brother HL-B2100D Single Function Black And White Laser Printer User Guide

brother HL-B2100D Single Function Black And White Laser Printer

Product Specifications

• Models: HL-B2100D, HL-B2100DB, HL-B2150W, HL-B2180DW, HL-B2180DWB, HL-B2181DW, HL-L2400D, HL-L2400DW, HL-L2440DW, HL-L2445DW, HL-L2461DW, HL-L2460DW, HL-L2460DN, HL-L2461DN, HL-L2460DWXL, HL-L2865DW, DCP-B7600DB, DCP-B7620DW, DCP-B7620DWB, DCP-B7640DW, DCP-B7640DWB, HL-L2464DW, DCP-L2605DW, DCP-L2600D, DCP-L2625DW, DCP-L2640DW, HL-L2480DW, DCP-L2680DW, MFC-B7810DW, MFC-B7810DWB, MFC-B7811DW, MFC-L2800DW, MFC-L2805DW, MFC-L2806DW, MFC-L2820DW, MFC-L2861DW, MFC-L2886DW, MFC-L2885DW, MFC-L2880DW, MFC-L2880DWXL, MFC-L2920DW
• For more information: Online User’s Guide

Product Safety Guide

Symbols and Conventions Used in the Documentation

• WARNING: Indicates a potentially hazardous situation which could result in death or serious injuries.
• CAUTION: Indicates a potentially hazardous situation which may result in minor or moderate injuries.
• IMPORTANT: Indicates a potentially hazardous situation which may result in damage to property or loss of product functionality.
• NOTE: Specifies the operating environment, conditions for installation, or special conditions of use.

Font Styles Used in the Documentation

• Bold: Identifies specific buttons on the product’s control panel or on the computer screen.
• Italics: Emphasizes an important point or refers you to a related topic.
• Courier New: Identifies messages on the LCD of the product.

Choose a Safe Location for Your Product

• WARNING: Do not place the product near heaters, air conditioners, electrical fans, refrigerators, or water to avoid the risk of electrical shock, short circuit, or fire.
• CAUTION: Do not expose the product to direct sunlight, excessive heat, open flames, corrosive gasses, moisture, or dust to prevent electrical shock, short circuit, or fire.
• CAUTION: Do not block any slot or opening in the product as it may lead to overheating and fire.

Product Usage Instructions

General Guidelines
Follow these steps to ensure proper usage of your product:

1. Read the user manual carefully before setup.
2. Place the product on a stable and flat surface.
3. Connect the power cord to a grounded outlet.
4. Install any necessary drivers or software on your computer.

Printing Instructions
To print a document:

1. Load paper into the input tray.
2. Select the document on your computer and choose print.
3. Adjust print settings if necessary.
4. Press the print button on the control panel of the printer.

Scanning Instructions
If your model includes scanning functionality:

1. Open the scanner lid and place the document face down on the glass.
2. Select the scan option on the printer’s control panel or through the computer software.
3. Adjust settings such as resolution and file format.
4. Initiate the scan process and save the scanned document to your desired location.

Frequently Asked Questions (FAQ)

• Q: How do I check the toner level of my printer?
  A: To check the toner level

  • Access the printer’s control panel menu.
  • Navigate to the toner or supplies section.
  • View the remaining toner level displayed on the screen.

• Q: What should I do if my prints are coming out faded?
  A: If your prints are faded:

  • Check the toner level and replace if low.
  • Clean the printer’s print heads or cartridges.
  • Adjust print settings for higher quality output.

Read this guide before attempting to operate the product, or before attempting any maintenance, and ensure that you follow all warnings and instructions marked on the product. If you have concerns about how to use your product safely after reading this guide, contact Brother customer service or your local Brother dealer. Failure to follow these instructions may result in an increased risk of personal injury or damage to property, including through fire, electrical shock, burns or suffocation. Brother shall not be liable for the damage caused where the product owner has failed to follow the instructions set out in this guide or on the product. For more advanced instructions, information, and product specifications, see the Online User’s Guide at support.brother.com/manuals.

