SUB-ZERO SZPA-P12 Portable Speaker User Manual

PORTABLE SPEAKER
SZPA-P12/P15
USER MANUAL

WARNING!

Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product No naked flame sources, such as lighted candles, should be placed on the product Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up.
The ventilation must not be impeded by covering the appliance with items such as newspapers, tablecloths, curtains, etc.
The mains plug is used to disconnect the appliance from the mains supply.
Ensure that the main outlet is easily-accessible and remove the plug from the main outlet if you notice any abnormality with the appliance. If used improperly, batteries may
explode or leak and cause damage or injury. In the interest of safety: Make sure you observe the correct polarity when replacing batteries Avoid using new batteries together with used ones Avoid mixing different types of batteries Remove batteries if the appliance is to remain unused for an extended period of time Never keep batteries together with metallic objects such as ballpoint pens,  necklaces, hairpins, etc.

Used batteries must be disposed of in compliance with whatever regulations for their safe disposal that may be observed in the region in which you live.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

INTRODUCTION

Thank you for purchasing the SZPA-P12 / SZPA-P15.
To get the most out of your product, please read this manual carefully.
BOX CONTENTS

• 1 x SZPA-P12 / SZPA-P15
•  2 x Wireless handheld microphones
• 1 x UK power cable
• 1 x EU power cable
•  1 x User manual

FEATURES

• Powerful battery-operated 12/15” PA system, with media player and 2 mics.
• 12” speaker produces 60W RMS / 100W Peak / 240W Max.
• 15” speaker produces 80W RMS / 140W Peak / 320W Max.
• Digital media player offers Bluetooth, USB, and SD connectivity.
• Built-in rechargeable battery with up to 6 hours of battery life.

CONTROLS & FUNCTIONS

1. DIGITAL MEDIA PLAYER
   Enables you to play music through the speaker using a variety of platforms. For more information please see page 9.

2. MIC GAIN
   Increase and decrease the volume of the microphone inputs (7). Note that this does not control the volume of the wireless microphones.

3. UNE LEVEL
   Increase and decrease the volume of the line input.

4. ECHO
   Increase or decrease the amount of echo to be added to the inputs.

5. MP3 VOLUME
   Increase or decrease the level of the digital media player input.

6. VOLUME
   Increase or decrease the overall volume of the master output of the speaker.

7. MIC INPUTS
   2 x TS % jack inputs suitable for low impedance microphone signals. Note, this input does not support microphones that require phantom power.

8. UNE INPUTS
   Stereo RCA inputs are suitable for high impedance line-level signals.

9. MIX OUTPUT
   Stereo RCA output that provides a master output of the speaker’s mix at a line-level signal.

10. GRAPHIC EQ
    Control the frequencies of the master output at 100Hz,330Hz, 1KHz, 3.5KHz, and 10KHz. Boost or cut the frequency by +/-12dB.

11. WIRELESS MICROPHONE VOLUME
    Control the volume of the wireless Power to the receiver can be switched on and off using the on/off button.

12. BATTERY CHARGE INDICATOR
    Four level indicators to show the battery life. The red light indicator flashes when the charge level is below 25%. At this point, you need to recharge the battery as soon as possible to continue use.

13. &

14. ANTENNAS
    Receive radio frequency signals from the wireless microphones. Be sure these are extended when in use with the wireless microphones.

15. BATTERY FUSE
    This fuse is replaceable. When replacing please ensure that you use an identical fuse as failure to do so could result in damage to the product. Before replacing, make sure the unit is not connected to any external power supply and the main plug is not attached.

16. MAINS CONNECTION
    Use only the power cable supplied with the product. This power socket is fitted with an F1A at 250V fuse. Ensure to replace only with a like for like a fuse. Failure to do this could damage the product. Before replacing, remove the unit from any external power supply and ensure the main plug is not attached.

17. POWER SWITCH
    Turns the speaker on or off.

WIRELESS MICROPHONE

1. GRILL
   This protects the microphone from damage. Do not take the grill off, as there are no user service­able parts inside.

2. LED
   This light flashes once turned on and then will not light again under normal conditions. If the battery is low, the LED will flash.

3. ON/OFF SWITCH
   Turn the microphone on or off using this switch.

4. BATTERY COMPARTMENT
   This requires 2 x AA batteries (1.5v each). Do not use any other kind of battery with this microphone.

5. BATTERY COVER
   To remove, twist the battery cover anti-clockwise and continue turning until the cover can be slid off the end of the microphone. To re-attach, twist the battery clockwise until fully secure.

