PORTA PHONE ULP16-MS Single Speaker User Guide

PORTA PHONE ULP16-MS Single Speaker

Product Information

Model No. : ULP16-MS (Single speaker)

Specifications:

• Headset Type: Single speaker
• Wireless Technology: Bluetooth
• LED Indicator: Green (on pairing and connection)
• Microphone: Built-in
• FCC Compliance: Part 15

Product Usage Instructions

Pairing the Headsets:

• Power on both the main headset and the remote headset. The GREEN LED on both headsets will flash once every 3 seconds, indicating they are searching for each other.
• The headsets will automatically link together when the pairing ID is confirmed by the main headset, and the LED turns ON in GREEN color.

Adjusting Speaker Volume:
Press the volume up and down buttons on the headset to adjust the speaker sound volume.

Conference Mode:
To separate the 15 headsets into 2 groups or have all headsets in conference mode, follow these steps:

• Locate the switch on the lower side of the ear cup of the main headset.
• Move the switch to separate the headsets into 2 groups or keep them in conference mode if the remote headset has been registered in both groups.

Microphone Muting:
The headset microphone automatically stops when the Mic boom is swiveled up.

Frequently Asked Questions (FAQ)

1. Does this device comply with FCC regulations?
   Yes, this device complies with part 15 of the FCC Rules.

2. Can I modify or make changes to the device?
   No, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

3. Is there a risk of hearing damage when using this product?
   To prevent possible hearing damage, it is recommended not to listen at high volume levels for long periods.

Power ON/OFF

• Power ON: Press and hold the power button till to GREEN LED blinks or lights up.
• Power OFF: Press and hold the power button till to the RED LED flashes.

Pairing (Register mode)

• Press and hold the power button to turn the headset power ON, the power LED should blink in Green color.
• Enter the pairing mode: Press the volume down button 3 times continually, then press and hold the volume  up till to the RED and Green LED blink alternately.
• The main headset enters the pairing mode first then also the Remote to pairing mode.
• The Green LED of the Remote headset will blink quickly and then turn off after paired, press the power button to quit the pairing mode and keep the Main headset on the pairing mode then can pair with more Remotes or press the power button to the pairing mode.
• Repeat the above step “d” for more Remote headsets paired with the same Main headset, or press the power button to finish the pairing(register).
• The Main headset can accept a maximum of 15 remotes registered in full duplex, the power LED will flash in an ORANGE color when the register remote reaches 15., press the power button to quit the pairing mode)

Talking and listening

• The main headset and remote headset will start to search each other after powering ON, the GREEN LED flashes 1 time every 3 seconds. The headset will be linked together automatically when the pairing ID is confirmed by the main headset and the LED turns ON in GREEN color.
• Press the volume up and down  button to adjust the headset speaker sound volume.

CONFERENCE on MAIN

Press the switch located lower side of the ear cup to make 15 headsets to separate 2 groups or all in CONFERENCE if the remote headset has registered in 2 groups.

Mic Muted

The headset Microphone stopped automatically when the Mic boom swiveled up.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The device has been tested and complies with FCC/ISEDC SAR limits. To prevent possible hearing damage, do not listen at high volume levels for long periods.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>