BLACK DECKER REVHV8J40 Cordless Hand Vacuum Installation Guide

: June 10, 2024
: Black Decker

Table of Contents

BLACK DECKER REVHV8J40 Cordless Hand Vacuum
Product Information
Usage Instructions
Components
Intended Use
Additional Safety Information
MAINTENANCE
Cleaning the Filter
Accessories
TWO‑YEAR LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACK DECKER REVHV8J40 Cordless Hand Vacuum

BLACK-DECKER-REVHV8J40-Cordless-Hand-Vacuum-PRODUCT

Product Information

The BLACK+DECKER vacuum is a household appliance designed for vacuuming everyday dry messes. The vacuum comes equipped with an ON/OFF switch, a main handle, a main housing, a dust bowl, a nozzle, a flip-up brush, a filter assembly, a pre-filter, a filter, a charge indicator LED, a charger, a jack plug, and a jack plug charge port. The vacuum is intended for household use only and should not be modified or repaired by the user.

Usage Instructions

Read all safety warnings and instructions before using the appliance.
Ensure the switch is in the off position before picking up or carrying the appliance.
Use only the charger specified by the manufacturer to recharge the appliance.
Clean or replace the filters regularly to prevent debris from being discharged from the air vents.
Avoid vacuuming household dust that contains chemicals known to cause cancer, birth defects, or other reproductive harm.
If the liquid inside the appliance leaks, wash the affected area with soap and water or neutralize it with a mild acid such as lemon juice or vinegar. Seek medical attention if necessary.
Save these instructions for future reference.

Following these instructions will help ensure the safe and effective use of the BLACK+DECKER vacuum. Remember to always use caution when operating electrical appliances to prevent electric shock, fire, and/or serious injury.

Please read before returning this product for any reason.

Components

BLACK-DECKER-REVHV8J40-Cordless-Hand-Vacuum-FIG-1

ON/OFF switch
Main handle
Main housing
Dustbowl
Nozzle
Flip up the brush
Filter assembly
Pre-filter
Filter
Charge indicator LED
Charger
Jack plug
Jack plug charge port

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/ or serious injury.

WARNING
To reduce the risk of injury, read the instruction manual.

Intended Use

Your BLACK+DECKER vacuum has been designed for vacuuming everyday dry messes. This appliance is intended for household use only.

Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.

WARNING
Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION
Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. (Used without a word) Indicates a safety-related message.

NOTICE
Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire, and/or serious injury.

WARNING: Some household dust contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm such as asbestos and lead in lead-based paint.

WARNING
Do not attempt to modify or repair the appliance.

WARNING
Do not charge the battery at ambient temperatures below 39 °F (4 °C) or above 104 °F (40 °C). Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

WARNING
To reduce the risk of fire, electrical shock, or injury:

Shock Hazard. To protect against the risk of electrical shock, do not put the charging base in water or other liquid.
Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
Use only as described in this manual. Use only the manufacturer’s recommended attachments.
If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
Do not handle chargers, including charger plugs, and charger terminals with wet hands.
Do not put any objects into openings. Do not use any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Do not use without a dust bag and/or filters in place.
Do not charge the unit outdoors.
Use only the charger supplied by the manufacturer to recharge.
Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire.
This appliance is intended for household use only and not for commercial or industrial use. The unit should be placed or mounted away from sinks and hot surfaces.
Plug the charger directly into an electrical outlet.
Use the charger only in a standard electrical outlet (120V/60Hz).
Unplug the charger from the outlet before any routine cleaning or maintenance.
Do not look into the air vents when the unit is switched on, as sometimes there is a possibility of small debris being discharged from the air vents, especially after cleaning / replacement of the filters as debris inside the unit can be disturbed.
Leaks from battery cells can occur under extreme conditions. If the liquid, which is a 20‑35% solution of potassium hydroxide, gets on the skin (1) wash quickly with soap and water or (2) neutralize with a mild acid such as lemon juice or vinegar. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention.

SAVE THESE INSTRUCTIONS
Additional Safety Warnings

Prevent unintentional starting. Ensure the switch is in the off‑position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing an appliance that has the switch on invites accidents.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting
in fire, explosion or risk of injury.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266 °F (130 °C) may cause an explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure the safety of the product is maintained

Additional Safety Information

WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
WARNING : Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Some examples of these chemicals are:

lead from lead‑based paints, crystalline silica from bricks and cement, and other masonry products, and
arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles
Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, and eyes, or lay on the skin may promote the absorption of harmful chemicals. Direct particles away from the face and body.
Air vents often cover moving parts and should be avoided. Loose clothes, jewelry, or long hair can be caught in moving parts.

The label on your tool may include the following symbols. The symbols and their definitions are as follows:

BATTERY AND CHARGER
The battery is not fully charged out of the carton. Before using the charger to charge the battery, read the safety instructions below and then follow the charging procedures outlined.Only for use with S010QU1400040 chargers.

