NRGVAULT PWR-PV500-PS and Solar Blanket Bundle User Manual

: June 12, 2024
: NRGVault

Table of Contents

PWR-PV500-PS and Solar Blanket Bundle
Product Information
Maintenance
Tips for Safe Charging
What’s in the Box
Product Usage Instructions

PWR-PV500-PS and Solar Blanket Bundle

Product Information

The PWR-PV500-PS is a portable energy storage power generator
designed for various applications such as emergency relief, outdoor
camping, office equipment, and entertainment. It is compact yet
powerful enough to support small to medium appliances.

Maintenance

General Safety: The NRGVault range of portable
power stations meets high safety and reliability standards. Please
keep the user manual for important safety information. The manual
provides details about the device’s features, specifications, and
guidelines for proper use and care. Failure to follow these
guidelines may result in unit damage or injury.

Tips for Safe Charging

Avoid Overcharging: Disconnect power stations
and devices after the battery reaches full charge to prevent
overheating and reduce battery life.
Pick the Right Power Output: Match the correct
voltage and amp values required by your device. Some power stations
offer multiple output ports, so choose the most suitable one.
Charge Only on Non-Flammable Surfaces: Place
the device and power station on non-flammable surfaces during
charging to prevent heat-related accidents.
Avoid Extreme Environments: Do not recharge
devices or leave the power station in environments with extreme
temperatures. Wait for cooler conditions if possible.
Monitor Charging: Recharge devices while
nearby to quickly disconnect defective batteries or power
stations.

What’s in the Box

Battery Cell Type: LiFePO4 Model: 32700 3.2V/6000mAh x 16
Rated Capacity: 288Wh (16V/18Ah)
Lifecycle Battery Management System
MPPT (Maximum Power Point Tracking) Charging Support
Housing: ABS+PC
Input Options: Wall charge, Vehicle charge, Solar charge,
Type-C, Type-C USB-A (QC3.0), DC5521 12V Car Socket
Output Options: 2 x AC, DC port: 2-28V, 5A, XT60 port: 12-28V,
5A, PD 100W, PD 30W, QC3.0
LED Light Modes: 1-Light, 2-SOS, 3-Emergency
Dimensions: [Dimensions]

Product Usage Instructions

Ensure the power station is fully charged before use.
Connect your device to the appropriate output port using the
correct cable.
If using a power station with multiple output ports, select the
port that matches your device’s voltage and amp requirements.
Place the power station and device on a non-flammable surface
during charging.
Avoid charging in extreme temperature environments to prevent
damage to the power station and device.
Monitor the charging process and disconnect the device if any
issues or defects are detected.

User Manual PWR-PV500-PS

INTRODUCTION
This product is a portable energy storage power generator. It can be used as a power source for emergency relief, outdoor camping, office equipment, entertainment and much more. It is compact enough for portability but capable enough to power small to medium appliances.
MAINTENANCE
· Clean with a soft dry cloth only. DO NOT use any water or liquids as this could lead to damage of internal components and electric shock.
· When not using the unit for extended periods, disconnect from the power outlet and any connected devices, then power off the unit.
· Charge the unit to approx. 80% battery every 3 6 months during extended periods of storage.
· Indoor storage only.
· Recommended storage temperature: 0 – 25°C.

GENERAL SAFETY

The NRGVault range of portable power stations has been made to the highest standards for safety and reliability. Please retain the user manual for important safety information about your device. This manual will help you learn the features and specifications of the device to assist with operability and satisfaction during use. Failure to follow these guidelines for proper use and care of your device may result in damage to the unit, or injury to yourself and others.

· Keep children and pets away from the device.
· DO NOT expose the unit to fire, liquids, dirt, or other contaminants as this could lead to fire or electric shock.
· DO NOT place the unit on an unstable, uneven, or slippery surface.
· Always use the unit in a well ventilated and spacious area.
· DO NOT dismantle, crush, puncture, or squeeze the unit.
· DO NOT insert any foreign objects into the vents, ports, or other openings.
· Always operate or store the device in accordance with the specified temperature range.

