Shenzhen Gleeman Technology H500 True Wireless Stereo Earphones User Guide
- June 5, 2024
- Shenzhen Gleeman Technology
Table of Contents
Shenzhen Gleeman Technology H500 True Wireless Stereo Earphones
Customer Support
We will reply to you within 24 hours and 100% solve your issues
Packaging List
Product Overview
- Charging Case LED Light
- Charging Port
- Multifunctional Button
- Earphone Mic
- Magnetic Charging Pin
- Earphone LED Light
Power On & Pairing
Approach 1 – With Charging Case
- Take out earphones from the charging case
- Select ‘HS00’ from Bluetooth list
Approach 2 – Without Charging Case
- Power On: Touch the earphones for 1 second. Release when you hear the prompt s ound ‘Power on’ with Blue light on.
- Pairing: Earphones will pair automatically with Left earphone Blue and White light flash alternately
- Select ‘HS00’ from the device’s Bluetooth list
Incoming call
Answer call/End call
Tap the Left I Right earphone once
Reject call
Touch the Left I Right earphone for 2 seconds
Music
Pause I Play
Tap the Left I Right earphone once to pause/ play music in the music mode
(Some phones may require to start a media player first)
Voice Assistant
Tap the Left/ Right earphone 3 times, your device’s Voice Assistant will be
activated with the ‘Beep’ prompt sound
Next Song
Double-tap the Right earphone
Previous Song
Double-tap the Left earphone
Adjust Volume
Touch and hold the Left earphone to decrease volume Touch and hold the Right
earphone to increase volume
Note:
Above functions are not supported when the earphone is used in single. Prompt
sound ‘Beep’will be produced when the volume is changing.
Power Off
Mode 1 With Charging Case
Put the earphones back to the charging case, they will power off
automatically.
Note: Put either one earphone into the charging case, the another earphone will stay connect to the device.
Mode2 Without Charging Case
- Turn off Bluetooth to disconnect the earphones
- Touch either one earphone for 8 seconds to power off both earphones
Single Mode
Single Moae
| ****
Earphone
---|---
With Charging Case
| ****
1. Take out Leftl Right earphone from the charging case
2. Select ‘HS00’ from Bluetooth list
Without
Charging Case
| ****
1. Make sure both earphones are turn off
2. Touch the Left/ Right earphone for 1 second to turn on. Prompt sound ‘Pairing’ will be produced with Blue and White light flash alternately.
3. Select ‘HS00’ from Bluetooth list
Charging
Earphones Charging Status
- Earphones white LED light on: Charging
- Earphones white LED light off: Fully charged
Note: It takes about 1.5 hours to fully charge the earphones
Charging Case Charging Status
- Put the earphones back to the charging case
- Lights on charging case stand for the remaining battery capacity
Note : It takes about 1.5-2 hours to fully charge the charging case
Safety Instruction
Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised that you keep volume levels moderate to low at all times for your safety. Do not use while driving, cycling, operating machinery or performing other activities that require hearing surrounding sounds. Do not use earphones in thunderstorm weather, the earphones may not work properly in the bad weather condition, and may increase the risk of being hit by lightning. Earphones may not work properly under high temperature or high humidity conditions. Do not use any corrosive cleaner/oil to clean the earphones . If the earphones come in contact with liquids, quickly wipe away. If submersed in the water, do not turn the earphones on until it is completely dried.
Tips: Man-made damage and lost are not covered under warranty. Keep the earphones and the packaging out of reach of children.
Q&A
-
Q: Why the music cuts in and out sometimes?
A: Please make sure there is no obstacle between the earphones and your device. Please make sure there is no Microwave oven /Wifi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
Note: Please keep your phone and the earphone as close as possible to ensure a more stable Bluetooth connection. -
Q: What should I do if the earphones stop charging?
A: We recommend you to charge the earphones by using our cable. If our cable do not work, please try to use another charging cable or power source to charge the earphones. -
Q: How to contact ENACFIRE Customer Service Team?
A: If you have any issue with the product, please contact us via support@enacfireglobal.com (US/ CA)/ moongu@enacfireglobal.com {UK). We will reply to you within 24 hours and 100% solve your issue.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference ta radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>