Porta Phone DBX Smartphone User Manual
- June 6, 2024
- PORTA PHONE
Table of Contents
DBX USER MENU
Power ON/OFF
Power ON: Press and hold the power button till to GREEN LED blinks or light
up.
Power OFF: Press and hold the power button till to the RED LED flashing.
Pairing(Register mode)
a). Press and hold the power button to turn headset power ON, the power LED
should blink in Green color.
b). Enter the pairing mode: Press the volume down button at 3 times
continually, then press and hold the volume up till to the RED and Green LED
blinking alternately.
c). The main headset enters the pairing mode first then also the Remote to
pairing mode.
d). The Green LED of Remote headset will several blinks fastly then turn off
after paired, press the power button to quit the pairing mode, keep the Main
headset on the pairing mode then can pair with more Remote or press the power
button to quit the pairing mode.
e). Repeat the above step “d” for more Remote headsets paired with the same
Main headset, or press the power button to finish the pairing(register).
(Note: 1 The Main headset can accept a maximum of 8 remotes registered
in full-duplex, or all the remotes fixed on listening mode, total register
number of over 250 headsets available on listening mode.
Talking and listening to
a). The main headset and remote headset will start to search each other after power ON, the GREEN
LED flash 1 time every 3 seconds. The headset will be linked together automatically when the pairing ID is confirmed by the main headset and the LED turns ON in GREEN color.
b). Press the volume up and down button to adjust the headset speaker sound volume.
Band-switching
Press the button under the ear pad to switch the band between 2.4G and 900MHz.
Mic Muted
The headset Microphone stopped automatically when the Mic boom swivel up.
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment has been tested SAR and complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
IC Warning:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment has been tested SAR and complies with IC RSS-102 radiation
exposure limits set forth for an uncontrolled environment. This device and its
antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
To prevent possible hearing damage, do not listen to high volume levels for long periods
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>