AL-KO 46.4 E Comfort Lawn Mower Instructions

AL-KO 46.4 E Comfort Lawn Mower

ABOUT THIS HANDBOOK

• Read this documentation before starting up the machine. This is a precondition for safe working and flawless operation.
• Observe the safety warnings in this documentation and on the product.
• This documentation is a permanent integral part of the product described and must be passed on to the new owner if the product is sold.

Explanation of symbols

CAUTION!
Following these safety warnings carefully can prevent personal injury and/or material damage.

Special instructions for greater ease of understanding and improved handling.

PRODUCT DESCRIPTION

This document describes the electric lawn mower with a catcher. Several models are also suitable for mulching.
Identify your model using product pictures and a description of the various options.

Designated use

This unit is intended to mow lawns in private use and may only be used on dry lawns.
Any other use is deemed as being not in accordance with its intended use.

Possible misuse

• This unit is not intended for use in public grounds, parks, and sporting arenas, as well as in agriculture and forestry
• Do not remove or bypass safety devices.
• Do not use the mower during rain and/or on a wet lawn.
• The device may not be used for commercial purposes.

Safety and protective equipment

CAUTION!
Risk of injury!
Safety and protective devices should not be disabled.
Safety bar/safety handle
According to the design, the unit is equipped with a safety bar or safety handle. Simply release it in case of danger. Stop the motor and cutting blade.
Baffle
The baffle protects against objects flying out.

TECHNICAL DATA

Product Overview

1. Switch – plug – combination*
2. Safety bar*
3. Safety handle*
4. Cable tension relief
5. Fill level indicator
6. Baffle plate
7. Grass catcher
8. Cutting height adjustment*
9. Operating instructions
10. Wheel drive

depending on version

Symbols on the machine

• Attention!
  Special care required during use!

• Read the instructions before start-up!

• Attention!
  Keep hands and feet away from the cutter area!

• Attention!
  Sharp cutter blades!

• Attention!
  Keep the connecting cable away from the cutter area!

• Attention!
  Keep other persons away from the danger area!

• Always disconnect the device from the mains before maintenance work or if the cable is damaged.

• Do not reach into the cutter area!

• Keep a distance from the danger area!

• Keep a distance to the connecting cable!

• Keep the connecting cable away from the cutter area!

• Symbol only valid for petrol lawn mowers!

SAFETY INSTRUCTIONS

The lawn mower operator or user is responsible for accidents involving other persons and their property.

CAUTION!
Use the machine only in perfect working order.
CAUTION!
Risk of injury!
Safety and protective devices should not be disabled.

Electrical safety

CAUTION!
Danger due to contact with live parts!
Immediately remove the plug from the mains if the extension cable has been damaged or cut!
We recommend connection using an earth leakage circuit breaker (FI) with a nominal fault current of <30 mA.

• The in-house mains voltage must match the mains voltage specifications with regard to the technical data; do not use a different supply voltage.

• Only use extension cables intended for outdoor use – minimum cross-section of 1.5 mm².
  Always unroll the cable drum completely.

• Damaged or brittle extension cables may not be used.

  • Check the condition of your extension cable before every use.

• Always use the special cable tension relief for the extension cable.

• Keep the cable out of the cutting area and always guide it away from the machine.

• Never run over the extension cable with the lawn mower.

• Protect the unit from moisture!

Safety instructions for operation

CAUTION!
Risk of injury!
The cutting blade continues to rotate after the motor has been switched off!

• Children and persons who are not familiar with these operating instructions are not permitted to use the device or perform maintenance and cleaning.

• Persons with physical, sensory or mental handicaps or persons with insufficient knowledge or experience may not use the device unless they are supervised or instructed by a responsible person.

• Keeps these operating instructions for future reference.

• Never mow while persons, especially children or animals are nearby.

• Do not wear loose-fitting clothing with hanging laces or belts.

• Worn or damaged information labels must be replaced.

