each part and check to ensure that all are accounted for.
- Install the silicone base foot at the 4 corners of the bottom.
- Install the tray.
Cleaning
For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint-free cotton cloth.
FAQ
- Where can I find technical support or submit a warranty claim?
- You can contact VEVOR at CustomerService@vevor.com for any product questions, technical support, or warranty-related inquiries.
- What should I do if I encounter missing parts during assembly?
- If you encounter any missing parts during assembly, please contact VEVOR’s customer service for assistance in getting the necessary replacements.
- Is there any specific maintenance required for the Bakery Display Case?
- Regular cleaning as instructed in the manual is recommended to maintain the appearance and functionality of the Bakery Display Case.
We continue to be committed to providing you tools with at competitive prices. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
Thanks for purchasing one of our products.
Please read the assembly instructions carefully before the installation.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please contact us:
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
ASSEMBLY PRECAUTIONS
- Assemble needs to follow these instructions. Incorrect assembly can be a hazard.
- Wear safety goggles and heavy-duty work gloves during assembly.
- Do not assemble when tired or under the influence of alcohol, drugs or medication.
- Weight capacity and other product capabilities only apply to a properly and completely assembled product.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
USE PRECAUTIONS
WARNING : TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. This product is not a toy. Do not allow children to play with or approach
this item.
2. Use as intended only. Do not sit or stand on the product.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Use on flat, level, and hard surfaces only.
5. Do not exceed the listed weight capacity. Tighten all knobs securely
before applying load. Be aware of dynamic loading! The sudden load movement
may briefly create an excess load, causing product failure.
PRODUCT PARAMETERS
PARTS LIST
NOTE : Part not shown to actual size.
ASSEMBLY STEPS
STEP 1
Install the left and right bracket panels on the bottom, pay attention to distinguish the left and right panels. The screw assembly usedisM4×15.
STEP 2
Install the rear cover plate on the frame where the left and right support plates have been installed. The screw assembly used is M4×15.
STEP 3
Install the left and right sealing door panels on the frame, and pay attention to distinguishing between the left and right door panels. The screw assembly used is M4×10.
STEP 4
Install the door handle on the left and right sealing plates. The screw used
is M4×10.
STEP 5
Install the top on and above the frame. The screw assembly used is M4×15.
STEP 6
Install the silicone base foot at the 4 corners of the bottom. Install the
tray.
Cleaning
- For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint-free cotton cloth.
- Support and E-Warranty Certificate www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>