PORTA PHONE 900 MHz or 2.4 GHz Base Station Conference Module User Manual
- June 10, 2024
- PORTA PHONE
Table of Contents
PORTA PHONE 900 MHz or 2.4 GHz Base Station Conference Module
Product Information
This product is a conference module that can function on two different bands, 900 MHz and 2.4 GHz. The device has a belt clip with a left button that allows the user to switch between the two bands. The device also has a link port that can be used to connect two DBX Conference Modules for capacity expansion and function synchronization. The device has been tested and meets the FCC/ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Porta Phone Company Inc may void the user’s authority to operate the equipment.
Product Usage Instructions
To switch between the 900 MHz and 2.4 GHz bands, press the left button under the belt clip. To expand capacity and synchronize functions, use the link cable to connect two DBX Conference Modules. It is important to note that this device has been tested and meets the FCC/ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. Users should take precautions to prevent possible hearing damage by not listening at high volume levels for long periods. If there are any issues with the device or questions about usage, users should consult the dealer or an experienced radio/TV technician for help.
USER MENU (900 MHz / 2.4 GHz Base Station Conference Module)
Power ON/OFF
- Power ON: Turn the volume knob clockwise to turn the power ON.
- Power OFF: Turn the volume knob anticlockwise to turn the power OFF.
Pairing(Register mode)
- Enter the pairing mode: Press button #1 or #2 under the belt clip and hold 3 seconds, till to the LED blinks.
- The main headset enters the pairing mode first then also the module to pairing mode.
- The LED of the module will several blink fastly then turn off after paired, turn the power OFF to quit the pairing mode.
- Press the power button to OFF the Main headset to finish the pairing(register).
Talking and listening
- The main headset and module will start to search for each other after powering ON, the headset will be linked together automatically.
- Press the volume knob to adjust the wired headset speaker sound volume.
Band-switching
- Press the left button under the belt clip to switch the band between 2.4G and 900MHz.
Link port
- Use the link cable to connect 2 DBX Conference Modules for capacity expansion and function synchronization.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
For body-worn operation, this device has been tested and meets the FCC/ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by Porta Phone Company Inc
may void the user’s authority to operate the equipment.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
To prevent possible hearing damage, do not listen at high volume levels for long periods
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>