HOOKE ROAD BXG.1012-S Mid Width Front Bumper Plate LED Lights Instruction Manual
- June 2, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.1012-S Mid Width Front Bumper Plate LED Lights
PARTS LIST
Tools required
- a.19mm Wrench；
- b.19mm Socket Wrench；
Installation
Installation time
About 1 hour, 2-3 people may be needed. Installationtimemaydifferaccording to
your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.1012-S), pleasescantheQRcode
Installation instruction
Step 1:
Remove the original front bumper
Step 2 : Assemble the bull bar & the bumper with the Hex Bolts(M820),Split Lock Washer (D8), Flat Washer (M816*1.2).
Step 3:
Install the bumper on the jeep.As shown on the RIGHT.
Step 4 :
Use 19mm Socket Wrench or 19mm Wrench to tighten the bumper with the Hex Bolts
(M1230), Split Lock Washer (D12), and Flat Washer(M1230*2).
- First, Install the upper bolt holes.
- Second, install the bottom bolt hole.
Step 5:
Install another side in the same method.
Step 6:
Install the D-rings
Step 7:
Installation completed.
Attention:
- The product parts in this instruction may differ the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>