SUB-ZERO ICBPRO3650RH 660L Built-In Fridge User Guide
- June 6, 2024
- SUB-ZERO
Table of Contents
PRO Series Refrigeration
Use and Care Guide
Customer Care
The model and serial number are listed on the product rating plate. Refer to
page 4 for rating plate location. For warranty purposes, you will also need
the date of installation and the name of your authorized Sub-Zero dealer.
Record this information below for future reference.
SERVICE INFORMATION
Model Number
Serial Number
Date of Installation
Certified Service Name
Certified Service Number
Authorized Dealer
Dealer Number
If your product ever needs attention, be sure to use a Sub-Zero Factory
Certified Service provider.
Important Note
To ensure this product is installed and operated as safely and efficiently as
possible, take note of the following types of highlighted information
throughout this guide:
IMPORTANT NOTE highlights information that is especially important.
CAUTION indicates a situation where minor injury or product damage may
occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or death if
precautions are not followed.
IMPORTANT SAFEGUARDS
WARNING
Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
WARNING
Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
WARNING
This appliance is only intended for residential use.
WARNING
Do not expose this appliance to rain.
WARNING
This symbol indicates risk of
fire/flammable materials.
CAUTION
Incorporated ice makers must be installed by the manufacturer or its service
agent.
WARNING
Do not damage the refrigerant circuit.
WARNING
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
WARNING
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure they do not play with the appliance.
**WARNING
This appliance contains flammable refrigerant and must be handled,
installed, serviced, and decommissioned by authorized personnel. Once
decommissioned, consult local authorities for disposal instructions.
WARNING
DANGER:** Risk of child entrapment. Before you throw away your old
refrigerator or freezer, take off the doors and leave shelves and drawer
dividers in place so that children may not easily climb inside.
This appliance is intended to be used in household and similar applications
such as:
- staff kitchen areas in shops, offices, and other working environments
- farmhouses and by clients in hotels, motels and other residential type environments
- bed and breakfast type environments
- catering and similar non-retail applications
PRO Series Features
FEATURES
1. Product Rating Plate (inside drawer)
2. Freezer External Touch Display
3. Refrigerator External Touch Display
4. Air Purification System
5. Glass Shelves
6. Slide-Out Bins
7. Pull-Out Shelf
8. Side Rail Supports| 9. Refrigerator Crisper Drawer
10. Removable Crisper Lid
11. Refrigerator Storage Drawer
12. Freezer Storage Drawer
13. Automatic Ice Maker
14. Ice Container
15. Water Filtration System (behind grille)
16. Condenser (behind grille)
---|---
Interactive Controls
Interactive Touch Controls
For initial start-up, touch and hold Power on either external touch display,
located on the grille.
Temperature can be adjusted in one-degree increments.
The left and right external displays control different temperature zones in
the unit, but can both access the settings menu.
EXTERNAL TOUCH DISPLAY
To unlock the display, touch and hold for three seconds.
The display will lock automatically after 30 seconds of inactivity. Refer to
the illustrations below.
To adjust the temperature, touch the temperature displayed next to the
corresponding zone icon.
To turn the ice maker on or off or to active max ice, touch .
SETTINGS
To access the Settings menu, touch on either external touch display.
SETTINGS
| Activate or deactivate power to the unit
---|---
Enable or disable automatic display lock
Activate, deactivate, or refresh purifier life reminder
Enable or disable door/drawer alarm and duration
Enable or disable connect
Enable, disable reminder, or refresh filter life reminder
Enable or disable Sabbath mode
Adjust soft on lighting and accent lighting (if applicable)
Adjust temperature units
Adjust alarm volume and tone
Select language
View troubleshooting and service information
Storage
Keeping Food At Its Best
DUAL REFRIGERATION ®
This Sub-Zero features a unique Dual Refrigeration ® system to keep food
fresher longer. Three separate controls allow the refrigerator, refrigerator
drawer(s), and freezer to be set at different temperatures. With the Sub-Zero
Dual Refrigeration ® system, individual refrigerators and freezer systems have
been designed to maintain accurate, consistent temperatures and proper
humidity levels for longer food life expectancy. Dual Refrigeration®eliminates
transfers of fresh food odors to frozen food and ice and does not freeze the
moisture out of the air in the fresh food section.
For handy tips and information on how to maximize food freshness, refer to the
freshness cards stored in the refrigerator.
Refrigerator Storage
GLASS SHELVES
To remove or adjust a glass shelf, tilt-up, then lift up and out. To
reposition, insert the shelf in the tracks along the back wall, then lower the
front until it locks into position.
