PCE Instruments PCE-HVAC 3 Environmental Meter User Manual

: June 12, 2024
: PCE Instruments

Table of Contents

PCE Instruments PCE-HVAC 3 Environmental Meter
Product Information
Product Usage Instructions
Safety notes
Specifications
System description
Getting started
Operation
Maintenance
Contact
PCE Instruments’ contact information
Documents / Resources

PCE Instruments PCE-HVAC 3 Environmental Meter

PCE-Instruments-PCE-HVAC-3-Environmental-Meter-product

Product Information

The PCE-HVAC 3 Environmental Meter is a device that measures various environmental parameters. It is designed to provide accurate measurements and is equipped with a clear display for easy reading.

Some key specifications of the PCE-HVAC 3 Environmental Meter include:

Technical Specifications:
- Version: DE Version 1.0, EN Version 1.0
- Download Link:www.pce-instruments.com
Delivery Contents:
- Device

Product Usage Instructions

Safety notes

Before using the PCE-HVAC 3 Environmental Meter, please read the safety information provided in the user manual.

Specifications

Refer to the user manual for detailed technical specifications of the device.

System description

The device features a clear display that provides information about the measured environmental parameters.

Getting started

To power the PCE-HVAC 3 Environmental Meter, follow these steps:

Ensure the device is connected to a power source.

Operation

To operate the PCE-HVAC 3 Environmental Meter, follow these steps:

Ensure the device is powered on.
Refer to the user manual for specific instructions on using the various features and functions of the device.

Maintenance

For information on how to properly store and maintain the PCE-HVAC 3 Environmental Meter, refer to the user manual.

Warranty

Refer to the user manual for details on the warranty provided for the PCE-HVAC 3 Environmental Meter.

Disposal

For information on how to dispose of the PCE-HVAC 3
Environmental Meter, refer to the user manual.

Thank you for purchasing a thermo-hygrometer from PCE Instruments.

Safety notes

Please read this manual carefully and completely before you use the device for the first time.
The device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
The device must only be used as described in this instruction manual. If used otherwise, this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature, relative humidity,…) are within the ranges stated in the technical specifications. Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
The case should only be opened by qualified PCE Instruments personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage is visible, do not use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specifications must not be exceeded under any circumstances.
Non-observance of the safety notes can cause damage to the device and injuries to the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of business.
If you have any questions please contact PCE Instruments. The contact details can be found at the end of this manual.

Specifications

Technical specifications

Display	LCD
Measurement range humidity	0 … 100 %
Measurement range temperature	-30 … +100 °C
Resolution humidity	0 … 20 %: ±4 % RH

20 … 40 %: ±3 % RH

40 … 60 %: ±2 % RH

60 … 80 %: ±3 % RH

80 … 100 %: ±4 % RH

Resolution temperature| -30.0 … -19.9 °C: ±1.0 °C

-20.0 … +60.0 °C: ±0.5 °C

60.1 … 100.0 °C: ± 1.0 °C

Delivery contents

1 x PCE-HVAC 3 thermo-hygrometer
1 x 9 V battery
1 x carrying case
1 x user manual

System description

Device

Sensor
LCD
Backlight button
Button for °C / °F / wet bulb temperature/dew point temperature
MIN / MAX button
Power button
MODE button (absolute moisture / relative humidity)
HOLD button

Note: The battery compartment cover is on the back of the device.

Display

Relative humidity (%)
Measurement in g/m³ (absolute moisture)
Measurement in g/f³ (absolute moisture)
Humidity/moisture reading
Measurement in °C
Measurement in °F
Dew point temperature
Wet bulb temperature
Hold function activated
Min function activated
Max function activated
Low battery icon
Auto Power Off activated
Temperature/dew point temperature / wet bulb temperature reading
Absolute moisture

Getting started

Power supply

The battery compartment cover is located on the back of the device. If the battery voltage is too low to ensure reliable measurement values, this will be indicated on the display by the low battery icon. The battery then needs to be replaced. To do so, the screw on the battery compartment cover must be loosened. The cover can then be opened and the battery can be replaced. Mind correct polarity when inserting the battery. After replacing battery, re- attach the cover and fasten the screw again.

