ATDEC AC-AP-2020 VESA Adaptor Plate Installation Guide

ATDEC AC-AP-2020 VESA Adaptor Plate

Product Specifications:

• Product Name: AC-AP-2020 200×200 VESA Adaptor Plate
• Weight Range: 0 – 30kg (0 – 66lbs)
• Compatibility: Suitable for monitors with VESA mounting hole patterns of 200x200mm

Product Usage Instructions:

Component Checklist:

• A Plate (x1)
• B Countersunk Screw M5x10mm (x4)
• C M5 Nylock Nut (x4)
• D Screw M6x14mm (x4)
• E Screw M8x20mm (x4)
• F Screw M4x12mm (x4)
• G Screw M4x10mm (x4)
• H Nut M4 (x4)
• I Washer M5 (x4)
• J Spacer M8 x 5mm (x8)
• K Washer M8 (x4)

Installation Steps:
Flush Mounting Configuration (Suitable for M5 clearance hole sizes):

1. Fasten adaptor plate to VESA head using screws B and washers I.
2. Mount adaptor plate to monitor using screws D/E and washers K.

Spacer Configuration (Suitable for M4 clearance hole sizes):

1. Fasten adaptor plate to VESA head using screws H and washers I.
2. Mount adaptor plate to monitor using screws F/G and washers K, along with spacers J.

Ensure the fitment is secure and that screws are not forced too deep into the display.

Frequently Asked Questions:

1. Q: What is the weight range for this adaptor plate?
   A: The weight range for the AC-AP-2020 VESA Adaptor Plate is 0 – 30kg (0 – 66lbs).

2. Q: Can this adaptor plate be used with monitors that have different VESA hole patterns?
   A: This adaptor plate is specifically designed for monitors with a VESA mounting hole pattern of 200x200mm. Using it with other patterns may not be compatible.

COMPONENT CHECKLIST

REQUIRED TOOLS

• Phillips Head Screwdriver
• 7mm Spanner

WEIGHT RANGE

• 0 – 30kg
• (0 – 66lbs)

Monitor weight should be within the weight range of all modular elements that make up the complete monitor mounting solution.

IMPORTANT INFORMATION

• Please ensure this product is installed as per these installation instructions.
• The manufacturer accepts no responsibility for incorrect installation.
• Flush Configuration – Recommended for greater than 12kg (26.5lbs)
• Spacer configuration – Suitable for all load unable to be flush mounted
• This product reduces the working capacity of the monitor arm by 1kg (2.2lbs).
• Maximum load for plate only is 30kg (66lbs).
• Curved monitors, deep devices (such as all-in-one PCs), VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.

Flush mounting configuration (Suitable for M5 clearance hole sizes )

Spacer configuration (Suitable for M4 clearance hole sizes )

Check fitment

NOTE:

• Ensure the display brackets are not loose and screws are not forced too deep into the display.
• If spacers are needed, use the shortest possible combination between the display bracket and the display.

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20230413

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>