Refer to the illustration below.
IMPORTANT NOTE: Use care when handling glass shelves to prevent breakage
or scratching of the interior.
SLIDE-OUT BINS
Integrated rails mounted below the glass shelves allow slide-out bins to be
positioned in a variety of locations. To remove or adjust a slide-out bin,
pull the handle of the bin forward until it stops, and lift up and out of the
rails. Refer to the illustration below.
Storage
Refrigerator Storage
PULL-OUT SHELF
The bottom shelf pulls out for easy access to condiments and other items
commonly stored on door shelves. Adjustable rails keep items snugly in place.
To adjust, pull the rail up and rotate. Refer to the illustration below.
CRISPER LID
To remove the crisper lid assembly, pull the upper refrigerator drawer all the
way out, raise the front edge of the crisper lid up, and pull out from the
back.
Refer to the illustration below.
DRAWER DIVIDERS
Long dividers run the full depth of the drawer, with shorter dividers that
connect to the long dividers to compartmentalize the drawer.
To remove the short dividers, lift up and out. The long dividers cannot be
removed.
Freezer Storage
STAINLESS STEEL SHELVES
For 1219 mm models, to remove or adjust a shelf, tilt-up, then lift up and
out. To install, insert the shelf in the tracks along the back wall, then
lower the front until it locks into position.
ICE CONTAINER
To remove the ice container, pull the drawer out to full extension, then lift
the container up and out.
Storage Drawers
Refrigerator and freezer storage drawers are removable for cleaning. An
automatic stop is built in to prevent the drawers from coming all the way out
unintentionally. To remove, pull the drawer out to full extension. Apply
forward pressure to the front of the drawer slide, and pull up and back on the
drawer handle. Refer to the illustration below.
Operation
Air Purification System
Many fresh foods emit ethylene gas, a naturally-occurring compound that
hastens food ripening and spoilage. The air purification cartridge has been
factory-installed and is located inside the refrigerator on the back wall. To
initiate air purification, touch , then touch .
The cartridge will last approximately one year. “Change Air Purifier” will
appear on the display when the cartridge needs to be replaced. Touch Snooze”
to delay the reminder for 24 hours or until the cartridge can be replaced.
Touch “Refresh” to reset the life indicator to 100% once the cartridge is
replaced.
AIR PURIFICATION CARTRIDGE REPLACEMENT
- To access the air purification cartridge, grasp the outside cover from the bottom and rotate upward. Refer to the illustration below.
- Grasp the black cover from the top and rotate downward. The cartridge will pop out and can be removed.
- Remove the new cartridge from the packaging and insert it with the connector pointing downward.
- Once in position, close the black cover. Then rotate the outside cover downward until it closes against the back wall.
- Once the cartridge has been replaced, follow the instructions on the display. The cartridge life cycle will reset for approximately one year.
Ice Maker Operation
To initiate ice production, touch on the freezer external touch display. will
be visible in the display. After initial start-up, discard the first few
batches of ice. The ice may contain impurities from new plumbing connections.
Max ice increases ice production up to 30% for a 24-hour period. Touch to
activate max ice. will be visible in the display.
If ice is not used regularly, it may fuse together. To avoid, discard the ice
and allow the ice maker to replenish.
Sabbath
This appliance is certified by Star-K to meet strict religious regulations in
conjunction with specific instructions found on
www.star-k.org.
Care Recommendations
Cleaning
STAINLESS STEEL EXTERIOR
Use a non-abrasive stainless steel cleaner and apply with a soft lint-free
cloth. To bring out the natural luster, lightly wipe the surface with a water-
dampened microfiber cloth followed by a dry polishing chamois. Always follow
the grain of stainless steel.
INTERIOR CLEANING
To clean interior surfaces and all removable parts, wash with a mild solution
of soap, water, and baking soda. Rinse and dry thoroughly. Avoid getting water
on the lights.
CAUTION
Do not use vinegar, rubbing alcohol, or other alcohol-based cleaners on any
interior surface.
VACATIONS
For extended vacations, turn the unit off. Empty the unit and block doors open
to let fresh air in and keep the interior dry. The water filter should be
replaced before start-up.
CONDENSER CLEANING
CAUTION
Before cleaning the condenser, turn the power off to the unit. Wear gloves to
avoid injury from sharp condenser fins.
The condenser is located behind the grille. To access, rotate the bottom of
the grille upward. Use a soft bristle brush and vacuum to remove dust and lint
from the condenser. Clean the condenser every 6–12 months.