Symbols and Conventions Used in the Documentation

• WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries.
• CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
• IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in damage to property or loss of product functionality
• NOTE specifies the operating environment, conditions for installation, or special conditions of use.
• Hot Surface icons warn you not to touch product parts that are hot.
• Prohibition icons indicate actions that must not be performed.
• Electrical Hazard icons alert you to the possibility of an electric shock.
• Fire Hazard icons alert you to the possibility of a fire.

Font Styles Used in the Documentation

The definitions of font style are as follows:

• Bold Bold typeface identifies specific buttons on the product’s control panel or on the computer screen.
• Italics Italicised style emphasises an important point or refers you to a related topic.
• Courier New Text in Courier New font identifies messages on the LCD of the product.

Compilation and Publication Notice

• Not all models are available in all countries.
• The illustrations in this guide show the HL-L2460DW/MFC-L2820DW.
• This product’s manuals have been compiled and published to provide the latest product safety information at the time of publication. The information contained in these manuals may be subject to change.

For the latest manuals, visit support.brother.com. ©2023 Brother Industries, Ltd. All rights reserved.

Choose a Safe Location for Your Product
WARNING

• Choose a location where the temperature remains between 10°C and 32.5°C, the humidity is between 20% and 80%, and where there is no condensation.
• DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water. Doing so may create the risk of an electrical shock, short circuit, or fire, as water may come into contact with the product (including condensation caused by heating/air conditioning/ventilation equipment).
• DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses, moisture, or dust. Doing so may create a risk of an electrical shock, short circuit, or fire, causing damage to the product and/or rendering it inoperable.
• DO NOT place the product near chemicals or in a place where chemicals could be spilled on it. Should chemicals come into contact with the product, there may be a risk of fire or electrical shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover, or deodoriser may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or electrical shock. These or other chemicals may cause the product to malfunction or become discoloured.
• DO NOT place this product on an unstable cart, stand, or table, particularly if children are expected to be near the product. The product is heavy and may fall, causing injury to you or others and serious damage to the product. For products with scanning functionality, there is an added risk of injury if the scanner glass should break.
• DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the machine’s ventilation could create a risk of overheating and/or fire.

CAUTION

• Keep a minimum gap around the product as shown in the illustration.

Products without the scanning function
HL-B2100D/HL-B2100DB/HL-B2150W/HL-B2180DW/HL-B2180DWB/HL-B2181DW/HL-L2400D /HL-L2400DW/HL-L2440DW/HL-L2445DW/HL-L2461DW/HL-L2460DW/HL-L2460DN/HL-L2461DN /HL-L2460DWXL/HL-L2865DW:

Products with the scanning function
DCP-B7600DB/DCP-B7620DW/DCP-B7620DWB/DCP-B7640DW/DCP-B7640DWB/HL-L2464DW /DCP-L2605DW/DCP-L2600D/DCP-L2625DW/DCP-L2640DW/ HL-L2480DW/DCP-L2680DW/MFC- B7810DW/MFC-B7810DWB/MFC B7811DW/MFC-L2800DW/MFC-L2805DW/MFC-L2806DW/MFC- L2820DW/MFC-L2861DW/MFC-L2886DW/MFC-L2885DW/MFC-L2880DW/MFC-L2880DWXL/MFC- L2920DW:

1. Place the product on a solid level surface.
2. DO NOT place this product near or over a radiator or heater.
3. DO NOT place this product in any installation unless adequate ventilation is provided.

