saunalife G6 Garden Series Pre Assembled Outdoor Home Sauna Installation Guide
- October 30, 2023
- saunalife
Table of Contents
sauna life G6 Garden Series Pre-Assembled Outdoor Home Sauna
Installation Guide
Thank you for purchasing a SaunaLife outdoor sauna!
Installation Requirements
- The base or foundation for the Sauna must be leveled and stable.
- The sauna must be at least 3 inches higher from the surrounding ground.
- All base beams must have support under them.
Recommendation: We recommend placing the Sauna on concrete blocks or strips that have compressed gravel underneath. Using geotextile under the Sauna prevents the growth of grass and weed. It is also possible to place the Sauna on a terrace or pavement, but the Sauna should still be higher than the surface.
Transport
Sauna can be lifted from above or below.
Final Assembly
Final assembly shall be organized by the client. Final assembly includes installing of the:
- Parapet metals must be installed to avoid weather damage of the sauna.
- Base boards are for decorative purposes and easy to install. Rainwater system must be installed when sauna is exposed to rainwater.
Maintenance
Maintenance of the outdoor cladding should be done once a year.
If sauna is used twice a week, then interior cladding, sauna bench and floor
grid should be oiled once a year.
Important Safety Requirements
Sauna door must be closed during heating to avoid over-heating!
For more information, please visit saunalife.com or contact us at info@saunalife.comRev 4/2023
Product Usage Instructions
- Ensure that the base or foundation for the sauna is level, stable, and at least 3 inches higher than the surrounding ground. All base beams must have a support under them.
- Transport the sauna by lifting it from above or below.
- Organize the final assembly, including installing the parapet metals and base boards for decorative purposes. Install a rainwater system if the sauna is exposed to rainwater.
- Maintain the outdoor cladding once a year and oil the interior cladding, sauna bench, and floor grid once a year if the sauna is used twice a week.
- For safety, ensure that the sauna door is closed during heating to avoid over-heating.
Thank you for purchasing a SaunaLife outdoor sauna!
INSTALLATION REQUIREMENTS
The base or foundation for Sauna must be leveled and stable. Sauna must be at least 3 inches higher from the surrounding ground. All base beams must have a support under them.
Recommendation:
We recommend placing Sauna on concrete blocks or strips that have a compressed
gravel underneath. Using geotextile under the Sauna prevents the growth of
grass and weed.
It is also possible to place the Sauna on terrace or pavement, but the Sauna
should still be higher than the surface.
TRANSPORT
Sauna can be lifted from above
Sauna can be lifted from below:
FINAL ASSEMBLY
- Final assembly shall be organized by the client.
- Final assembly includes installing of the:
- Parapet metal
- Decorative base boards
- Outdoor lights 120V
- Heater (+ control unit)
- Rainwater system
- Cables
- Electrical cabinet for Lighting
Final Assembly Instructions
Parapet metals must be installed to avoid weather damage of the sauna :
Base boards are for decorative purposes and easy to install. Rainwater system must be installed when sauna is exposed to rainwater.
MAINTENANCE
- Maintenance of the outdoor cladding should be done once a year.
- If sauna is used twice a week, then interior cladding, sauna bench and floor grid should be oiled once a year.
IMPORTANT SAFETY REQUIREMENTS
Sauna door must be closed during heating to avoid overheating!
Documents / Resources
|
saunalife G6 Garden Series Pre Assembled Outdoor Home
Sauna
[pdf] Installation Guide
G6, G6 Garden Series Pre Assembled Outdoor Home Sauna, Garden Series Pre
Assembled Outdoor Home Sauna, Pre Assembled Outdoor Home Sauna, Outdoor Home
Sauna, Home Sauna, Sauna
---|---