mesko MS 2109 Conical Curling Iron User Manual
- June 13, 2024
- mesko
Table of Contents
MS 2109
Conical Curling Iron
User Manual
MS 2109 Conical Curling Iron
SAFETY
CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V, ~50/60Hz . For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a
professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user. -
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let cord hang over edge of counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
WARNING: Do not use this equipment near water.
-
WARNING: Do not use this equipment near bathtubs, showers, swimming pools or similar bodies of water.
-
If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
-
Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again.
-
Do not touch the device or power adaptor with wet hands.
-
The device has to be turned off after every use.
-
Do not leave the unit on to the wall outlet or power supply unit unattended.
-
If the device utilises a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.
-
Keep the device out of the reach of children. Using the devices by children must be supervised by adults.
-
The power cord should not touch hot parts of the device and should not be located near other heat sources.
-
Do not wrap electric cable around the device.
-
Do not use a hair curling iron in the bath.
-
Do not remove dust or foreign bodies from the inside of the hair straightener using sharp objects.
-
Do not use outdoors or where aerosols are being used or where oxygen is being administered.
-
Do not cover the hair curling iron, it might cause the accumulation of heat in its interior and it may cause damage or fire.
-
Hairsprays contain flammable materials. Do not apply them while using the device.
-
The device can be supplied only with the voltage specified on the housing.
-
After use, turn off and unplug the unit. Wait until the device cools down before storing.
-
Do not use the device on people who are sleeping.
-
During operation, do not place the device on wet surfaces or clothes.
-
During the operation ceramic plates heat up to high temperatures. Do not touch hot parts of the hair curling iron and do not allow contact with the skin of the head, because it may cause burns
-
The device is not designed to work with external schedulers or separate remote control system.
DESCRIPTION OF THE DEVICE
- Ceramic hair shaft
- Handle
- On/Off indicator lamp
- On/Off switch
USING THE DEVICE
Use a device on washed, brushed and dry hair.
-
Before starting the device, the electrical wire should be fully unrolled.
-
Insert the plug into the socket.
-
Indicator will light up, indicating the hair curling iron is working (3).
-
Turn the switch of hair curling iron (4).
-
Start with separating a strand of hair.
-
Wind the hair strand onto the iron, starting at the hair tips and coming closer to the head.
CAUTION: Avoid touching the head skin with the curling iron – this may cause burns. -
In order to achieve strong effect keep the wound strand of hair on the curling iron for 20 seconds, or shorter for gentle curls or crimps.
-
After the use switch the curling iron off with the power switch (4), then remove the plug from the power socket.
CLEANING
- Before cleaning, remove the plug from the socket and wait until straighteners cool down.
- The casing should be cleaned with a damp cloth. Do not submerge in water or other liquids.
- Do not wind the power cable to the device.
TECHNICAL DATA
Voltage: 220-240V ~ 50/60Hz
Power 25W, Power max: 40W
Device is made in class II of insulation.
Device is compliant with EU directives:
– Low voltage directive (LVD)
– Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
To protect your environment: please separate carton boxes and plastic bags and
dispose them in corresponding waste bins. Used appliance should be delivered
to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
AFTER SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the
seller who issued the receipt directly.