SLV 228555 Mounting LED Light Instruction Manual

SLV 228555 Mounting LED Light

Product Information

Specifications:

• IP Rating: IP44 / IP66
• Safety Class: I (1)
• Energy Efficiency Class: E

Product Usage Instructions

Safety Instructions:

• The installation of this product should be carried out by an approved electrician in compliance with local and national regulations.
• Operate the product only on an even, stable, and tilt-fixed surface. Avoid exposure to strong mechanical stress or dirt contamination.
• The light source must be replaced by the manufacturer, an authorized service technician, or a qualified person.

Cleaning and Storage:

• Disconnect the product from the mains before cleaning and allow it to cool down.
• Clean the external surfaces regularly with a slightly moistened cloth. Avoid using pressure washers and harsh chemicals. Store the product in a dry and clean place.

Placement:
Consider the IP type of the product to ensure suitability for the intended location. Fix the product securely using the provided Screw Set or Ground Spike (SLV 228560).

Putting into Service:

• Connect the mains plug to an outdoor socket. Use a trailing-edge phase dimmer (Code C) for dimming purposes following the manufacturer’s instructions.
• Ensure the product stands securely and functions properly before regular use.

FAQ:

• Q: Who should replace the light source of the luminaire?
  A: The light source should only be replaced by the manufacturer, an authorized service technician, or a qualified individual.

• Q: What type of dimmer is suitable for this product?
  A: Use a trailing-edge phase dimmer with Code C as recommended for dimming this product.

• Q: How should I clean and store the product?
  A: Disconnect the product from the mains, clean it with a slightly moistened cloth, avoid harsh chemicals, and store it in a dry and clean place.

SAFETY WARNINGS

Read the manual carefully and keep it for further use!

• Safety advice for installation and operation.
• Disregarding may lead to danger of life, burning or fire!
• Do not alter or modify the product.
• Do not fasten anything on the product.
• Do not cover the product.
• Operate only with intact protection glass.
• The supply cord may not be covered with soil.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or a qualified electrician to avoid hazard.
• Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
• Take measures that children get not harmed by the product.
• Do not stare into the active light source.
• Additional safety advices =

INCLUDE:

FEATURES

INSTALLATION

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Use as directed

• Safety class I (1) – Connection with protective conductor.
• Operate only on an even, stable and tilt-fixed surface.
• Do not strain mechanically or expose to strong dirt contamination.

Protection against foreign bodies and liquids (IP protection class)

• Luminaire:
  • IP66: Protection against dust (dust-tight) – Protection against strongly jetted water.
• Safety plug, when connected to IP44 plug socket:
  • IP44: Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions.

Light Source
The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class E.

The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.

Care / Storage

• Disconnect the product from the mains and let it cool down.
• Clean external surfaces regularly with a slightly moistened (water) cloth.
• Do not clean with a pressure washer.
• The following influences may have unwanted effects on the product: acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, and chemicals.
• Store dry and clean.

Placement

Consider IP type. It must be suitable for the place of operation.
Types of fixation:

• Screw-Set (supplied): Direct fixation.
• Ground spike (SLV 228560): Fixation in soil.
• Place in a way that the product poses no danger(e.g. stumbling).

Putting into service

• Connect the mains plug with an outdoor plug socket.
• Suitable Dimmer: Trailing-edge phase dimmer (Code C). Note the manufacturer’s instructions.
  Check for secure standing and proper function!

Technical Details are subject to change.

SLV UK
Unit E Chiltern Park
Boscombe Road, Bedfordshire
LU5 4LT

© 20.12.2022 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0. Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>