• Put your product on a flat and stable surface (such as a desk), that is free from vibration and shocks. Put the product near a telephone socket (models with the fax function only) and a standard earthed electrical socket.
• Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the product is in a safe location where it cannot be accidentally knocked over, which could cause injury to you or others and serious damage to the product.
• Ensure that cables and cords leading to the product are secured so as not to pose a tripping hazard.
• DO NOT place heavy objects on the product.
• DO NOT place any objects around the product. Such objects block the access to the electrical socket in case of emergency. It is important that the product can be unplugged whenever needed.
• This product emits some chemical substances during printing, and additionally if used for prolonged periods or in poorly ventilated areas may cause the emission of odorous gases such as ozone. Place the product in a well-ventilated area for optimum performance and comfort.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or generate magnetic fields. Doing so may interfere with the operation of the product, causing print quality problems.
• DO NOT place your product next to sources of interference, such as speakers or the base units of cordless telephones. Doing so may interfere with the operation of the product’s electronic components.

Connect the Product Safely

WARNING

• ELECTRICAL HAZARDS
  Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you could cause a short circuit, which may create the risk of fire.

• There are high-voltage electrodes inside the product. Before you access the inside of the product, including for routine maintenance such as cleaning, make sure you have unplugged the telephone line cord first (models with the fax function only) and then the power cord from the electrical socket, as well as any telephone/RJ-11 (models with the fax function only) or Ethernet/RJ-45 cables (network models only) from the product.
  DO NOT push objects of any kind into this product through slots or openings in the product, as they may touch dangerous voltage points or short-out parts.

• DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

• Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if the cord has become worn or frayed.

• Unplug the power plug regularly to clean it. Use a dry cloth to clean the root of the plug blades and between the blades. If the power plug is plugged into the socket over a long period, dust accumulates around the plug blades, which may cause a short circuit, resulting in a fire.

• DO NOT drop any metal objects or any type of liquid on the power plug of the product. It may cause an electrical shock or a fire.

• This product should be connected to an AC power source within the range indicated on the rating label on your machine. DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a qualified electrician.

Use the Product Safely

WARNING
Plastic bags are used in the packing of this product. Plastic bags are not toys. To avoid the danger of suffocation, keep these bags away from babies and children, and dispose of them correctly.

ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you could cause a short circuit, which may lead to fire.

• DO NOT dismantle this product. Dismantling this product could cause a fire or electrical shock.
• DO NOT attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage points and other risks and may void your warranty. Refer all servicing to Brother customer service or your local Brother dealer.
• If the product has been dropped or the casing has been damaged, there may be the possibility of an electrical shock. Unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer.
• If water, other liquids, or metal objects get inside the product, immediately unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer.
• DO NOT use this product during a thunderstorm. There may be a remote risk of an electrical shock from lightning.

FIRE HAZARDS
Failure to follow the warnings in this section may create the risk of fire.

DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire. Instead, use only a dry, lint-free cloth. For instructions on how to clean the product, see the Online User’s Guide.

DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside the product. Prolonged contact of paper with the fuser unit could cause a fire.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with a dry, lint-free soft cloth, and dispose of it according to local regulations.

(Models with the Wireless LAN function only)
DO NOT use the product near any medical electrical equipment. The radio waves emitted from the product may affect medical electrical equipment and cause a malfunction, which may result in accident or injury.

For users with pacemakers:
(Models with the Wireless LAN function only)
This product generates a weak magnetic field. If you feel anything wrong with the operation of your pacemaker when near the product, move away from the product and consult a doctor immediately.

• DO NOT place metal objects, such as clips, staples, or jewellery on the product. If these objects contact the electrical parts inside the product, it may cause a fire or electrical shock.
• DO NOT place a container holding water or liquid on the product. The water or liquid in the container may spill into the product, making contact with the electrical parts inside the product, which may cause a fire or electrical shock.

HOT SURFACE
Immediately after using the product, some internal parts of the product will be extremely hot. Wait at least 10 minutes for the product to cool down before you touch the internal parts of the product.

• If the product becomes unusually hot, releases smoke, generates any strong smells, or if you accidentally spill any liquid on it, immediately unplug the product from the electrical socket. Contact Brother customer service or your local Brother dealer.
• (Models with the fax function only)
  Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged from the wall socket.
  Never install telephone wiring during a thunderstorm. Never install a telephone wall socket in a location that is wet or may become wet, for example, near a refrigerator or other appliance that produces condensation.