· NEVER use a damaged device or a device with a damaged battery with this unit. This may lead to fire, fluid leaks, overheating, or explosion.
· Use approved accessories only. Improper use or incompatible accessories may result in fire, explosion, or other safety hazards.
· DO NOT place other objects on top of the unit during use or storage.
· DO NOT attempt to modify, repair, or replace any internal components of the unit. If necessary, please contact the manufacturer.
· Turn off immediately in case of malfunction or smoke.

· DO NOT ignore warnings from other manufacturers when using this device.

· Use dry powder fire extinguisher in case of fire.

TIPS FOR SAFE CHARGING
1. AVOID OVERCHARGING. Disconnect power stations and devices after the battery reaches a full charge. Leaving devices on a power station too long may cause them to overheat and can reduce battery life.
2. PICK THE RIGHT POWER OUTPUT. Take special care to match the correct voltage and amp values your device requires when using a power station. Some power stations have multiple output ports so check which one might be the most suitable for your device.
3. CHARGE ONLY ON NON-FLAMMABLE SURFACES. Devices and power stations can get warm or sometimes even hot during charging. Make sure to always place the device and power station on a non-flammable surface when charging. Do not place on beds, pillows, paper, or near any fabric such as curtains or clothing under any circumstances.
4. AVOID EXTREME ENVIRONMENTS. Do not recharge your devices or leave a power station in environments where extreme temperatures can occur. On particularly hot days do not charge or leave your power station in places such as the inside of a car, or an unairconditioned room. If it’s possible, try and wait till the evening when temperatures are a bit cooler.
5. MONITOR CHARGING. Recharge your devices while you are nearby, preferably in the same room or another room close by. This way when there is a defective battery or power station, you are able to disconnect it immediately.

WHAT’S IN THE BOX
· PWR-PV500-PS Portable Power Station · AC Charging Cable · User Manual

PRODUCT SPECIFICATIONS

No.

Item

1 Battery Cell

2 Rated Capacity

Description
Battery Cell Type: LiFePO4 Model: 32700 3.2V/6000mAh x 16
288Wh (16V/18Ah)

3 Lifecycle
Battery 4 Management
System
5 MPPT

2500 cycles to 80%
Under/Over Voltage Protection, Over Current Protection, Short Circuit Protection, Overcharging Voltage Protection, Over Temperature Protection, Overload Protection.
Supports Solar Power MPPT charging

6 Housing

ABS+PC

7 Input Options

8

Output Options

Wall charge Vehicle charge
Solar charge Type-C Type-C USB-A (QC3.0) [3] DC5521 12V Car Socket

2 x AC

9 LED Light Modes LED Light Modes

220-240V/50Hz Max 300w

DC port: 2-28V, 5A

90W

XT60 port: 12-28V, 5A

90W

PD 100W [1]

PD

PD 30W [2]

PD

QC3.0 [3] Max 18W QC3.0 [3]

13.6V/8A Max 108.8 W
13.6V/8A Max 108.8 W

Total share 8A

AC: 220-240V~ 50Hz Rated Power: 500W Overload Protection: 550W 30s Inverter Peak Power: 600W 1s

1-Light 2-SOS 3-Emergency

Power: 3W

10 Dimensions

245 x 160 x 209mm

11 Weight

5.15kg

1. PD 100W = USB-C Power Delivery can deliver up to 100W of power. 2. PD 30W = USB-C Power Delivery can deliver up to 30W of power. 3. QC3.0 = Quick Charge 3.0 can charge devices up to 4 times faster than conventional charging.

GENERAL SPECIFICATIONS

No.

Item

1

Battery Cell Standard Voltage

2 Cells Configuration

3.2V 5S3P

Parameter

3 Battery Pack Voltage

16V

4 Output Waveform

Pure Sine Wave

5 Operating Environment 0~40°C

6 Working Humidity 7 Storage Temperature 8 Standby Time

20%~90% No condensation at 20-90% of humidity
Normal indoor storage temperature. Recommended storage temperature: 0 ~ 25°C (Range)
Recommend: Recharge every 3 months. Required: Must be recharged every 6 months.

