IPOWER B0BV33K7L7 Duct Speed Humidity Temperature Controller Fan Instruction Manual

IPOWER B0BV33K7L7 Duct Speed Humidity Temperature Controller Fan

Product Information

Specifications

• Panel Color: Black
• Size: 86×86

Frequently Asked Questions

• Q: How do I change the fan speed using the controller?
  • A: You can adjust the fan speed by pressing the Speed Rank Button and using the Up and Down buttons to increase or decrease the speed.
• Q: What does the Temperature Display show?
  • A: The Temperature Display shows the current environment temperature and automatically adjusts the fan speed based on it for optimal comfort.
• Q: How do I set the time on the controller?
  • A: Press the Set Time Button and use the Up and Down buttons to set the desired time on the controller.

Structure Chart

Model NO:| Input voltage| Frequency| Power| Noise| Weight
---|---|---|---|---|---

GLFANXINLINEPR04

| ****

AC110–240V

| ****

50/60Hz

| ****

35W

| ****

2BdB

| ****

1.85kg

GLFANXINLINEPRO6

| ****

AC110–240V

| ****

50/60Hz

| sow| ****

50d8

| ****

2.9kg

GLFANXINLINEPROB

| ****

AC110–240V

| ****

50/60Hz

| ****

53W

| ****

53d8

| ****

3.22kg

Wiring Instruction

Dismounting Diagram

1. Remove the plastic rivet
2. Remove on the other side the plastic rivet
3. Rotation the nozzle
   • Product decomposition
4. Fix the fan with screws
5. Rotate open/close
6. Fixed the plastic rivet

INTRODUCTION

Installation manual (merchant/household)

Thank you for choosing this product, which is designed and manufactured in accordance with EC standards and current technical / safety regulations.

This manual focuses on the safety precautions during the installation, use and maintenance of the product. Therefore, it is necessary to read this manual carefully before installing and using the product, and hand it to the user after the installation of the product. After opening the package, please carefully check whether the product is consistent with your order, whether the parameters on the nameplate can meet your requirements, and check the product status. Any original defect or damage shall be within the scope of the company’s quality assurance.

Carry

• The packaging of this product is suitable for normal transportation conditions. The original packing box must be used for transportation to avoid deformation or damage.
• Before installing the equipment, it shall be stored in a dry environment, in the original packaging, and protective measures shall be taken to prevent the invasion of dust. You may reject the product if there is any discrepancy or obvious sign in the packaging that the product has been used.
• Do not knock or drop the product, or store heavy objects in the packed product.

Safety precautions for Installers and users

• Installation must be carried out by qualified personnel.
• The installation must comply with the specifications of the host country.
• The equipment to be put into operation shall meet the following

Standards:

• The product is suitable for use in the application area specified on the nameplate.
• This equipment is not suitable for use in an environment with explosion or corrosion risk.
• If the fan is used for the exhaust of the boiler or other combustion equipment room, make sure that there is sufficient supplementary air in the room to ensure combustion.
• This product is not suitable for children or infirm people unless supervised by responsible personnel to ensure that they can use this product safely. Do not let children play with this product.

Installation safety precautions

• Make sure that there is no inhalation around the fan.
• When installing the equipment, confirm that all accessories are in place, and the structure of the fan can ensure the load brought by the full load operation of the fan.
• Before using the device, even if the device switch is off, make sure that the power supply is disconnected.
• Check whether the voltage and frequency of the main power supply are consistent with the data specified on the product nameplate.
• The power supply device must have a double pole switch, and the distance between its contacts shall be at least 3mm, and the size and specification shall conform to the relevant power regulations of the host country.
• Please connect the wires as shown in the wiring diagram.
• If you need a grounding wire, please check whether your wiring is correct, and make sure that the overheat and overload protection wires are correctly connected and adjusted to the corresponding range.
• If the fan is installed in a duct, the duct must only be used for this ventilation system.

Start-up

Before starting the machine, make sure:

• The equipment is flrm and the wiring is correct.
• Safety guards are installed correctly.
• Any installation leftovers that can be inhaled by the fan have been removed; the pipes connected with the fan have been cleaned.
• The ground wire is connected correctly.
• The electrical safety device has been correctly connected and adjusted to the proper position.

Product Size

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>