READ ALL INSTRUCTIONS
Important Safety Instructions for All Integral Battery Tools
WARNING: Read all safety warnings, instructions, and cautionary markings for the battery, charger and product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

NEVER force a charger plug into the tool.
DO NOT modify the charger plug of a non‑compatible charger in any way to fit into the tool as the battery may rupture causing serious personal injury.
DO NOT charge or use the battery in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Inserting or removing the charger plug from the tool may ignite dust or fumes.
Only charge the battery with the provided charger.
DO NOT splash or immerse in water or other liquids.
DO NOT allow water or any liquid to enter the tool.
DO NOT store or use the tool in locations where the temperature may reach or exceed 104 °F (40 °C) (such as outside sheds or metal buildings in summer). For best life store tools in a cool, dry location.
NOTE: Do not store the tool with the switch locked on.
Never tape the switch in the ON position.
DO NOT incinerate the tool even if it is severely
damaged or is completely worn out. The battery can explode in a fire. Toxic fumes and materials are created when lithium‑ion batteries are burned.
If battery contents come into contact with the skin, immediately wash the area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention.
Battery liquid may be flammable if exposed to a spark or flame.
Never attempt to open the tool for any reason. If the tool case is cracked or damaged, do not charge it. Do not crush, drop or damage the tool. Do not use a tool or charger that has received a sharp blow, been dropped, run over, or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on). Damaged tools should be returned to the service center for recycling.

Storage Recommendations
The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold. Store the fully charged tool disconnected from the charger. Transportation
NOTE: Integral Li‑ion tools should not be put in checked baggage on airplanes.

Tool Disposal
This product uses a lithium‑ion rechargeable and recyclable battery. When the battery no longer holds a charge, the tool should be recycled. The tool should not be incinerated or placed in the trash. The tool can be taken for disposal to an Authorized Service Center. Some local retailers are also participating in a national recycling program (refer to RBRC®). Call your local retailer for details. If you bring the tool to an Authorized Service Center, the Center will arrange to recycle the tool and its battery. Or, contact your local municipality for proper disposal instructions in your city/town.

The RBRC® Seal
Please take your BLACK+DECKER with a spent battery to an authorized BLACK+DECKER service center or to your local retailer for recycling. In some
areas, it is illegal to place spent battery packs in the trash. You may also contact your local recycling center for information on where to drop off the spent battery pack. Do not place in curbside recycling. For more information visit www.call2recycle.org. or call the toll- free number in the RBRC® Seal.
RBRC® is a registered trademark of Call 2 Recycle, Inc.

Charging the Battery (Fig. A, B)
WARNING: For use only with the supplied charger.
WARNING: Do not charge the battery at ambient temperatures below 39 °F (4 °C) or above 104 °F (40 °C). From the new, the rechargeable cells of the product need a minimum charge time of 3 to 5 hours to ensure full power.

The switch must be in the OFF position, the tool will not charge if it is in any other position.
Fig. B – Plug the jack plug 12 of the charger into the charging socket 13 of the tool.
Plug the charger 11 into any standard 120 Volt 60 Hz electrical outlet.
The charge indicator LED 10 on the center of the main housing 3 will illuminate while charging.
The charge indicator LED 10 will turn off upon completion of charging.
NOTE: While charging, the charger may get warm, this is perfectly normal and safe. It is safe to leave the appliance connected to the charger indefinitely. The charger automatically reduces power consumption when charging is complete.

ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn the unit off and lock off the tool before making any adjustments or removing/installing attachments or accessories. An accidental start‑up can cause injury

Installing Dust Bowl (Fig. F)
NOTE: It is very important that the filter is correctly positioned before use.

Place filter assembly 7 into position inside the dust bowl.
Install the dust bowl 4 onto the main housing 3, ensuring the housing tab 14 aligns with the main dust bowl slot 15 as shown in Fig. F, and rotate the dust bowl counterclockwise to lock it firmly into position.

OPERATION (FIG. A)
WARNING: To Reduce The Risk Of
Electric Shock – Use indoors only. WARNING: To reduce the risk of serious personal injury, turn the unit OFF before making any adjustments or removing/installing attachments or accessories. An accidental start‑up can cause injury.

WARNING: Projectile/Respiratory Hazard: Never use the vac without its filter.

Switching ON and OFF (Fig. D)

To turn the vac on, slide the ON/OFF switch 1 forward to the “I” position.
To turn the vac off, slide the ON/OFF switch 1 back to the “O” position.
Return the product to the charger immediately after use so that it will be ready and fully charged for the next use. Ensure that the product is fully engaged with the charger plug.

Flip Up Brush (Fig. E)
A flip-up brush 6 is built into the nozzle and can be rotated upwards for use.

MAINTENANCE

WARNING : To reduce the risk of serious personal injury, turn the unit off and lock off the tool before making any adjustments or removing/installing attachments or accessories. An accidental start‑up can cause injury. Your BLACK+DECKER power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Cleaning
WARNING : Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear ANSI Z87.1-approved eye protection when performing this procedure.

