Saunalife E6W Barrel Sauna Half Glass Window Instruction Manual
- October 30, 2023
- saunalife
Table of Contents
Saunalife E6W Barrel Sauna Half Glass Window
Product Information
The Ergo-Series E6W Barrel Sauna Half Glass Window is a sauna unit that measures 59 inches in diameter and 81 inches in height. The product comes with a detailed list of parts and tools required for installation. The sauna unit requires a circular saw, water level, hammer, ratchet strap, extra hands, silicone gun (for glass-wall models), drill, crescent wrench, utility knife, and rubber mallet. The product also comes with Torx bits (T10, T15, T20, T25) and a PH2 bit. The sauna unit features wooden front wall installation and half-moon wall installation options. The product has brackets inside and vents for proper ventilation.
Product Usage Instructions
- Read the manual before starting the construction process.
- Assemble the wooden front wall or half-moon wall according to the instructions provided in the manual.
- Join two boards together that will bridge the width of the A gap. It is recommended that the combined boards are approximately 1/4 wider than the gap. If needed, trim the flat edge of the board to create the desired width.
- Fasten the two halves using screws.
- Use straps to support boards during installation.
- Apply waterproof silicone into the groove and pre-drill screw holes. Do not let screws touch the glass while installing a half-moon wall.
- Place the bands around the barrel on the outer side of the cradle and remove the straps.
- Follow the main installation manual for installing the sauna walls and brackets inside.
- Leave a 1/4 gap when tightening screws to leave room for adjustment when the outer bands (B) are installed.
- Remove all temporary braces once the installation is complete.
Front & Back Walls
PARTS
Tools needed
Wooden front wall installation
Half-moon wall installation
Demission
INSTALLATION INSTRUCTION
Note: Please read manual before construction
Read User Manual Online (PDF format)
Loading......