Refer to the illustration below. IMPORTANT NOTE: To avoid damaging the
condenser fins, vacuum in the direction of the fins.
CAUTION
Failure to clean the condenser could result in temperature loss, mechanical
failure, or damage.
Troubleshooting
UNIT OPERATION
No lights or cooling.
- Verify power is on.
- Verify electrical power to the unit and home circuit breaker is on.
No lights in the refrigerator or freezer.
- The door/drawer may have been left ajar, which has disabled lights to eliminate excess heat. If the lights are out, close the door/drawer for one hour. If the lights are still out, contact Sub-Zero Factory Certified Service.
- LED interior lighting must be replaced by Sub-Zero Factory Certified Service.
Frost, condensation, or ice buildup inside the unit.
- Verify the condenser is clean.
- Verify the door/drawer is closing properly.
- Verify the door/drawer has not been left ajar.
- Verify the door/drawer gasket does not have rips or tears. If it does, contact Sub-Zero Factory Certified Service.
- If icing is heavy, turn the unit off and use a handheld steamer to melt the ice. Do not use a hairdryer. Once the ice has melted, wipe up any water with a cloth or paper towel.
High temperatures, the unit runs excessively or the unit is giving off too much heat.
- Verify the condenser is clean.
- Verify the door/drawer is closing properly.
- Verify the door/drawer has not been left ajar.
- Increased ambient temperatures may cause the compressors to run longer.
- If the temperature display shows 3° and -18°, but is not cooling, the unit may be in showroom mode. Contact Sub-Zero Factory Certified Service.
ODOR
- The unit should be cleaned before using for the first time. This will clear any odors that may have been trapped during shipping.
- Replace the air purification cartridge.
- Clean the unit and shelving thoroughly.
- Uncovered food could create an odor, which may require cleaning.
- Remove and clean the drain pan located behind the kickplate, and reinstall.
ICE PRODUCTION
No ice.
- Verify or appears in the freezer external display
- Verify the ice maker has been on for at least 24 hours.
- Verify the freezer temperature is near -18°C.
- Verify the ice container is properly installed.
- Verify the ice maker arm in the down position.
- Verify water is being supplied to the unit.
Blue or green ice.
- Possible copper supply line corrosion. Contact a plumber to clean or replace.
Black flecks in the cubes.
- Stop use and contact Sub-Zero Factory Certified Service.
Bad taste.
- Defrost the freezer and clean with soap and water.
- Place coffee grounds or charcoal briquettes in the freezer to absorb odor.
Hollow cubes.
- Clean the condenser. Contact Sub-Zero Factory Certified Service if unresolved.
SERVICE
- Maintain the quality built into your product by contacting Sub-Zero Factory Certified Service.
- When contacting the service, you will need the model and the serial number of your unit. Both numbers are listed on the product rating plate. Refer to page 4 for rating plate location.
- For warranty purposes, you will also need the date of installation and the name of your authorized Sub-Zero dealer. This information should be recorded on page 2 of this guide.
Warranty
Sub-Zero International Limited Warranty
FOR RESIDENTIAL USE
**FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Sub-Zero product
warranty covers all parts and labor to repair or replace, under normal
residential use, any part of the product that proves to be defective in
materials or workmanship. All service provided by Sub-Zero under the above
warranty must be performed by Sub-Zero factory certified service, unless
otherwise specified by Sub-Zero, Inc. Service will be provided during normal
business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY*
For five years from the date of original installation, this Sub-Zero product
warranty covers all parts and labor to repair or replace, under normal
residential use, these parts that prove to be defective in materials or
workmanship: compressor, condenser, evaporator, drier and all connecting
tubing. All service provided by Sub-Zero under the above warranty must be
performed by Sub-Zerofactory certified service unless otherwise specified by
Sub-Zero, Inc. Service will be provided during normal business hours.
For more information regarding your Sub-Zero product warranty, contact your
authorized Sub-Zero dealer. Warranties must comply to all country, state,
city, local, and or ordinances.
Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by limited 60-day parts and labor warranty for cosmetic defects.
*Replacement water filters and air purification cartridges are not covered by the product warranty.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration,
The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design,
Wolf, Wolf & Design, Wolf Gourmet, W & Design, red-colored knobs, Cove, and
Cove & Design have registered trademarks and service marks of Sub-Zero Group,
Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United
States and other countries.
References
- Sub-Zero Classic, Designer and Pro Series Refrigerators
- Kosher Certificates | Kosher Certification | STAR-K
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>