brother SAVRXPUGK2 Luminaire XP1 Upgrade Kit Installation Guide
- June 2, 2024
- Brother
Table of Contents
brother SAVRXPUGK2 Luminaire XP1 Upgrade Kit
Read this guide before installing.
Thank you for choosing our product.
For additional product information and updates, visit our website at
www.brother.com.
Information found in this guide is current at the time of printing.
Please be aware that some contents of this guide and product specifications
are subject to change without notice.
Accessories
The following items are included with your purchase. Please verify all contents. If anything is missing or damaged, contact your authorized Brother dealer.
WARNING
This product contains small parts. Keep the product out of the reach of
children to prevent accidental ingestion of small parts.
Confirming the Installation Procedure
Check Current Status of Your Machine
-
Check 1:
Check if the color of the wireless LAN icon in the upper-left corner of the machine’s screen is blue or gray. -
Check 2:
Check the software version of the machine in the machine’s Settings Screen.
If the wireless LAN icon is blue and the software version is 4.00 or later
[Installation procedure: Type A] You will be able to use the WLAN capability
of your machine to certify the Upgrade Kit. Perform the installation according
“[Type A] Installation Procedure (For machines connected to a wireless LAN and
at Version 4.00 or later)” on the next two pages (page 3 and page 4).
If the machine does not meet the conditions listed above or it is unclear
whether it meets them [Installation procedure: Type B
You will need to skip the procedure on page 3 and page 4 of this guide, use a
computer to visit the following activation site, and then perform the
installation according to the on-screen instructions. http://s.brother/kdpb
For the computer requirements, see page 5.
Type A] Installation Procedure (For machines connected to a wireless LAN and at Version 4.00 or later)
Confirm that the machine status is “Type A” (page 2), and then pertorm the operation.
The wireless LAN must be connected to the Internet for the machine to connect to the certification server.
-
Press |Certification in the machine’s Settings screen.
-
Press [KIT II), and then press [Online Machine Certification] in the next screen that appears.
-
Review the [Terms on certification of Upgrade KIT], and then press I Agreel to accept.
-
Type in the 16-digit activation code printed on the activation card, and then press Set.
-
After a message appears, indicating that the machine number and activation code will be sent to the server, press OK .
-
When certification of the kit is complete, a message appears, indicating that certification was successtul.
Turn off the machine, and then turn it on again. -
Confirm that there is a check mark beside the kit number in the machine’s Settings screen.
The kit has been certified, and the new features can be used.
The following manuals can be downloaded from http://s.brother/kdpb
- Operation Manual
- Embroidery Design Guide
- Operation Manual Addendum
Note
If the machine is not connected to the Internet or the machine’s software is
earlier than version 4.00, you will need to use a computer to visit
http://s.brother/kdpb to upgrade the machine.
Computer Requirements
Before accessing the activation site, check that the computer to be connected
meets the following operating conditions:
“macOS” is a trademark ot Apple lnc., registered in the U.S. and other
countries.
Any trade names and product names of companies appearing on Brother
products,related documents and any other materials are all trademarks or
registered trademarks of those respective companies.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>