PENTAIR Myers GA-1 115V Alarm Panel Instruction Manual

: June 9, 2024
: Pentair

Table of Contents

[PENTAIR Myers GA-1 115V Alarm Panel
[APPLICATIONS
FEATURES ENCLOSURE
LIGHT
CIRCUIT BREAKER
TERMINAL BLOCKS
INSTALLATION
STANDARD LIMITED WARRANTY
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PENTAIR Myers GA-1 1[15V Alarm Panel

PENTAIR-Myers-GA-1-115V-Alarm-Panel-fig-1

CALIFORNIA PROPOSITION 65 WARNING:
This product and related accessories contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

APPLI[CATIONS

This alarm panel is to be used as a high water alarm. It may be mounted inside or outside. A 5 amp 115 V. circuit breaker is provided for the alarm.

FEATURES ENCLOSURE

The enclosure is a fiberglass NEMA 4X that may be mounted inside or outside. Mounting feet are supplied on the exterior of the box. A hinged door with lockable hasp is supplied. The dimensions of the enclosure are 7 1/2 X 6 3/4 X 4 7/8.

LIGHT

The alarm light is a 30 watt high intensity flashing light enclosed by a heavy red lexan globe. The light bulb is a standard Edison base appliance bulb that my be eaisly removed from inside the enclosure.

CIRCUIT BREAKER

A 5 amp single pole circuit breaker is supplied for the alarm.
The cicuit breaker provides a convenient method of disconnecting the power to the alarm for maintenance or service.

TERMINAL BLOCKS

Box Clamp Terminal Blocks are provided for connecting the alarm switch and neutral power lead. These terminals are clearly marked.

INSTALLATION

Select a convenient location and mount the alarm enclosure on a stable vertical support by means of the four mounting holes in the brackets on the back of the enclosure.
Fasten hot wire to top of the circuit breaker. Fasten neutral wire to neutral terminal block. Fasten ground wire to ground lug.
IMPORTANT: Make sure hot wire (normally black) is connected to circuit breaker and [neutral wire (normally white) is connected to neutral terminal block.
Run wires from high water alarm float and connect to terminals A 1 and A2.
You may test the alarm circuit by manually activating the float switch or by pushing the test switch on the outside of the enclosure.
The enclosure may be locked by inserting a padlock (not supplied) through the enclosure hasp.
NOTE: These instructions are meant as an installation guide only. The installer should be familiar with the N.E.C. code or any other local codes that apply and the installation should be done per governing regulations.

PENTAIR-Myers-GA-1-115V-Alarm-Panel-fig-2

STANDARD LIMITED WARRANTY

Pentair Myers® warrants its products against defects in material and workmanship for a period of 12 months from the date of shipment from Pentair Myers or 18 months from the manufacturing date, whichever occurs first – provided that such products are used in compliance with the requirements of the Pentair Myers catalog and technical manuals for use in pumping raw sewage, municipal wastewater or similar, abrasive-free, noncorrosive liquids.
During the warranty period and subject to the conditions set forth, Pentair Myers, at its discretion, will repair or replace to the original user, the parts that prove defective in materials and workmanship. Pentair Myers reserves the right to change or improve its products or any portions thereof without being obligated to provide such a change or improvement for prior sold and/or shipped units.
Start-up reports and electrical schematics may be required to support warranty claims. Submit at the time of startup through the Pentair Myers website: http://forms.pentairliterature.com/startupform/startupform.asp?type=m.
Warranty is effective only if Pentair Myers authorized control panels are used. All seal fail and heat sensing devices must be hooked up, functional and monitored or this warranty will be void. Pentair Myers will cover only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Myers be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Myers service facility.
This limited warranty will not apply: (a) to defects or malfunctions resulting from failure to properly install, operate or maintain the unit in accordance with the printed instructions provided; (b) to failures resulting from abuse, accident or negligence; (c) to normal maintenance services and parts used in connection with such service; (d) to units that are not installed in accordance with applicable local codes, ordinances and good trade practices; (e) if the unit is moved from its original installation location; (f) if unit is used for purposes other than for what it is designed andmanufactured; (g) to any unit that has been repaired or altered by anyone other than Pentair Myers or an authorized Pentair Myers service provider; (h) to any unit that has been repaired using non factory specified/OEM parts.
Warranty Exclusions: Pentair MYERS MAKES NO EXPRESS OR IMPLIED WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Pentair MYERS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE.
Liability Limitation: IN NO EVENT SHALL Pentair MYERS BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL,
INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO ANY Pentair MYERS PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY RESULT FROM IMPROPER INSTALLATION. Pentair MYERS DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION. Pentair MYERS RECOMMENDS INSTALLATION BY PROFESSIONALS.
Some states do not permit some or all of the above warranty limitations or the exclusion or limitation of incidental or consequential damages and therefore such limitations may not apply to you. No warranties or representations at any time made by any representatives of Pentair Myers shall vary or expand the provision hereof.