Power Cord Safety:

• This product is equipped with an earthed plug. This plug will only fit into an earthed electrical socket. This is a safety feature. If you are unable to insert the plug into the socket, ask your electrician to replace your obsolete socket. DO NOT attempt to defeat the purpose of the earthed plug.
• DO NOT allow anything to rest on the power cord.
• DO NOT place this product where others might step on the cord.
• DO NOT place this product in a position where the cord is stretched or strained as it may become worn or frayed.
• DO NOT use the product or handle the cord if the cord has become worn or frayed. If unplugging your product, DO NOT touch the damaged/frayed part.
• DO NOT pull on the middle of the power cord; pulling on the middle may cause the cord to separate from the plug. Doing this might cause an electrical shock.
• DO NOT use any undesignated cables (or optional devices). Doing so may cause a fire or injuries. Installation must be performed correctly according to the Quick Setup Guide.
• Brother strongly recommends that you DO NOT use any type of extension cord.
• This product should be positioned so that nothing pinches or constricts the power cord.
• DO NOT use cables that do not meet the cable specifications described in the Online User’s Guide: Specifications. Doing so may cause a fire or injuries.
• If the power cord is provided with this product, use ONLY the provided cord. Installation must be performed correctly as described in the Quick Setup Guide.

When you move the product, carry the product as shown in the illustration.

CAUTION
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.

• For your safety, unplug the product from the electrical socket when it is not used for a long time.
• When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product.
• Some products and/or their cartons contain a silica gel pack. DO NOT eat the silica gel pack; throw it away. If you ingest it, seek medical attention immediately.
• Keep toner cartridges out of the reach of children. If toner powder is swallowed, consult a doctor immediately.
• We recommend placing the toner cartridge and drum unit assembly on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. If toner scatters on your hands or clothes, immediately wash it off with soap and cold water.

Should you come into contact with toner, follow these instructions:

• Inhalation
  Obtain immediate medical attention. In case of accidental inhalation, move to fresh air immediately, then obtain medical attention.

• Skin contact
  Remove contaminated clothing immediately and wash the affected skin with soap and cold water.

• Eye contact
  Obtain medical attention. If the toner has got into the eyes, immediately wash out the eyes with water continuously, for at least 15 minutes.

• Ingestion
  Obtain immediate medical attention. Wash out mouth with water and drink 200 – 300 ml (one cup) of water.

DO NOT attempt to dismantle the toner cartridge. If toner dust should leak out, avoid inhaling it or letting it come in contact with your skin.
DO NOT run your hand over the edge of the paper. The thin and sharp edges of the paper may cause an injury
This machine contains electronic components that emit electromagnetic radiation during the printing operation. To avoid the possibility of electromagnetic radiation exposure to your body, maintain a distance of 7.87 inches (20 cm) from both sides of the machine when printing.
DO NOT remove or damage any of the caution or warning labels inside the product.

IMPORTANT

• A distinct change in the product’s performance may indicate a need for service.
• DO NOT connect your product to an electrical socket controlled by wall switches or automatic timers, or to the same circuit as a large appliance or other equipment that requires a significant amount of electricity. It could disrupt the power supply. Disruption of the power supply may also delete information from the product’s memory, and repeated cycling of the power supply can damage the product.
• DO NOT put any objects on top of the product. Doing so may cause the product to malfunction.
• If the product does not operate normally when the operating instructions are followed, adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

Product Warranty & Liability

Nothing in this guide shall affect any existing product warranty or be construed as granting any additional product warranty. Failure to follow the safety instructions in this guide may invalidate your product’s warranty.

WARNING

• Only use the power cord supplied with this product (if included in the box).

Disconnect machine

• This product must be installed near an electrical socket that is easily accessible. In case of an emergency, you must unplug the power cord from the electrical socket to shut off the power completely.

