HOOKE ROAD BXG2052-S Front Bumper Full Width Climber Bumper Instruction Manual
- June 2, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG2052-S Front Bumper Full Width Climber Bumper Instruction
Manual
Front Bumper: BXG.2052-S
(1) Contents:
(2) Tools required:
a. 19mm Shallow Socket;
b. 19mm Wrench;
c. Drive Socket Ratchet Wrench;
(3) Installation time:
About 1 hour, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.2052-S), please scan the QR code.
(4) Installation instruction:
Step 1: Remove your original bumper. Get ready to install the new bumper.
Step 2: Prepare the Front bumper components for installation (Pay attention to the structure of the Front bumper, make you have some preparation for installation.)
Step 3： Install the bumper to the vehicle. Align the Front bumper to the car bracket. There are 4 holes each side. **Make sure you have an assistant help you hold the bumper, when you install the Screws)
Step 4: The installation is complete. We hope you enjoy a wonderful off- road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>