saunalife G6 Outdoor Sauna Room Instruction Manual
- May 15, 2024
- saunalife
Table of Contents
Model G6 Outdoor Sauna Room
Installation Manual
Note: Please read manual before installation
INSTALLATION REQUIREMENTS
The base or foundation for Sauna must be leveled and stable. Sauna must be at least 3 inches higher from the surrounding ground. All base beams must have a support under them.
Recommendation:
We recommend placing Sauna on concrete blocks or strips that have a compressed
gravel underneath. Using geotextile under the Sauna prevents the growth of
grass and weed.
It is also possible to place the Sauna on terrace or pavement, but the Sauna
should still be higher than the surface.
TRANSPORT
Sauna can be lifted from above:
Sauna can be lifted from below:
FINAL ASSEMBLY
Final assembly shall be organized by the client.
Final assembly includes installing of the:
- Decorative base boards
- Heater (+ control unit)
- Rainwater system
- Main Electrical Cables
Sauna door must be adjusted after the final installation.
3.1 Final Assembly Instructions
3.1.1 Base boards are for decorative purposes and easy to install. Rainwater
system must be installed when sauna is exposed to rainwater.
MAINTENANCE
Maintenance of the outdoor cladding should be done once a year.
If sauna is used twice a week, then interior cladding, sauna bench and floor
grid should be oiled once a year.
IMPORTANT SAFETY REQUIREMENTS
Sauna door must be closed during heating to avoid over-heating!
Technical Support
224-253-5909
© 2023 Bathing Brands, Inc.
REV: 1.1-08/2023