Declaration of Conformity

(Europe Only)
We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this product is in conformity with the relevant EU harmonization legislation (Europe only) and UK legislation (Great Britain only).
The Declaration of Conformity (DoC) can be downloaded from our website. Visit support.brother.com/manuals.

EU Declaration of Conformity for RE Directive 2014/53/EU
(Europe Only) (Applicable to Models with Radio Interfaces)
We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that these products are in conformity with the provisions of the RE Directive 2014/53/EU. A copy of the Declaration of Conformity can be downloaded by following the instructions in the Declaration of Conformity (Europe Only) section.

IEC 60825-1:2014 (For 220-240V Models Only)
This product is a Class 1 laser product as defined in the IEC 60825-1:2014 standard. The label shown below is attached in countries where required.

IEC 60825-1:2014 (For 220-240V Models Only) EN 60825-1:2014+A11:2021 (Europe Only)
This product has a Class 3B laser diode which emits invisible laser radiation in the laser unit. The laser unit must not be opened under any circumstances.
Internal laser radiation
Wavelength: 775 nm – 800 nm
Output: 25 mW max.
Laser class: Class 3B

WARNING
Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

NFC (Models with the NFC Function Only)
This Printer/Multifunction Printer supports NFC (Near Field Communication).

• (MFC-L2886DW/MFC-L2885DW/MFC-L2920DW)
  Frequency band(s): 13.553 MHz – 13.567 MHz
  Maximum radio-frequency power transmitted in the frequency band(s): Less than 111.5 dBuV/m at 10 m

LAN Connection (Models with the Wired LAN Function Only)
CAUTION

• DO NOT connect this product to a LAN connection that is subject to over-voltages.

For Models with FAX Function (New Zealand Only)

1. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
2. This equipment does not fully meet Telecom’s impedance requirements. Performance limitations may occur when used in conjunction with some parts of the network. Telecom will accept no responsibility should difficulties arise in such circumstances.
3. This equipment should not be used under any circumstances which may constitute a nuisance to other Telecom customers.
4. This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
5. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.
6. Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom’s Specifications:
7. There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation.
8. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt.
9. Automatic calls to different numbers are spaced such that there is no less than 5 seconds between the end of one call attempt and the beginning of another.
10. Equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing.
11. Many CPE devices have features such as “last number redial” or “memory dial” which depend on a small on-hook line current for the maintenance of memory information. Such terminal devices used with the series connected device may lose their memory functions.
12. Telepermitted equipment only may be connected to the EXT telephone port. This port is not specifically designed for 3-wire-connected equipment. 3-wire-connected equipment might not respond to incoming ringing when attached to this port.
13. In the event of any problem with this device, it is to be disconnected, and a CPE item connected to one of its terminal ports may be connected directly in its place. The user should then arrange for the product to be repaired. Should the matter be reported to Telecom as a wiring fault, and the fault is proven to be due to this product, a call-out charge will be incurred by the customer.
14. If a charge for local calls is unacceptable, the “Dial” button should NOT be used for local calls. Only the 7-digits of the local number should be dialled from your telephone. DO NOT dial the area code digit or the “0” prefix.
15. This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
16. This unit will only work in conjunction with a tone signalling (DTMF) telephone, but some telephones may not be compatible. Since noise or speech from the telephone can upset dialling from this unit, errors may result if the devices are used together in other than quiet conditions.
17. Where it is necessary to dial prefix digits, such as a Caller Display override code (“0196” or “0197”), this unit will have to be used in conjunction with an associated tone signalling (DTMF) telephone.
18. Note that some telephones are NOT compatible with this unit and dialling errors may result if the two devices are used together in other than quiet conditions. The Telecom Faults Service is NOT to be called should such problems arise. In such cases, it is recommended that the prefix and wanted number are dialled manually.
19. The answer delay setting of this equipment shall not be set to less than the default setting as this will destroy Caller ID information.
20. The caller ID telephone numbers which are displayed and stored in this equipment include the caller’s area code or cellular code but do not include the toll access “0” prefix. When calling back it is necessary to add a “0” to the telephone number, or if the telephone number is a local number, omit the area code digit. If the toll services of a service provider other than Telecom are being used then a toll charge may be incurred if the “0” prefix toll access code and area code are used.
21. When using the Caller Line Identification incorporated in this device, verify the integrity of the recorded digits prior to dialling.

