PORTA PHONE EVXR 2.4 GHz Transceiver-Remote User Manual
- June 6, 2024
- PORTA PHONE
Table of Contents
USER MENU
Power ON/OFF
Power ON: Press and hold the power button till to GREEN LED blinks or light
up.
Power OFF: Press and hold the power button till to the RED LED flashing.
Pairing(Register mode)
a). Press and hold the power button to turn headset power ON, the power LED
should blink in Green color.
b). Enter the pairing mode: Press the volume down button at 3 times
continually, then press and hold the volume up till to the RED and Green LED
blinking at alternately.
c). Main unit enter the pairing mode first then also the Remote to pairing
mode.
d). The Green LED of Remote headset will several blinks fastly then turn off
after paired, press the power button to quit the pairing mode, keep the Main
unit on the pairing mode then can pair with more Remote or press the power
button to quit the pairing mode.
e). Repeat the above step “d” for more Remote headsets paired with the same
Master, or press the power button to finish the pairing(register). (Note: .
The Mani headset can accept maximum 8 remotes register in full-duplex, or all
the remotes fixed on listening mode, total register number over 250 headsets
available on listening mode.
Talking and listening
a). The Main and Remote headset will start to search each other after power
ON, the GREEN LED flash 1 time every 3 seconds. The headset will be linked
together automatically when the pairing ID is confirmed by the master and the
LED turns ON in GREEN color.
b). Press the volume up and down button to adjust the headset speaker sound
volume.
Mic Muted
The headset Microphone stopped automatically when the Mic boom swivel up.
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment has been tested SAR and complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
IC Warning:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment has been tested SAR and complies with IC RSS-102 radiation
exposure limits set forth for an uncontrolled environment. This device and its
antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
To prevent possible hearing damage, do not listen at high volume levels for
long periods
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>