WARNING: Never use solvents or other harsh chemicals for cleaning the non‑metallic parts of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool in a liquid.

Emptying the Dust Bowl (Fig. F)

BLACK-DECKER-REVHV8J40-Cordless-Hand-Vacuum-FIG-3
WARNING: Never use this cordless hand vacuum without both filters.
IMPORTANT: Maximum dust collection will only be obtained with clean filters and an empty dust bowl. If dust begins to fall back out of the product after it is switched off, this indicates that the dust bowl is full and requires emptying

To Empty the Dust Bowl (Fig. F)

Place the dust bowl over a trash bin and remove dust bowl 4 from the main housing 3 by twisting the dust bowl 4 clockwise and pulling the dust bowl away from the main housing.
Remove filter assembly 7 by pulling it out of the dust bowl 4.
Shake or lightly brush any dust from the filter assembly.
Empty the dust from dust bowl 4 into a trash bin and wash if necessary. Ensure that the dust bowl is completely dry before using.
Place filter assembly 7 into position in the dust bowl.
Install the dust bowl 4 onto the main housing 3, ensuring the main housing tab 14 aligns with the dust bowl slots 15 as shown in Fig. F, and rotate the dust bowl counterclockwise to lock it firmly into position

Cleaning the Filters (Fig. F, G)

Removing Pre‑filter

Place the dust bowl over a trash bin and remove dust bowl 4 from the main housing 3 by twisting the dust bowl 4 counterclockwise and pulling the dust bowl away from the main housing.
Remove filter assembly 7 by pulling it out of the dust bowl.
Twist counterclockwise and pull the pre‑filter 8 to separate it from filter 9.
Remove the pre‑filter and shake or lightly brush any dust from the filter and pre‑filter.
Empty any dust from the dust bowl 4 into a trash bin and wash if necessary. Ensure that the dust bowl is completely dry before using.
Wash the pre‑filter 8 and filter 9 regularly using warm, soapy water. Ensure that both are completely dry for 12 hours before using.
Install the pre‑filter onto the filter, ensuring the filter slots 17 align with the pre‑filter tabs 18, and rotate the pre‑filter clockwise to lock it firmly into position.
Install the filter assembly into the dust bowl

Install the dust bowl 4 onto the main housing 3, ensuring the main housing tab 14 aligns with the dust bowl slots 15 as shown in Fig. F, and rotate the dust
bowl clockwise to lock it firmly into position.

BLACK-DECKER-REVHV8J40-Cordless-Hand-Vacuum-FIG-5

Cleaning the Filter

Once the filter and pre‑filter are removed from the dust bowl shake off or lightly brush any dust from the pre‑filter 8 and filter 9.
Rinse out the dust bowl with warm soapy water.
Wash the filters regularly using warm, soapy water and ensure that it is completely dry before using them again. The cleaner the filter is, the better the product will perform.
It is very important that the filters are completely dry and correctly in position before use.
Ensure the filters are completely dry for 12 hours before refitting.
Follow the instructions in the Removing Prefilter section for assembly instructions.

Replacing the Filters
The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your BLACK+DECKER dealer.
Visit www.blackanddecker.com to locate dealers.

Remove the old filters as described in Emptying the Dust Bowl and Clean the Filters.
Fit the new filters as described in Emptying the Dust Bowl and Clean the Filters.

Accessories

WARNING: Since accessories, other than those offered by BLACK+DECKER, have not been tested with this product, the use of such accessories with this product could be hazardous. To reduce the risk of injury, only BLACK+DECKER- recommended accessories should be used with this product.
Recommended accessories for use with your product are available at extra cost from your local dealer or authorized service center. If you need assistance in
locating any accessory, please contact BLACK+DECKER call 1‑800‑544‑6986.

Repairs
WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance, and adjustment (including brush inspection and replacement, when
applicable) should be performed by a BLACK+DECKER factory service center or a BLACK+DECKER authorized service center. Always use identical replacement parts

Register Online
Thank you for your purchase. Register your product now for:

WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product.
CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood, or theft, your registration of ownership will serve as your proof of purchase.
FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act.
Register online at www.BlackandDecker.com/NewOwner

TWO‑YEAR LIMITED WARRANTY

Black & Decker (U.S.) Inc. warranties this product to be free from defects in material or workmanship for a period of two (2) years following the date of purchase, provided that the product is used in a home environment. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than BLACK+DECKER and its Authorized Service Centers. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways:

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to take or send the product (prepaid) to a BLACK+DECKER-owned or authorized Service Center for repair or replacement at BLACK+DECKER’s option. Proof of purchase may be required. BLACK +DECKER-owned and authorized service centers are listed online at ww.blackanddecker.com. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest BLACK+DECKER Service Center. This product is not intended for commercial use, and accordingly, such commercial use of this product will void this warranty. All other guarantees, express or implied, are hereby disclaimed.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country-specific warranty information contained in the packaging, call the local company, or see the website for such information.