USE CASE
(approximations only)
Table Lamp 50 hours
iPhone 12 20+ Charges
Tablet 8+ Charges
Laptop 3 – 4 Charges
Camera 15+ Charges
Drone 5+ Charges

Mini Fridge 4 5 hours
Cordless Drill 8+ Charges
Fan 6 hours
CPAP Device 5 6 hours
TV 3 hours
Bluetooth Speaker 30+ Charges

PRODUCT DIAGRAM

1 – Handle 2 – AC Output Port 3 – Dust Cover 4 – 12V Car Socket 5 – DC Output Port 6 – LCD Display 7 – LED Torch 8 – LED Torch ON/OFF Switch 9 – Cooling Hole 10 – Cooling Hole 11 – Ground Connection

12 – DC Input Port 13 – Solar Panel Input Port 14 – DC ON/OFF Switch 15 – AC ON/OFF Switch 16 – Main Power Button 17 – QC3.0 USB-A Output Port 18 – PD30W USB-C Output Port 19 – PD100W USB-C Output Port 20 – USB ON/OFF Switch 21 – Dust Cover 22 – AC Input Port

LCD DISPLAY

1

Battery Information

2

Indicator

3

4 Input Indicator
5

6 Output Indicator
7

Remaining time

Indicator

8

9

Protection Indicator

10

11

Battery Power Level %

12

Battery Power Level

13

Battery Lock Protection

AC Input

14

Solar Input

15

AC Output Indicators

16

USB Output Indicators

17

18 Remaining discharge/ charge time
19

System Failure Indicator

20

Over Temperature Indicator

21

Low Temperature Indicator

Battery failure/low voltage indicator Battery high/low temperature indicator
DC Input
Input Power DC/Car Outlet Output
Output power
Minutes
Hours Overload Protection Indicator Over Temperature Protection Indicator

CHARGING
· Please charge the PWR-PV500-PS before using. · Charge the battery to 80% before extended storage. Check the PWR-PV500-PS remaining power level every 3-6 months and charge again. · There are 3 input ports on the PWR-PV500-PS: 1 x AC input port. 1 x Solar input port. 1 x DC5521 port.
AC CHARGING
· AC Charging: AC power supply (such as a wall socket) can be used to charge the PWR-PV500-PS with a maximum power of 300W through the AC charging port (figure 22 in Product Diagram).
· A full charge via AC charging takes approx. 80 minutes.
AC

SOLAR CHARGING
· The PWR-PV500-PS supports Solar Panel charging rated at 90W. · Solar power can be used to charge the PWR-PV500-PS with a maximum power of 90W through the XT60 port (figure 13 in Product Diagram) · A full charge from a 90W Solar Panel will take between 4-7 hours (dependant on sunlight intensity).
Solar Panel and XT60 cable not included
CAUTION: · The maximum voltage of solar panels that the PWR-PV500-PS can support is 28V, and the maximum current is 5A. · The PWR-PV500-PS must be charged by solar panels with a voltage lower than 28V. · If the input voltage exceeds 28V it has a risk of damaging the product.

CAR CHARGING
· PWR-PV500-PS supports car charging rated at 90W. · The 12V socket in a car can be used to charge the PWR-PV500-PS with a maximum power of 90W through the DC port (figure 12 in Product Diagram). · A full charge via a 12V car charger will take approx. 3-4 hours. Note: A 12V DC5521 cable (sold seperately) is required.
CAUTION: · The maximum voltage of car charging the PWR-PV500-PS can support is 28V, and the maximum current is 5A. · The PWR-PV500-PS must be charged by car with a voltage lower than 28V. · If the input voltage exceeds 28V it has a risk of damaging the product.

HOW TO USE AC OUTPUT

Under the condition that the total power does not exceed 500W, all AC outlets can work together at the same time.

1. Long press the main power button 3 seconds to turn on. The main power indicator and the screen lights up, then enters the standby state.

