A-iPOWER APW3201KH Pressure Washer User Guide
- October 30, 2023
- A-iPOWER
Table of Contents
A-iPOWER APW3201KH Pressure Washer
Product Information
The product is a pressure washer that is designed to clean surfaces such as cars, decks, patios, driveways, and more. It comes with a handle, gun holder, frame, hose holder, pressure hose, wand, nozzle, and quick connect. The product also includes a Turbo nozzle which has 7 different spray patterns to cater to different cleaning needs. It is important to read the user manual carefully before using the product to avoid any potential safety hazards.
Product Usage Instructions
- Install the handle by attaching it to the frame with the knob button and tighten it.
- Attach the gun holder to the handle and tighten it.
- Fix the hose holder to the panel.
- Connect the pressure hose to the spray gun and tighten the nut firmly by hand.
- Connect the wand to the spray gun.
- Attach the nozzle to the wand via quick connect.
- Make sure the engine is cold and place the lever in choke position. If the engine is warm, place the lever in full throttle/RUN position.
- Turn on the water supply.
- Lock the gun trigger by placing the lever in OFF position.
- Use the Turbo nozzle or any other nozzle of your choice to clean surfaces.
- Turn off the water supply when you are done cleaning.
If you have any questions or concerns regarding the product or its usage, you can call 1-855-888-3598 or email support@a-ipower.com for assistance.
READ AND FOLLOW OWNER’S MANUAL PRIOR TO USE
PRIOR TO STARTING
- Install the handle, tighten the handle and frame with the knob
- Attach the gun holder to the handle
- Attach the hose holder to the panel
- Connect pressure hose to pump
- Connect the pressure Hose to the spray gun and tighten the nut firmly by hand.
- Connect wand to spray gun
- Attach the nozzle to the wand via quick connect
- Connect to the water source & turn ON
STARTING
- Choke positionFull throttle/RUN position
- 1A. Cold engine: Place lever in the choke position
- 1B. Warm engine: Place lever in full throttle/RUN position
- 2. Pull the starter handle repeatedly until the engine starts
- 1A. Cold engine: Place lever in the choke position
PARTS
STOPPING
- Lock gun trigger
- Place the lever in the OFF position
- Turn the water supply OFF
- Release pressure
Failure to read and follow instructions in the manual(s) could result in death, bodily injury, and/or property damage.
Questions?
Call 1-855-888-3598 or email
support@a-ipower.com
32009-00807-01