ible Airvida C1 Kids Wearable Ionic Air Purifier User Guide
- June 5, 2024
- ible
Table of Contents
ible Airvida C1 Kids Wearable Ionic
**Air Purifier User Guide**
Airvida C1
Overview
What’s Included
How To Use
- Press power button (left ear of Airvida C1) then the indicator light will come on.
- Wearing Airvida C1 with its necklace. The facial side should face outwards with negative ion vent upwards.
Important: Negative ion vent (carbon fiber brush) should not be covered by anything. Airvida C1’s effectiveness will be optimized when facing the carbon fiber brush to your nose.
4. If wanting to remove sweat stainsonAirvidaC1,wipeAirvidaC1or
itsnecklacewith45% ethanol.
5. Airvida C1’s necklace can be replaced. Take off the necklace by pressing
the end connected to Airvida C1,then turning clock wise to 90 degrees on the
“L” side(this mark can be found onthebackofAirvidaC1).On the “R“ side, press
the end and then turn counter clock wise to 90degreestodisconnect it.
6. There are “R/L“ attached to both ends of the necklace, plug the new
necklace into the “R/L” labeled on the back of Airvida C1.
7. While plugging into “L”, make sure the pointy part aims at groove pattern
on Airvida C1. Press it and then turn counterclockwise to 90 degrees; on the
“R” side, make sure the pointy part aims at groove pattern as well. Press it
and then turn clock wise to 90degrees.
How To Recharge
-
Use micro USB charging cable and adaptor to connect the charging dock to a power outlet.
The charging indicator (on the charging dock) will light up. -
Take off Airvida C1’s necklace from the magnet side, then connect to the charging dock.
Important: When recharging Airvida C1, please turn off the device as negative ions may possibly attach on the magnet of Airvida C1’s necklace. -
Once the charging indicator turns from Red to Green, Airvida C1 is fully recharged.
Charging Time
Approximately 3 hours
Warning
- Do not touch or insert any object into the negative ion vent (carbon fiber brush) when powered on.
- People with pacemakers should consult a doctor before using Airvida C1.
- Do not immerse Airvida C1 in liquid or allow liquid to enter Airvida C1.
- Do not try to disassemble Airvida C1, which may not be safe as Airvida C1 carry a certain amount of voltage inside.
- Keep Airvida C1 away from direct sunlight or any other heat sources.
- Keep away from gas-powered stoves and ovens. Do not use Airvida C1 in areas where is flammable, combustible, or filled in vapors.
- Store and handle Airvida C1 with care. Protect Airvida C1 from strong impact. (Do not drop it.)
How To Clean
Negative ions emitted from carbon fiber brush cause pollutants to be negatively charged. These pollutants may accumulate on the carbon fiber brush and need to be removed from time to time. Therefore, to ensure optimal performance of your Airvida C1, brush the carbon fiber brush with the cleaner in the package to remove the pollutants on it regularly
Important : Turn Airvida C1 off before cleaning. Always wait until Airvida C1 is completely dry before turning on.
For more information, please refer to www.airvida.co Or contact regional distributor
2021 © ible Technology Inc. All rights reserved.
EUB03