HAMPTON BAY DS19069 29 Inch 4 Light Brushed Gold Vanity Light User Guide
- June 12, 2024
- HAMPTON BAY
Table of Contents
HAMPTON BAY DS19069 29 Inch 4 Light Brushed Gold Vanity Light
Product Information
- Item Numbers: 1005 533 801 / 313 480 898 / 1005 533 798 / 313 480 899 / 1006 322 048 316 719 722 / 1006 322 126 / 316 719 903 / 1008 422 885
- Model Numbers: DS19069 / DS19074 / DSHD19574V3/ DSHD19574V7 / DSHD19574V11
- Product Name: 4-Light Vanity
- Manufacturer: Hampton Bay
- Customer Service: Call Hampton Bay Customer Service at 1-855-HD-HAMPTON (8 a.m. – 7 p.m., EST, Monday-Friday; 9 a.m. – 6 p.m., EST, Saturday) or visit HAMPTONBAY.COM
- Warranty: Three (3) Year Warranty
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
- For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure could be hazardous or even fatal.
- Before touching any wire, use a voltage tester to make sure it is not live.
- Use tools with insulated handles and ladders made of wood or
- To protect children, place a safety cover over any unused outlets.
DANGER: Before or removal of a pr re, disconnect the power by turning off
the circuit breaker, removing the fuse at the fuse box, or tripping the
breaker that controls that circuit. Tape a sign to the panel warning others to
leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. If you have any non-electrical questions about this fixture, please
call our Customer Service Team at 1-855-HD-HAMPTON or visit HAMPTONBAY.COM.
Please reference the model and item numbers.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before installing. To avoid damaging this product, place
it on a soft, non-abrasive surface, such as carpet or cardboard.
IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or
exposed copper that may have occurred during shipping. If there is a defect in
the wire, do not attempt installation. Please call the Customer Service Team
at 1-855-HD-HAMPTON.
NOTE: You may use four Max 60W medium base (E26) type “ST64” or type “A”
bulbs or four 9W medium base (E26) self-ballasted LED bulbs (sold separately).
TOOLS REQUIRED (NOT INCLUDED)
HARDWARE INCLUDED
PACKAGE CONTENTS
Installation
-
Preparing the bracket plate
- Unscrew the four support screws (short) (FF) from the bracket plate (A). Remove the bracket plate (A) from the support screws (short) (FF) for later use.
-
Installing the bracket plate
- Place the at side of the bracket plate (A) against the wall and mark the location of the two key holes with a pencil (not provided).
- Drill a small hole (6 mm) on each mark and push the plastic anchors (DD) into the wall using a hammer.
- Fasten the bracket plate (A) onto the outlet box using the two outlet box screws (long) (AA). Place the two wood screws (EE) in the keyholes located on the bracket plate (A) and tighten until fully secured.
NOTE: If your wall is wood, do not drill holes. Use the two wood screws and two outlet box screws to secure the bracket plate.
-
Making the electrical connections
- Strip 3/4 in. of insulation from the wire ends.
- The fixture must loop one turn under the head of the green ground screw (BB) on the bracket plate (A) before it is connected to the ground conductor of the supply circuit.
- Cover and tighten the wires with wire connectors (CC). Tape the wire connectors (CC) and wires together, and carefully position all wires inside the outlet box.
-
Attaching the fixture body to the outlet box
- Place the fixture body (B) against the outlet box, align the four holes of the bracket plate (A) and fixture body (B), then tighten the support screws (short) (FF).
- There are two installation options to choose from.
-
Installing the glass shade to the fixture body
- Place the glass shade (C) over the socket, align the three holes of the glass shade (C) and cap of the fixture body (B), then secure the glass shade with the thumbscrews (GG) as shown on the diagram.
-
Installing the light bulbs
- Install the bulbs (not included) into the sockets. Use four Max 60W medium base (E26) type “ST64” bulbs.
- NOTE: You can also use four Max 60W medium base (E26) type “A” bulbs or Max 9W medium base (E26) self-ballasted LED bulbs (sold separately). Do not exceed the recommended wattage.
Care and Cleaning
- Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only dry, soft cloth to dust or wipe carefully.
- To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
Troubleshooting
Service Parts
MODEL: DS19069 / DS19074 / DSHD19574V3 / DSHD19574V7 / DSHD19574V11
Warranty
THREE (3) YEAR WARRANTY WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of three (3) years from date of purchase. This
warranty applies only to the original consumer purchaser and only to products
used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation, and your exclusive remedy, is the repair or
replacement of the product at the manufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alteration, neglect, or mishandling. This warranty shall not apply to any
product that is found to have been improperly installed, set-up, or used in
any way not in accordance with the instructions supplied with the product.
This warranty shall not apply to a failure of the product as a result of an
accident, misuse, abuse, negligence, alteration, faulty installation, or any
other failure not relating to faulty material or workmanship. This warranty
shall not apply to the finish on any portion of the product, such as surface
and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit
HAMPTONBAY.COM.
Questions, problems, missing parts? Before returning to the store, call
Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>