saunalife E7 Ergo-Series Barrel Sauna Installation Guide

saunalife E7 Ergo-Series Barrel Sauna

Ergo-Series E7 Barrel Sauna 71D x 81H

Note : Please read manual before construction Rev 4/2023

Product Details

• Dimensions: 71 inches in diameter, 81 inches in height
• Tools Needed: Measuring tape, marker pen, circular saw, water level, hammer, ratchet strap, extra hands, silicone gun (only for glass-wall models), drill, crescent wrench, utility knife, rubber mallet
• Includes various brackets, screws, and Torx bits (T10, T15, T20, T25)

Product Usage Instructions

Wooden Front Wall Installation

1. Fix the front wall diagonally to make it more rigid during installation.
2. Pre-drill holes (5/32) before screwing.
3. Position the brackets inside.
4. Fix the wall temporarily to support walls.
5. Be sure to leave a 1/4 gap when tightening screws to leave room for adjustment when the outer bands (B) are installed.

Wooden Back Wall Installation

1. Pre-drill holes (5/32) before screwing.
2. Position the brackets inside.
3. Fix temporarily to support walls.
4. Leave a 1/4 gap when tightening screws to leave room for adjustment when the outer bands (B) are installed.

Installation of Outer Bands (B)

1. Place the bands around the barrel on the outer side of the cradle.
2. Remove all temporary braces.

Installation of Benches

1. Use level for installation of benches.
2. Under the benches, pre-drill holes (1/8) and fix the brackets temporarily to support walls.

Note: If your sauna is equipped with a front-glass wall, please see the front- glass wall installation manual for proper benches installation.

Note: Please read manual before construction

Front & Back Walls

Details list

Tools needed

INSTALLATION

Wooden front wall installation

Wooden back wall installation

E7 Barrel Sauna 71D” x 81H”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>