PORTA PHONE ULP16-RS Single Speaker User Guide

PORTA PHONE ULP16-RS Single Speaker

Product Information

Specifications:

• Model No.: ULP16-RS (Single speaker)
• Headset pairing: Automatic
• LED indicator: Green
• Volume control: Up and down buttons
• Conference mode: Separation of 15 headsets into 2 groups or all in the conference
• Mic mute: The microphone automatically stops when the boom swivels up
• FCC Compliance: Part 15 of the FCC Rules

Product Usage Instructions

Headset Pairing:
The main headset and remote headset will start searching for each other after powering ON. The GREEN LED will flash once every 3 seconds. The headsets will automatically link together when the pairing ID is confirmed by the main headset, and the LED turns ON in GREEN color.

Volume Control:
To adjust the headset speaker sound volume, press the volume up button to increase the volume and the volume down button to decrease the volume.

Conference Mode:
To separate the headsets into 2 groups or bring all headsets into conference mode, press the switch located on the lower side of the ear cup. This feature requires the remote headset to be registered in 2 groups.

Mic Mute:
The headset microphone automatically stops when the Mic boom swivels up. To mute the microphone, simply swivel the boom up.

Frequently Asked Questions (FAQ)

• Q: What is the FCC warning about?
  A: The FCC warning states that the device complies with part 15 of the FCC Rules, which means it meets the requirements for preventing harmful interference. The device must also accept any interference received, including interference that may cause undesired operation.

• Q: How can I prevent hearing damage?
  A: To prevent possible hearing damage, it is recommended not to listen at high volume levels for long periods. It is important to take breaks and give your ears rest when using the headset.

Power ON/OFF

• Power ON: Press and hold the power button till to GREEN LED blinks or lights up.
• Power OFF: Press and hold the power button till to the RED LED flashes.

Pairing (Register mode)

• Press and hold the power button to turn the headset power ON, the power LED should blink in Green color.
• Enter the pairing mode: Press the volume down button 3 times continually, then press and hold the volume up till to the RED and Green LED blink alternately.
• The main headset enters the pairing mode first then also the Remote to pairing mode.
• The Green LED of the Remote headset will blink quickly and then turn off after paired, press the power button to quit the pairing mode and keep the Main headset on the pairing mode then can pair with more Remotes or press the power button to the pairing mode.
• Repeat the above step “d” for more Remote headsets paired with the same Main headset, or press the power button to finish the pairing(register).
• The Main headset can accept a maximum of 15 remotes registered in full duplex, the power LED will flash in an ORANGE color when the register remote reaches 15., press the power button to quit the pairing mode)

Talking and listening

• The main headset and remote headset will start to search each other after powering ON, the GREEN LED flashes 1 time every 3 seconds. The headset will be linked together automatically when the pairing ID is confirmed by the main headset and the LED turns ON in GREEN color.
• Press the volume up and down button to adjust the headset speaker sound volume.

CONFERENCE on MAIN

Press the switch located lower side of the ear cup to make 15 headsets to separate 2 groups or all in CONFERENCE if the remote headset has registered in 2 groups.

Mic Muted

The headset Microphone stopped automatically when the Mic boom swiveled up.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The device has been tested and complies with FCC/ISEDC SAR limits. To prevent possible hearing damage, do not listen at high volume levels for long periods.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>