HOOKE ROAD BXG9904-S High Overland Bed Rack Instruction Manual
- June 2, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG9904-S High Overland Bed Rack
Product Information
- Model: BXG.9904-S
Contents:
| Qty | Part Name | Size (mm) |
|---|---|---|
| 1 | Bed Rack Assembly | – |
| 12 | Button Head Socket Cap Bolts Screws | M10*25 |
| 80 | Button Head Socket Cap Bolts Screws | M10*20 |
| 92 | Flat Washer | M10201.5 |
| 80 | Flange Hex Lock Nuts | M10 |
Product Using Instruction
- Tools Required
- 6mm Hex Bit Socket
- Drive Socket Ratchet Wrench
- Installation Time
- About 1.5 hours, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
- Please verify all parts are present and read the instructions carefully before starting installation.
- Installation Instructions
- Assemble the Leg Section (H6) and the Top Brace (H3) using the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), and Flange Hex Lock Nuts (M10).
- Mount the Top Brace (H1) using the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), and Flange Hex Lock Nuts (M10).
- Mount the Top Brace (H2) using the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), and Flange Hex Lock Nuts (M10).
- Mount the Leg Crossmember (H7) using the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), and Flange Hex Lock Nuts (M10).
- Mount the Side Panel (H4) using the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), and Flange Hex Lock Nuts (M10).
- Adjust the length and width of the bed rack as necessary by stretching the Leg Section (H6) and the Side Panel (H4).
- Fix the bed rack into your vehicle by installing the Clamp Assembly (H5) into the trail rail with the Button Head Socket Cap Bolts Screws (M1020) and Flat Washer (M1020*1.5).
- The installation is complete. Enjoy your off-road adventures with this quality Hooke Road product!
- Attention
- The product parts in these instructions may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Specifications
| Feature | Specification |
|---|---|
| Model | BXG.9904-S |
| Installation Time | About 1.5 hours |
| Required Skill Level | Varies based on mechanical skills |
FAQs
- What tools are needed for installation?
- A 6mm Hex Bit Socket and a Drive Socket Ratchet Wrench are required.
- How long does it take to install the bed rack?
- Installation typically takes about 1.5 hours and may require 1-2 people.
- Can the size of the bed rack be adjusted?
- Yes, the length and width of the bed rack can be adjusted by stretching the Leg Section (H6) and the Side Panel (H4).
- What should I do if the parts in the package differ from the instructions?
- The parts may vary slightly from the instructions but usually do not affect the installation. For any concerns, contact your distributor.
Contents
| Qty | Part Name | Size(mm) | Qty | Part Name | Size(mm) |
|---|---|---|---|---|---|
| 1 | Bed Rack Assembly | 92 | Flat Washer | M10201.5 | |
| 12 | Button Head Socket Cap Bolts Screws | M10*25 | 80 | Flange Hex Lock Nuts | M10 |
| 80 | Button Head Socket Cap Bolts Screws | M10*20 |
PARTS
HARDWARE
Tools required
- a. 6mm Hex Bit Socket;
- b. Drive Socket Ratchet Wrench；
Installation time
- About 1.5 hours, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
- (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
- To view the electronic version (BXG.9904-S), please scan the QR code.
Installation Instruction
- Step 1: Assemble the Leg Section (H6) & the Top Brace (H3). For this, use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10)
- Step 2: Next, mount the Top Brace (H1). To do this, use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).
- Step 3: Mount the Top Brace (H2). Use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).
- Step 4: Mount the Leg Cross member (H7). Use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).
- Step 5: Mount the Side Panel (H4). Use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).
- Notes: If you want to adjust the length and width of the bed rack, please stretch the Leg Section (H6) & the Side Panel (H4). As the picture shows.
- Notes: If you want to adjust the length and width of the bed rack, please stretch the Leg Section (H6) & the Side Panel (H4). As the picture shows.
- Step 6: Fixed the bed rack into your vehicle. Install the Clamp Assembly (H5) into the trail rail with the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5).
- Step 7: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
- @HookeRoad4x4
- Post Your Jeep/Truck: w/Hashtag #hookeroad to Win Discount Every Week
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>