• Stop the cutting blade if:

  • the mower tilts
  • when transporting over other areas than grass
  • when transporting between two areas to be mowed

• Lawnmowers with damaged safety devices and safety grilles or without attached safety devices, e.g. deflector plate and/or grass catcher systems.

• When starting the motor, the lawnmower may not be tilted unless the lawnmower must be raised during the procedure. In this case, only tilt the lawn mower up as much as is required on the side opposite the user.

• Do not start the motor if you are standing in front of the discharge chute.

• Start or operate the starter switch with caution according to the manufacturer instructions.

• Observe the local regulations governing the minimum age of the operator.

• Do not operate the device when under the influence of alcohol, drugs or medication.

• Prior to each use, check the unit for damage and have damaged or worn parts replaced.

• Remove foreign objects in the working area.

• Keep connecting cables out of the working area.

• Wear suitable work clothing:

  • Long trousers
  • Firm and slip-resistant footwear

• Ensure that you have a sound footing when working.

• Keep other persons away from dangerous areas.

• Keep body, body parts and clothing away from the cutter area.

• Only work when there is adequate daylight or artificial lighting.

• Always disconnect the plug from the mains and wait for the unit to come to a standstill:

  • Whenever you leave the lawn mower
  • Before you inspect the lawn mower, clean it or perform work on it
  • After faults or unusual vibrations occur in the unit
  • Before loosening blockages
  • Before eliminating stoppages
  • After contact with foreign bodies
    After contact with foreign objects inspect the mower for damage. Perform the necessary repairs before starting again and begin working with the lawn mower.

• If the lawn mower begins to vibrate strongly in an unusual way, and immediate inspection is necessary:

  • Inspect for any damage
  • Perform the necessary repair of damaged parts
  • Tighten all nuts, bolts, and screws firmly

• Play special attention when turning the lawn mower or pulling it towards you.

• Do not mow over obstacles (e.g. branches, roots of trees).

• Only remove cuttings when the motor is at a standstill

• Never lift or carry the unit while the motor is running.

• Never leave the device unattended when it is ready for operation.

If the mains supply conditions are not sufficient, brief drops in the mains voltage may occur when the unit is switched on and this may affect other devices (e.g. flickering lamps).
For a mains impedance of Zmax < 0.286 Ω these types of interference are not to be expected.

ASSEMBLY

Observe the enclosed installation instructions.
CAUTION!
The unit must only be operated after it has been fully assembled

OPERATION

Adjust the cutting height.

CAUTION!
Risk of injury!
Adjust the cutting height only when motor is switched off and the cutting blade has stopped!

Always adjust all wheels to the same cutting height.
Cutting height adjustment depends on the model.

Axle adjustment or central adjustment

Always adjust both axles to the same cutting height.

1. To unlock, press the lever to the side and hold. (1)

   • For a short lawn, slide the lever in the direction of the front wheel.
     For a longer lawn, slide the lever in the direction of the rear wheel.

2. Allow the lever to engage.

Single wheel quick adjustment

Always adjust both axles to the same cutting height.

1. To unlock, press the lever to the side and hold.
   • For a short lawn, slide the lever in the direction of the front wheel.
   • For a longer lawn, slide the lever in the direction of the rear wheel.
2. Allow the lever to engage.

Single wheel adjustment

1. Loosen the wheel bolt.
2. Insert the wheel bolt in the hole for the desired cutting height.
3. Tighten the wheel bolt.
4. Make sure all wheels at the same hole position.

Working height adjustment (option)

Button adjustment

1. Hold both buttons on the upper handle bar pressed and adjust to the desired position.
2. Release the buttons so that the upper handle bar engages.

Clamp adjustment

1. Hold the upper handle bar firmly and release both clamps.
2. Move the upper handle bar to the desired position and close the clamps.

Attaching the grass catcher

CAUTION!
Risk of injury!
Remove or replace the grass catcher only while the motor is switched off and the cutting blade has stopped.

