AL-KO 3.22 SE / 3.82 SE Garden plus Hobby Lawnmower Instruction Manual
- June 4, 2024
- AL-KO
Table of Contents
AL-KO 3.22 SE / 3.82 SE Garden plus Hobby Lawnmower
Operating Instructions
About this handbook
- Read through these operating instructions before starting up the machine. This is a prerequisite for safe and trouble-free working.
- You should save these instructions, and also pass them on to any subsequent users.
- Observe the safety and warning signs on the machine.
Pictogram description
Caution!
Strict following of these warning alerts can pre-vent injury to persons and/or
materials.
Special information for better understanding and handling.
Product description
This documentation describes electric lawn mowers with grass collection boxes.
Some models are also suitable for mulching.
Identify your model with the aid of the product illustrations and the
description of the different options.
Designated use
This machine is intended for non-commercial mowing of lawns and must only be
used on dry grass.
Using this machine for any other or additional purpose is considered contrary
to its designated use.
Possible misuse
- This lawn mower is not for use in public areas, parks, sports facilities, agriculture or forestry.
- Any safety equipment present must not be removed or bypassed, e.g. by tying the safety bar to the bar.
- Do not use the machine in the rain or on wet grass.
- The machine must not be used commercially.
Safety and protective equipment
Danger – risk of injury!
Safety bar / safety handle
Depending on the version, the machine is fit- ted with either a safety bar or
a safety handle. In case of danger, simply release it. The motor and blade are
stopped.
Baffle
The baffle protects against objects flying out.
Symbols on the machine
Safety instructions **
**
The machine operator or user is responsible for accidents involving other persons and their property.
Caution!
Use the machine and extension lead only if they are in faultless technical
condition!
Safety and protective equipment must not be disabled!
Danger – risk o f injury!
Safety and protective equipment must not be disabled!
Electrical safety
Danger from electric current!
Danger from contact with live parts!
Immediately disconnect the plug from the mains if the extension lead is
damaged or severed!
- The domestic mains voltage must match the mains voltage specifications in the technical data; do not use any other supply voltage.
- Use only extension leads designed for use outdoors
- minimum cross-section 1.5 mm2.
- Damaged or brittle extension leads must not be used.
- Always check the condition of your extension lead before operating the machine.
- Always use the special cable strain relief for the extension lead.
- Always keep cables out of the cutting area and routed away from the machine.
- Never run over the extension lead with the lawn mower.
- Protect the machine against moisture.
Safety instructions for operation
-
Children and other persons who are unfamiliar with these operating instructions must not operate the machine.
-
Observe local regulations regarding minimum age requirements for operating the machine.
-
The machine must not be operated if the operator is under the influence of alcohol, drugs or medication.
-
Always check the machine for damage before using it and have any damaged parts replaced.
-
Carefully check the entire area to be mown and re- move all foreign bodies.
-
Wear appropriate working clothes:
-
Long trousers
-
Sturdy, non-slip shoes
-
Always ensure stability when working.
-
Keep third parties away from the danger area.
-
Keep body, limbs and clothing away from cutting parts.
-
Only work if there is sufficient daylight or artificial lighting.
-
Always unplug from the mains and wait until the ma- chine has stopped:
- In the event of faults or unusual vibration of the machine.
- Before releasing blockages.
- Before unclogging the machine.
- After contact with foreign bodies.
After contact with foreign bodies, check the lawn mower for damage. Carry out the necessary repairs before restarting and working with the lawn mower.
-
The operator must take particular care when turning the lawn mower or pulling it towards himself.
-
Do not mow over obstacles (e.g. twigs, tree roots).
-
Only remove cut grass when the motor is stopped.
-
Switch of the motor if it is necessary to cross an area other than the area to be cut.
-
Never lift or carry the machine with the motor running.
-
Do not leave the operational machine unattended.
Assembly
Follow the enclosed assembly instructions.
Caution!
The machine must not be operated before assembly work has been completed!
Attaching the grass collection box
Danger – risk o f injury!
Only remove or attach the grass collection box with the motor switched off and
the blade stationary.
- Lift the baffle and insert the grass collection box into the holder.
Emptying the grass collection box (11)
- Lift the baffle.
- Lift the grass collection box out of the holder and backwards to remove it.
- Empty the grass collection box.
- Lift the baffle and insert the grass collection box back into the holder.
Plug into mains
- Plug mains connector of the machine connecting cable into the switch/connector combination (15).
- Secure machine connecting cable with cable strain relief (14).
The loop of the mains cable must be long enough for the cable strain relief to slide from one side to the other.
Switching on the motor
Only start the lawn mower on even ground and not in long grass. The ground
must be free of foreign bodies, such as stones. Do not lift the lawn mower to
start it.
- Press the start button on the switch/connector combination and hold it down (15-1).
- Pull the safety bar / handle against the bar and hold it there (15-2).
- Release the start button.
Switching off the motor
- Release the safety bar / handle.
- Wait until the blade has stopped moving.
Work instructions
Comply with local regulations regarding operation of lawn mowers.
- Carefully check the entire area to be mown and re- move all foreign bodies.
- Only operate the lawn mower if there are no third parties in the danger area.
- Only mow if visibility is good.
- Only operate the machine at walking pace.
- Only operate the mower if the blade is sharp.
- Do not mow over obstacles (e.g. twigs, tree roots).
- On sloping terrain, always mow across the slope. Do not mow uphill or downhill or on slopes where the inclination exceeds 20°.
- Exercise particular care when changing direction on sloping terrain.
Tips for mowing
- Start mowing as close as possible to the power socket.
- Always keep the extension lead on the section of lawn than has already been mown.
- Maintain a constant cutting height of 3 -5 cm; do not shorten the grass to less than half its original height.
- Do not overload the lawnmower! If the motor speed drops perceptibly due to long, heavy grass, in- crease the cutting height and mow several times.
- Mow in the morning or late afternoon to prevent the freshly cut grass from drying out.
- During phases of strong growth, mow twice weekly; in periods of low rainfall, increase intervals between mowing accordingly.
Storage
- Always unplug the machine from the mains for storage.
- To save space during storage, fold down the upper bar.
- Store the machine in a dry condition and out of reach of children and unauthorized persons
Repairs
- Repair work may only be carried out by AL-KO Service Centres and authorized specialist work- shops.
- To prevent loss of balance, cutting tools and fastening bolts must be exchanged together.
Maintenance and care
Danger – risk of injury!
Always unplug from the mains before commenc-ing any maintenance or preventive
maintenance work!
Always wear protective gloves when carrying out maintenance or preventive
maintenance work on the blade!
Unbalanced blades cause strong vibrations and damage the mower.
- Regularly check the grass collection system for correct operation and wear.
- After mowing, clean the machine thoroughly with a brush or cloth. Dirt not removed from the underside of the machine may have a detrimental effect on its performance.
- Do not spray the machine with water! The switch/connector combination and the electric motor may be destroyed if water gets into them.
- Regularly check the blade for damage. Only have blunt or damaged blades sharpened or replaced at an AL-KO Service Centre or authorized specialist workshop. Resharpened blades must be balanced. Tightening torque of the blade screw 15 Nm +5
Caution!
The blade and the motor shaft must not be aligned!
After maintenance work on insulated parts
(e.g exchanging a blade and insolation protection check must be carried out
in accordance with VDE Guideline 701.
- Professional inspection required:
- After collision with an obstacle
- After sudden stoppage of the motor
- If the blade is bent
- If the motor shaft is bent
Troubleshooting
For faults not listed in this table, or which you cannot
resolve by yourself, please contact our customer service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>