USING THE MEDIA PLAYER

1. USB INPUT
   Allows you to play any .mp3, .wma or .wav files.

2. SD CARD INPUT
   Allows you to play any .mp3, .wma or .wav files.

3. LCD DISPLAY
   Shows you all the functions that are currently being used.

4. MODE SELECT BUTTON
   Cycle between Bluetooth, SD, and USB connections.

5. PLAY/PAUSE
   Allows you to play and pause the audio.

6. STOP
   Allows you to stop the audio

7. LOOP
   Allows you to loop the current audio track (SD card and USB only). Pressing repeatedly allows you to change between looping current songs, repeating all songs in the particular folder, loop playback of all songs in all folders, and random playback.

8. SKIP BACK
   Go back one track (short press), or rewind (long press).

9. SKIP FORWARD
   Go forward one track (short press), or fast-forward (long press).

BLUETOOTH CONNECTION

To connect a Bluetooth device to the speaker’s digital media player, please follow the below steps.

• Ensure that the speaker is powered on and within range of the Bluetooth device.
• Press the MODE button on the speaker’s digital media player until ‘Bluetooth’ is displayed on the
• Open the Bluetooth settings on the Bluetooth-enabled device.
• Scan for Bluetooth devices and search for ‘SZPA-P12’ or ‘SZPA-P15’ in the devices list.
• Select ‘SZPA-P12′ or JSZPA-F1 5’. The Bluetooth enabled device should confirm that it is now
• Play audio from the Bluetooth-enabled device, ensuring that volume is turned up.
• Turn up the MP3 VOL dial on the speaker to the desired level.

WIRELESS MICROPHONE INFO

This product fully complies with all relevant standards in the Radio Equipment Directive (RED) 2014/53/EU. A full declaration of conformity is available at info@gear4music.com.

Please see the map for information about the use of the included wireless microphone in your region. More information can be obtained at info@gear4music.com or by contacting your local authority.

We want you to be completely satisfied with your purchase. Should you have any questions or queries about this product, contact the Gear4music hotline on +44 (0)330 365 4444 or at info@gear4music.com

SPECIFICATIONS

SZPA-P12
Speaker Size ………………………………. 12” + 1” Compression Driver
Amplifier Class …………………………. Class AB
Output Power …………………………… 60WRMS 85W PEAK 240W MAX
Frequency Response ………………..68Hz – 19KHz
Max SPL …………………………………. 109dB
Protection Circuits ………………… Short Circuit, Overcurrent Supported Media
Platforms ……………………………… Bluetooth, USB, SD
Input Channels …………………….. 2 x ¼” Jack Mic-in, 1 x stereo RCA line in
Output Channels …………………. 1 x stereo RCA Wireless Microphone
Frequency …………………………… 863.1 + 864.5MHz
Max RF Power ………………….. 10mW Mic Frequency
Response ………………………… 50Hz – 17KHz
Mains Power ………………… 220-240V50/60Hz
Mains Fuse Type ………….. T1A, 250V
Battery Fuse Type ……….. T10A, 250V
Power Consumption ……. 56W
Battery Life ………………… Up to 6 hours
Weight ……………………….12.2Kg
Dimensions ……………….. 420 x 645 x 345mm

SZPA-P15
Speaker Size ………………………………… 15” + 1” Compression Driver
Amplifier Class ………………………….. Class AB
Output Power …………………………… 80WRMS 115W PEAK 320W MAX
Frequency Response …………………. 68Hz – 19KHz
Max SPL ……………………………………. 112dB
Protection Circuits …………………….. Short Circuit, Overcurrent Supported Media
Platforms ………………………………….. Bluetooth, USB, SD
Input Channels ………………………… 2 x ¼” Jack Mic-in, 1 x stereo RCA line in
Output Channels ……………………… 1 x stereo RCA Wireless Microphone
Frequency ………………………………… 863.1 + 864.5MHz
Max RF Power ………………………… 10mW Mic Frequency
Response ………………………………… 50Hz – 17KHz
Mains Power …………………………. 220-240V50/60Hz
Mains Fuse Type ………………….. T1A, 250V
Battery Fuse Type ………………….. T10A, 250V
Power Consumption ……………… 56W
Battery Life ………………………….. Up to 6 hours
Weight …………………………………. 17.2Kg
Dimensions ………………………….. 485 x 690 x 345mm

KETTLESTRING LANE | YORK | YO30 4XF | UNITED KINGDOM
If you have any more questions about this product, please do not hesitate to contact the
Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>