1. Lift up the baffle plate and hang the grass catcher into the holders.

Fill level indicator (option)
The level indicator is pressed upwards by the air stream during mowing
If the grass catcher is full, the level indicator lies flat on the box The grass catcher needs to be emptied.

Emptying the grass catcher

1. Lift the baffle plate.
2. Unhook the grass catcher and remove it to the rear.
3. Entity the grass catcher.
4. Lift up the baffle plate and hang the grass catcher back into the holders.

Establishing the mains connection

1. Insert the mains plug of the unit connecting line into the switch/plug combination.
2. Secure the unit connecting cables with the cable tension relief.

The loop of the mains cable must be long enough so that the cable tension relief can glide from one side to the other.

Starting the motor
Start the lawn mower only on level ground and not in high grass. The ground must be free from foreign objects, such as stones. Do not lift or tilt the lawn mower to start it.

1. Keep the start switch of the switch/plug combination pressed.
2. Pull the safety bar towards the handle bar and hold it there.
3. Release the start button.

Switching off the engine

1. Release the safety bar / handle.
2. Wait until the cutting blade stops.

Wheel drive (option)

CAUTION: Engage the transmission only when the motor is running.

Switching on the wheel drive

1. Press and hold the transmission control lever against the upper handle bar – the transmission control lever does not engage.
   • Wheel drive is switched on.

Switching off the wheel drive

1. Release the transmission control lever.
   • Wheel drive is switched on.

WORKING INFORMATION

Observe the local regulations on operating lawnmowers.

• Remove all foreign objects from the lawn prior to mowing
• Keep others away from dangerous areas.
• Use the mower only if visibility is good
• Guide the machine at a walking pace.
• Mow only with a sharp cutting blade
• Do not mow over obstacles (e.g. branches, roots of trees).
• Mow only across slopes. Do not use the mower up or down slopes and not on slopes with more than a slant of 20 degrees.
• Added care must be taken on slopes when changing direction

Tips for mowing

• Start mowing as close to the socket as possible.
• Always keep the extension cable on the previously mowed lawn area.
• Constant cutting height 3-5 cm, do not cut more than half the height of the lawn.
• Do not overload the lawn mower! If the motor speed is greatly reduced due to long, heavy grass, raise the cutting height and mow several times.
• Mow in the morning or late afternoon to protect the freshly cut lawn from drying out.
• Mow the lawn twice per week during the strong growing phases. Mow less during periods of less rain.

Mulching with the mulching kit (option)
With mulching, the cuttings are not collected and remain on the grass. The mulch protects the ground from drying out and provides it with nutrients. The best results are achieved by regular cutting of approx. 2 cm. Only young grass with soft blades will decompose quickly.

• Height of grass before mulching: maximum 8 cm
• Height of grass after mulching: minimum 4 cm

Adapt your walking speed to the mulching and do not go too quickly.

Utilising the mulch kit
CAUTION!
Risk of injury due to rotating parts! Remove or replace the mulch kit only while the motor is switched off and the cutting blade has stopped.

1. Remove the grass catcher
2. Lift up the baffle plate and insert the mulch kit into the discharge chute.
   • Mulch kit must audibly engage

If the mulch kit does not engage, the mulch kit and cutting blade can be damaged.

Removing the mulch kit

1. Lift the baffle plate.
2. Release the locking on the mulch kit. (4b-2)
3. Pull out the mulch kit.

Wheel drive (option)

Adjusting the Bowden cable
If the wheel drive can no longer be switched on or off while the motor is running, the corresponding Bowden cable must be readjusted.

CAUTION!
Risk of injury!
Only adjust the Bowden cable when the motor is switched off.

1. Turn the adjustment part on the Bowden cable in the direction of the arrow.
2. To check the adjustment, start the motor and switch on the wheel drive.
3. If the wheel drive still does not function, bring the lawn mower to a service centre or an authorized specialist firm.

