TRAPS CO NZ TRAPS.CO.NZ Sentinel Possum Kill Trap Instruction Manual
- June 2, 2024
- TRAPS CO NZ
Table of Contents
TRAPS CO NZ TRAPS.CO.NZ Sentinel Possum Kill Trap
Product Information
- Product Name: Sentinel Trap Bracket with Tree Mount V2
- Manufacturer: TRAPS.CO.NZ
Specifications
- Designed to securely hold traps in place
- Spring-loaded arms for tensioning
- Tree mount design for easy installation
Product Usage Instructions
Fixing the Bracket to the Tree
To install the Sentinel Trap Bracket with Tree Mount V2, follow these steps:
- Use large staples to fix the bracket to the tree securely.
- Ensure the bottom of the trap can swing away from the tree to prevent animals from backing out.
Fitting Trap to the Bracket
Follow these steps to fit the trap onto the bracket:
- Place the trap onto the bracket ensuring the lower rung is held by the formed catch.
- Tension the spring-loaded arms to secure the trap in place.
- Hooked ends of the arms should hold the spring in place and prevent side-to-side movement of the trap.
FAQ
Q: Can this bracket be used with traps of various sizes?
A: Yes, the Sentinel Trap Bracket with Tree Mount V2 is designed to accommodate traps of different sizes.
Q: How do I adjust the tension of the spring-loaded arms?
A: To adjust the tension, carefully manipulate the spring-loaded arms to increase or decrease the pressure as needed for your specific trapping requirements.
OVERVIEW
Sentinel Trap Bracket with Tree Mount V2
- Fix using large staples. This will allow the bottom of the trap to swing away from the tree, avoiding any leverage the animal may have to back out of the trap.
- Spring loaded arms tension the lower rung against the formed bottom catch. Hooked ends are shaped to hold the spring in place and prevent the trap from sliding left/right.
- Formed catch holds the lower rung, stopping slipping, and fixing the trap firmly in place.
Fitting Trap to the Bracket
- Hang the trap on the spring-loaded arms and pull it down to pop it into place
- Pull the trap down firmly until lower rung fits behind the formed catch. Tension in spring-loaded arms holds the lower rung in place.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>