2. Plug in AC appliances.
3. Tap the AC on/off switch to turn on the AC output function. The product starts to supply power to external AC appliances.
4. Long press the AC power on/off switch to turn off the AC output.

5. When not using the product for a long time, please long press the main power switch for 3 seconds to turn off to save
power.

AC ON/OFF

POWER ON/OFF

NOTE: When the AC out function is turned on, the AC icon on the LCD display will light up, then perform a system power check for approx 8-10 seconds. After the checks are complete, AC power output will be available.

HOW TO USE DC OUTPUT
1. Long press the main power button to turn on. The main power indicator and the screen light up, then enters the standby state. 2. Plug in the DC device. 3. Tap the DC on/off switch to turn on the DC function. 4. After use, tap the DC on/off switch to turn off the DC output. 5. When not using the product for a long time, please long press the main power switch for 3 seconds to turn off to save power.
CAUTION: When using the PWR-PV500-PS, please do not plug the DC input cable into the DC output connector. This could damage the product.

HOW TO USE USB OUTPUT
1. Long press the main power button to turn on. The main power indicator and the screen light up, then enters the standby state. 2.Tap the USB on/off switch to turn on the USB function. 3.Plug in the USB device.
CAUTION: When using the PWR-PV500-PS, please do not plug the DC input cable into the DC output connector. This could damage the product.

HOW TO USE THE LED LIGHT
1. Press and hold the main power button for 3 seconds to power on. 2. Press and hold the LED light button for 3 seconds to turn on the half-bright mode of the LED light. 3. After the half-bright mode is turned on, tap the LED light button to cycle through the following modes: Full-Brightness, SOS and Strobe. 4. After the strobe mode , tap the LED light button again to turn off the LED light. 5. In any mode of the LED light, as long as you press and hold the LED light button for 3 seconds, the LED light can be turned off.
2 1

TROUBLESHOOTING
DEVICE NOT CHARGING: · Power off/on your device and try charging again.
· Try using another charging cable from your device to the PWR-PV500-PS.
· If using AC or DC output, make sure their respective switches are set to ON.
· Check the device you are trying to charge does not exceed the power rating for the output port being used.
· Check battery levels on the PWR-PV500-PS
DEVICE OR POWER STATION GETS HOT DURING CHARGING:
· It is normal for a device and the power station to generate heat during charging. If you feel that either are too hot, then unplug the device from the power station and wait till it has cooled down.
THE POWER STATION IS NOISY: · The power station uses an air-cooled system with built-in fans working to help dissipate heat. The fans may spin faster or slower depending on workload.
CAN I TAKE THE PWR-PV500-PS ON A PLANE?
– No, the battery in the unit exceeds the 160Wh regulation.

TROUBLESHOOTING
continued…
HOW DO I CHARGE THE PWR-PV500-PS?
– The PWR-PV500-PS has 3 charging inputs. AC (Wall Socket), XT60 (Solar Panel) and DC (Car). An AC cable is included for charging via a wall socket. The XT60 and DC cables are not included.
HOW DO I KNOW IF THE PWR-PV500-PS IS FULLY CHARGED?
– Check the LCD display. The power level is indicated as a battery icon and a % number.
HOW DO I KNOW HOW MUCH POWER THE PWR-PV500-PS IS SUPPLYING TO A CONNECTED DEVICE?
– Check the LCD display. The estimated time a connected device can run for will be indicated on the display.
CAN THE PWR-PV500-PS OUTPUT POWER TO ANOTHER DEVICE WHILE IT IS BEING CHARGED?
– Yes, the PWR-PV500-PS can output power while being charged.
CAN THE PWR-PV500-PS SIMULTANEOUSLY CHARGE MULTIPLE DEVICES?
– Yes, all the output ports on the PWR-PV500-PS can be used at the same time as long as the total power output does not exceed 500W.

for yTohuarnpkuyrcohuase!
To get the most out of your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

Visit our websites

www.laserco.com.au

www.nrgvault.com.au

Check us out at www.youtube.com/lasercoau