PORTA WB-201 Full Pedestal Bathroom Basin Instruction Manual

PORTA WB-201 Full Pedestal Bathroom Basin

Specifications :

• Product: Basin With Pedestal

Parts Supplied

• A – Basin x 1
• B – Pedestal x 1

Fixings and Tools Required:
Fixings Required for wall type. Tools Required.

Safety Information:
Vitreous china is fragile and should be handled with care.

Before You Start:
Ensure you have plenty of space and a clean, dry area for assembly.
Check with your vendor for assistance.

Assembly of the Basin:

1. Fit the taps and waste to the basin following provided instructions.
2. Place the basin (A) on the pedestal (B) close to the wall. Ensure it is level and against the wall.
3. Mark hole positions on the wall from the underside of the basin.
4. Drill holes in the marked positions, ensuring no wires or pipes are damaged.
5. Secure the basin to the wall, making sure it is level. Do not overtighten.
6. Connect the basin to water supply and waste system. Check for leaks.

Tools Required

• Sealant
• Spirit Level

FAQ (Frequently Asked Questions):
Q: Is the basin made of durable material?
A: Yes, the basin is made of vitreous china which is durable but should be handled with care.

Basin With Pedestal

Instruction

Parts Supplied

Fixings Required

• Suitable for wall-type

Tools Required

• Adjustable spanner
• Drill
• Suitable drill bit
• Pencil
• Spirit level
• Bathroom-grade sealant and gun

Safety information

• Vitreocuhsinais fragile and should be handled with care.

Before you start

• Check the pack and make sure you have all the parts listed above. If not, contact your vendor, who will be able to help you.
  When you are ready to start, make sure that you have the right tools to hand, plenty of space and a clean, dry area for assembly.
  Ensure that the water feed and waste connection points are positioned appropriately for the installation.

• Please note: always ensure that the walls are correct for the wall.

• Plasterboard or stud walls may require specialized

• Caution: care should always be taken when drilling into walls and to avoid any sunken wires or pipes.

• Please note: although these instructions are comprehensive, it is always recommended that a technically competent installer should undertake the installation.

Assembly of the basin

1. Fit the taps and waste to the basin in accordance with the instructions provided.

2. Place the basin (A) on the pedestal (B) close to the wall and gently maneuver into the installation position. Ensure that the basin is level using a spirit level and is against the wall. (see Fig. 1 ). From the underside of the basin, mark the position of the holes on the wall (see Fig. 2 ). Remove the basin and pedestal from their position in the room.

3. Using a suitable drill bit, drill two holes in the positions marked. Caution: care should be taken when drilling into walls and to avoid any sunken wires or pipes.

4. Place the basin and pedestal back into position. Secure the basin to the wall using suitable making sure that the basin is level and
   Do not overtighten the as this may damage the basin.

5. The basin is now ready for connection to a water supply and waste system. When connected, check the brassware connections for leaks. Run a small amount of water in the basin and check all waste connections for leaks. Apply sealant using gun as and where required.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>