HAMPTON BAY 50229 Solar Bollard Light User Guide
- June 3, 2024
- HAMPTON BAY
Table of Contents
HAMPTON BAY 50229 Solar Bollard Light User Guide
Item #1006696857
Model #50229
Questions, problems, missing parts? Before returning to the store, call
Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON I HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this solar path light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Safety Information
WARNING: Your solar light may not function in temperatures below -4°F (-20°C) or above 140°F (60°C).
CAUTION: Use a rechargeable battery only. Recycle or dispose of batteries properly.
CAUTION: Do not open, short circuit, or mutilate batteries as injury may occur.
Warranty
TWO YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this product to be free of defects in material and workmanship for a period of two (2) years from the date of purchase. This warranty only applies to the original consumer purchaser and only to products used in normal use and service. The manufacturer’s only obligation and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modification, alternation, neglect, or mishandling. Proof of purchase and evidence of the manufacturer’s date coding must accompany all warranty claims. The manufacturer’s date coding is printed and adhered to each product.
WHAT IS NOT COVERED
This warranty does not apply to products that are found to have been improperly installed, set up, or used in any way not in accordance with the instructions supplied with the product. This warranty does not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation. Batteries supplied with this product are not included in this warranty. This warranty shall not apply to the finish on any portion of the product, such as surfaces and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. This warranty does not cover consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of the product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit HAMPTONBAY.com.
Pre-Installation
PLANNING INSTALLATION
Ensure the mounting location for your solar light allows the solar panel to receive direct sunlight. Do not locate the product in shaded areas as this will significantly reduce performance.
Position the solar light such that during evening hours the ambient light from other light sources does not affect the photosensor built into the solar panel. High ambient light levels can cause the lamp to turn off during evening hours.
NOTE: The solar light is equipped with a photosensor that turns the unit on at dusk and off at dawn. Ambient light can affect the operation of the photosensor.
TOOLS REQUIRED
PACKAGE CONTENTS
Installation
Installing the light
IMPORTANT: Prior to use, remove the battery isolator tag (F) from the battery compartment and allow it to charge for a full sunny day.
NOTE: Do not use a hammer. If the ground is hard, use water to soften.
- Pull out the ground stake (D) packed inside the lamp pole (C).
- Insert the ground stake (D) firmly into the ground at the installation location. If the ground is too hard, soak the ground with water to soften the ground or drive a metal rod or screwdriver into the ground to create a hole for the ground stake (D).
- Connect the lamp pole (C) to the ground stake (D).
- Connect the lamp shade (B) to the lamp pole (C).
- Connect the top cap (A) to the shade (B).
Maintenance
Replacing the battery
IMPORTANT: Dispose of the battery in accordance with local, state, and federal regulations.
IMPORTANT: When storing any solar product for an extended period of time, remove the batteries. Storing any solar product without regular recharge or removal of batteries could cause permanent damage to the rechargeable batteries.
NOTE: Use one AA size, 500mAh, 1.2V nickel-metal hydride rechargeable battery. For best performance, replace with a nickel-metal hydride rechargeable battery annually.
- Pull out the top cap (A) from the lamp shade (B).
- Unscrew the bottom plate (G) from the top cap (A) and remove it.
- Remove the old battery (E). Replace with a new nickel-metal hydride rechargeable battery. The recommended replacement battery capacity should be 500mAh or above.
- Replace the bottom plate (G) with the three screws (H). Place the top cap (A) back to the lamp shade (B).
Care and Cleaning
- The solar panel should be cleaned periodically with a damp cloth to help maintain optimum performance.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call
Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON I HAMPTONBAY.COM
Retain this manual for future use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>