Oiling the drive pinion

• Oil the drive pinion on the drive shaft from time to time with spray oil.

The transmission of the wheel drive is maintenance-free.

STORAGE

• Always store the unit with the mains plug pulled.
• Fold the upper handlebar to save space during storage.
• Store the mower in a dry place and inaccessible to children and unauthorized persons.

REPAIRS

• Repairs may only be carried out at AL-KO service centres or authorized specialist firms.
• To avoid an imbalance, the cutting units and the fastening bolts must only be replaced as a set

MAINTENANCE AND CARE

CAUTION!
Risk of injury!

• Always pull the mains plug before carrying out maintenance and care!
• Always wear work gloves when carrying out maintenance and care on the cutting tools!
• Non-balanced cutting blades cause serious vibrations and damage the mower.
• Regularly check the grass catcher system for correct function and wear.
• After mowing, thoroughly clean the mower with a hand broom or a cloth. Dirt and cuttings left on the underside of the mower can impair its proper function.
• Do not hose down the unit with water! Water can damage the switch/plug combination and the electric motor.
• Regularly check the cutter blade for damage.
• Have the blunt or damaged cutter blades sharpened or replaced only at an AL-KO service centre or authorized specialist firm. Resharpened cutter blades must be balanced.
• Tightening torque of the blade screw 15 Nm +5
• Ensure that all nuts, bolts and screws are firmly tightened and that the mower is in a safe condition for operation.
• Observe that on devices with multiple cutting blades, the movement of one cutting blade can lead to the rotation of the remaining blades.
• Observe when adjusting the machine that no body parts can be jammed between the cutting blades and fixed parts of the unit.
• Allow the motor to cool before turning off the unit.
• Observe that the cutting blade can still be moved even when the voltage supply is switched off.
• Only use original replacement parts and accessories

CAUTION!
Cutting blade and motor shaft may not be aligned if damaged!
CAUTION!
Risk of injury!
After the blade screw has been loosened five times, it must be replaced with an original blade screw!
After maintenance work on isolation parts (e.g. exchange of the cutting blades), an isolation protection test must be performed according to guideline VDE 701.

A professional inspection is necessary:

• After running onto an obstacle
• At immediate standstill of the motor
• When the cutting blade is bent
• When the motor shaft is bent

TROUBLESHOOTING

CAUTION!
Risk of injury!

• Always pull the mains plug before carrying out maintenance and care!
• Wait until the cutting blade stops!

If faults are not listed in this table or you are unable rectify them yourself, please consult our customer service department.

• Professional inspection is always necessary:
  • After running onto an obstacle
  • At immediate standstill of the motor
  • For transmission damage
  • For defective V-belt
  • When the cutting blade is bent
  • When the motor shaft is bent

DISPOSAL
Do not dispose of worn-out machines or spent batteries (including rechargeable batteries) in domestic waste!
The packaging, machine and accessories are made from recyclable materials and must be disposed of accordingly.

WARRANTY
We will address claims for any defects in materials and workmanship during the statutory period of limitation by means of repairs or replacements of our choice. The period of limitation is governed by the laws of the country in which the machine was purchased.

Our warranty applies only if:

• The machine has been properly handled
• The operating instructions have been adhered to
• Original replacement parts have been used

The warranty is no longer in effect if:

• Efforts have been made to repair the machine
• Technical modifications have been made to the machine
• The machine has not been used for its intended purpose

The warranty does not cover:

• Damage to paint work through normal use
• Parts subject to wear as indicated in the replacement parts list with a box [xxx xxx (x)]
• Internal combustion engines – separate warranty conditions of the respective engine manufacturer apply

The warranty period begins with the purchase by the first buyer. The warranty period begins on the date that appears on the original purchase receipt. In the event of a warranty claim, please your contact supplier or the nearest authorised customer service centre with this warranty declaration and the purchase receipt in hand. This warranty does not affect the legal warranty claims by the purchaser against the seller.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>