SUB-ZERO 600-3 Series Built In Authorized Service Refrigerator Instruction Manual

SUB-ZERO 600-3 Series Built In Authorized Service Refrigerator Instruction

Manual

INTRODUCTION

This Technical Service Manual has been compiled to provide the most recent service information for 600-3 Series units. This information will enable the service technician to troubleshoot and diagnose malfunctions, perform necessary repairs, and return a unit to proper operational condition.

The service technician should read the complete instructions contained in this manual before initiating any repairs on a 600-3 Series unit.

IMPORTANT SAFETY INFORMATION

Below are Product Safety Labels used in this manual. The “Signal Words” used are WARNING or CAUTION.

When reviewing this manual, please note these different Product Safety Labels placed at the beginning of certain sections of this manual. You must follow the instructions given in the boxes of the Product Safety Labels in order to avoid personal injury and/or product damage.

The sample Product Safety Labels below illustrate the precautions that should be taken when the signal word is observed.

WARNING INDICATES THAT HAZARDOUS OR UNSAFE PRACTICES COULD RESULT IN SEVERE PERSONAL INJURY OR DEATH.

CAUTION: Indicates that hazardous or unsafe practices could result in minor personal injury, and/or product damage, and/or property damage.

In addition, please pay attention to the signal word “NOTE”, which highlights information that is especially important for the topic being covered.

TECHNICAL ASSISTANCE

If you should have any questions regarding the 600-3 Series and/or this manual, please contact:

Sub-Zero Freezer Company, Inc.
ATTN: Service Department
P.O. Box 44988
Madison, WI 53744 – 4988

Customer Service & Parts / Warranty Claims
Phone #: (800) 222 – 7820
Technical Assistance
Phone #: (800) 919 – 8324

Customer Service & Technical Assistance
Facsimile #: (608) 441 – 5887
Parts / Warranty Claims
Facsimile #: (608) 441 – 5886

Service Department E-Mail Address:
customerservice@subzero.com
Office Hours:
7:00 AM to 7:00 PM Central Time
Monday through Friday

This manual is designed to be used by Authorized Service Personnel only. Sub- Zero Freezer Co., Inc. assumes no responsibility for any repairs made on Sub- Zero refrigeration units by anyone other than Authorized Service Technicians.

Information and images contained in this manual are the copyright property of Sub-Zero Freezer Company, Inc. Neither this manual nor any information or images contained herein may be copied or used in whole or in part without the express written consent of Sub-Zero Freezer Company, Inc.
© Sub-Zero Freezer Company, Inc, all rights reserved.

WARRANTY INFORMATION

This page summarizes the 2, 5 & 12 Year Warranty provided with every Sub-Zero appliance, as well as two special warranties:

• Non-Residential Warranty – Applies to units installed in non-residential applications.
• Display/Model Home Warranty – Applies to distributor or dealer display units, and units in model homes, sold three years after date of manufacture.
  Following the warranty summaries are details and notes about the warranties.

TWO, FIVE & TWELVE YEAR Warranty

• 2 year TOTAL PRODUCT, *parts and labor.
  NOTE: Stainless Steel (Classic, carBon & Platinum) doors, panels & product frames are covered by a 60 day parts & labor warranty for cosmetic defects.

• 5 Year SEALED SYSTEM, **parts and labor.

• 6th – 12th year LIMITED SEALED SYSTEM, **parts only.

ONE & FIVE YEAR Non-Residential Warranty
(Example: Office, Yacht, etc.)

• 1 Year TOTAL PRODUCT, *parts and labor.
  NOTE: Stainless Steel (Classic, carBon & Platinum) doors, panels & product frames are covered by a 60 day parts & labor warranty for cosmetic defects.

• 5 Year SEALED SYSTEM, **parts and labor.

ONE & FIVE YEAR Display/Model Home Warranty
(Display units sold three years after date of manufacture)

• 1 Year TOTAL PRODUCT, *parts and labor.
  NOTE: Stainless Steel (Classic, carBon & Platinum) doors, panels & product frames are covered by a 60 day parts & labor warranty for cosmetic defects.

• 5 Year SEALED SYSTEM, **parts and labor.

Warranty Details:

• Includes, but is not limited to the following:
  Electronic Control System Components, Fan & Light Switches, Fan Motors & Blades, Defrost & Drain
  Heaters, Defrost Terminator, Drain Pan, Drain Tubes, Wiring, Light sockets & bulbs, Icemaker, Water Valve, Door hinges, Door closers & Cams, Compressor Electricals, etc. . .

• Stainless Steel (Classic, Platinum & Carbon) doors, panels and product frames are covered by a limited 60 day parts and labor warranty for cosmetic defects.

• Includes the following:
  Compressors, Condenser, Evaporators, Filter-Driers, Heat-exchangers, All Tubing that Carries the Freon.
  NOTE: Condenser Fan Motors, Freon, Solder and compressor electricals are NOT considered sealed system parts.

Warranty Notes:

• All warranties begin at unit’s initial installation date.

• All Warranty and Service information collected by Sub- Zero is arranged and stored under the unit serial number, and the customer’s last name.
  Sub-Zero requests that you have the model and serial number available whenever contacting the factory or parts distributor.

• The serial tag on SIDE-BY-SIDE models is located by the top door hinge in the freezer compartment.

• The serial tag on OVER-AND-UNDER models is located by the top door hinge in the refrigerator compartment.

• The serial tag on ALL-REFRIGERATOR and ALLFREEZER models is located by the top door hinge in the refrigeration compartment.

MODEL DESCRIPTIONS

These pages briefly describes the models covered in this 600-3 Series Technical Service Manual (Models 601R-3, 601RG-3, 601F-3, 611-3, 611G-3, 632-3, 642-3, 650-3, 650G-3, 661-3, 685-3, 695-3) The letter after the backward slash in the alpha-numeric model number indicates the exterior variation (“/F” indicates a Framed look with the door trim visible, “/O” indicates that it is intended for the door panels to Overlay the door trim, “/S” indicates the unit is Classic Stainless Steel finish, ”/B” indicates the unit is carBon Stainless Steel finish, ”/P” indicates the unit is Platinum Stainless Steel finish). The “-3” means this is the third design build for this series.

The following lists contain the model numbers of the 600-3 Series with a brief description of each model. A diagram of the basic model configuration accompanies each list.

NOTE: Functional parts are common to each model configuration, meaning for example, models 601R/F-3, 601R/O- 3 and 601R/S-3 will utilize common functional parts. For this reason, the backward slash and letter after the model numbers will only be used in this manual when necessary.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>