For WLAN models (Taiwan only)

Caution!
Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Management Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
Avoid affecting the operation of nearby radar systems.

Compliance Statement of Wireless equipment (Thailand only)
This telecommunication equipment conforms to the standard or technical requirements of NBTC.
This radiocommunication equipment has the electromagnetic field strength in compliance with the Safety Standard for the Use of Radiocommunication Equipment on Human Health announced by the National Telecommunications Commission.
Recycling information in accordance with the India E-Waste
(Management) Rules (India only)

India only
This product is RoHS compliant and meets the requirements of the India E-Waste (Management) Rules. The above recycling symbol means that at the end of the life of the equipment, you must dispose of it separately at an appropriate collection point, and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. For detailed information, please refer to the following Brother India website: https://www.brother.in/

For inquiries on the collection program, please call Toll Free: 1800 222422 or 1800 2098904 (Between 9AM-5PM Mon-Sat).
Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan Only)
We, Brother Industries, Ltd.
15-1 Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
Disclaimer This product complies with the Taiwan RoHS Certification Practice.
The “Declaration of the Presence Condition of the Restricted Substances Marking” can be download form our website, Visit
support.brother.com/g/d/afm4/ and:

• Select a product category
• Select the product model.

The “Declaration of the Presence Condition of the Restricted Substances Marking” will be downloaded as a PDF file.

Trademarks

Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Each company whose software title is mentioned in this manual has a Software Licence Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.

Brother Customer Service

Customer Service
Visit www.brother.com for contact information for your local Brother office.
Service Centre Locations
For service centres in your country, contact your local Brother office. Address and telephone contact information for local offices can be found at www.brother.com by selecting your region and country.

Unlawful Use of Copying or Scanning Equipment

(Products with the scanning function only)
It is an offence to make reproductions of certain items or documents with the intent to commit fraud. The following is a non-exhaustive list of documents which it may be unlawful to produce copies of. We suggest you check with your legal adviser and/or the relevant legal authorities if in doubt about a particular item or document:

• Currency
• Bonds or other certificates of debt
• Certificates of deposit
• Armed forces service or draft papers
• Passports
• Postage stamps (cancelled or uncancelled)
• Immigration papers
• Welfare documents
• Cheques or drafts drawn by governmental agencies
• Identifying badges or insignias

In addition, driving licences and/or Certificates of Title to motor vehicles may not be copied or scanned under certain national laws. Copyrighted works cannot be copied or scanned lawfully, subject to the “fair dealing” exception relating to sections of a copyrighted work. Multiple copies would indicate improper use. Works of art should be considered the equivalent of copyrighted works.

Disclaimer

Brother disclaims any warranties with respect to avoidance, mitigation or non- occurrence of any breakdowns, malfunctions, system crashes, hang-ups, virus infections, damage and disappearances of data, and any other kind of errors by using this product. AS LONG AS PERMITTED BY APPLICABLE LAWS, BROTHER WILL NOT BE LIABLE FOR ANY LOST REVENUES OR INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES OF THE CUSTOMERS OR ANY OTHER THIRD PARTY.
These machines are approved for use in the country of purchase only. Local Brother companies or their dealers may only support machines purchased in their own countries.
Month of publication: 11/2023

www.brotherearth.com

References

• Brother support website
• Brother Solutions Center
• Brother Office Electronics for Home and Home Office
• For Product and Support Information | Brother
• Brother support website
• Brother Solutions Center
• Best Printer, Sewing Machine, Label Printer | Brother India

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>