Operation

Measurement

Switch on the instrument

Press the power button to switch on the PCE-HVAC 3.

Perform measurements

Place the thermo-hygrometer’s sensor in the area where the measurements are to be made.
Wait until the measurement value has stabilized.
Press the MODE button several times to choose between RH%, g/m³ or g/ft³.
The function key for °C and °F changes the temperature unit.

Measurement of absolute moisture

Use the MODE key to choose the absolute moisture function (g/m³ or gr/ft³) as described. “abs” will appear on the left side of the display.
The displayed measurement value shows the absolute moisture.

Measurement of the dew point temperature

In order to measure the dew point temperature, you must press the °C / °F button until the display indicates “DP” in the bottom right corner.
The displayed measurement value shows the dew point temperature.

Measurement of the wet bulb temperature

Press the °C / °F button until “WB” is shown in bottom right corner of the display.
The displayed measurement value shows the wet bulb temperature.

Measurement of the temperature

If temperature measurements need to be made, you have to press the °C / °F button until °C or°F is displayed in the bottom right corner of the display.
The displayed measurement value shows the temperature in the chosen temperature unit.

Further functions

Data-HOLD

Press and quickly release the HOLD button to freeze the displayed measurement value. In the bottom right corner, “HOLD” will be shown. To deactivate the function and get back to normal measurement mode, you simply need to press the button once again.

Measurement of minimum and maximum values

This mode allows you to only show the highest or lowest value on the display. The measurement value that is permanently shown in the display will not be changed until a lower / higher value is measured in the background.
If the MIN / MAX button is pressed once and the display shows “MIN”, the instrument will start the minimum value measurement.
By pressing the MIN / MAX button once again, the instrument will only show the highest measurement value and display “MAX”.
If you press the MIN / MAX button again, the instrument will return to normal measurement mode. “MIN” or “MAX” is no longer shown in the display.

Backlight

The instrument has a display which can be backlit. To activate or deactivate this, press the backlight button.

Auto Power Off

The thermo-hygrometer has an Auto Power Off function. This function is activated by default and turns the instrument off when it has not been used for 10 minutes. An icon in the display shows that the function is activated. This function helps to save battery power but it can also be deactivated. It can be deactivated by pressing the HOLD button while starting the instrument. When the PCE-HVAC 3 is turned off and on again, the function will automatically be re-activated.

Maintenance

Storage

The thermo-hygrometer should be stored in a dry place with mild environmental conditions. The environmental conditions include temperature and humidity. The specific environmental conditions can be found in the technical specification of this manual.

Contact

If you have any questions, suggestions or technical problems, please do not hesitate to contact us. You will find the relevant contact information at the end of this user manual.

Disposal

For the disposal of batteries, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company that disposes of the devices in line with law.
If you have any questions, please contact PCE Instruments.

PCE Instruments’ contact information

Germany

PCE Deutschland GmbH Im Langel 4
D-59872 Meschede Deutschland
Tel.: +49 (0) 2903 976 99 0 Fax: +49 (0) 2903 976 99 29 info@pce-instruments.com
www.pce-instruments.com/deutsch

United States of America PCE Americas Inc.

711 Commerce Way Suite 8 Jupiter / Palm Beach
33458 FL
USA
Tel: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us

United Kingdom PCE Instruments UK Ltd

Units 12/13 Southpoint Business Park
ensign Way, Southampton Hampshire
United Kingdom, SO31 4RF
Tel: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9 info@industrial-needs.com www.pce-instruments.com/english

Documents / Resources

| PCE Instruments PCE-HVAC 3 Environmental Meter [pdf] User Manual
PCE-HVAC 3 Environmental Meter, PCE-HVAC 3, Environmental Meter, Meter
---|---
| PCE Instruments PCE-HVAC 3 Environmental Meter [pdf] User Manual
PCE-HVAC 3S, PCE-HVAC 3, PCE-HVAC 3 Environmental Meter, Environmental Meter, Meter