ATDEC AD-TVAC-SH75 80 Inch Video Conferencing Mobile TV Trolley Installation Guide
- June 9, 2024
- ATDEC
Table of Contents
**ATDEC AD-TVAC-SH75 80 Inch Video Conferencing Mobile TV Trolley
**
COMPONENT CHECKLIST
REQUIRED TOOLS
- Phillips Head Screwdriver
CAPACITY
0 – 11kg (0 – 24lb)
IMPORTANT INFORMATION
- Please ensure this product is installed as per these installation instructions.
- The manufacturer accepts no responsibility for incorrect installation.
- Failure to mount this product correctly may cause serious injury/death during or following installation.
- Do not over tighten screws.
- Product not suitable for use outdoors.
- After installation is complete, check to verify that Shelf is secure and safe for use.
- WARNING! Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the cart may encourage a child to climb on the cart and as a result the cart may tip over on to the child.
Install shelf
-
Remove screws (x4) from Shelf clamp B.
-
Attach Shelf Connectors C to inner column of AD-TVC-75.
-
Insert Shelf Clamp B into Shelf Connectors C.
-
Re-fasten screws through Shelf A.
-
Slide Shelf lip D on the Shelf A.
-
Rotate the Shelf lip D by 90° on Shelf A until it clips in.
ADJUSTMENTS
Height Adjustment
To set the height of the shelf, loosen the screws slide shelf to preferred
height and re-tighten the screws
MAINTENANCE
- Tighten fasteners and check the shelf is secure and safe to use at regular intervals (at least every three months.)
- Please contact your distributor if you have any questions.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20220304