brother 32 Sewing Foot Accessory Set Instruction Manual

FamilyMall Sewing Presser Feet Set Introduction

32 Sewing Foot Accessory Set

Manual video is available on YouTube: https://youtu.be/h5g48jYaH-4Invisible Zipper Foot For truly invisible zippers with a professional appearance, this is the perfect foot to use. The zipper teeth act as the guide for this foot, allowing for perfectly positioned stitches that won’t show on the front of your garment. Applique Foot 7mm This presser foot is shorter than most, making it easier to move around curves and comers when sewing your applique pieces. Made of clear plastic, giving you a better view as you sew. Satin Stitch Foot 7mm Amust-have for anyone who wants to sew with satin or decorative stitches. The cutout on the underside of the clear foot is designed to accommodate the dense stitch formation and prevents stitches from bunching, giving you a beautiful embroidered finish. Open Toe Foot 7mm The Open Toe Foot is great for precision embroidery and apptique because it provides a better view of the area that you are sewing. The arch beneath the foot allows thicker stitches to pass smoothty. Cording Foot 7mm Attaching decorative cords and thread is a snap. The cording foot keeps up to three threads under control so both hands can guide the fabric. Choose this foot when you want to create decorative stitching over cording on single and double layers of fabric. Straight Stitch Foot This foot is designed to glide evenly over fabric so you avoid puckering. The built in measuring gauge on the right toe is an amazing guide for accurate topstitching and the toes are a great edge stitching guide. The big left hand toe allows to easily tackle multipie layers of fabric. Roller Foot 7mm Use the Roller Foot when sewing fabrics such as leather, suede or synthetics. The rollers on this foot provide grip, holding the fabric in place as the feed dogs move the fabric. preventing slippery fabrics from sliding all over the place or sticking to the throat plate. Biind Stitch Foot 7mm This foot helps guide the fabric when hemming. allowing the needle to nibble a small amount of fabric for a perfect blind hem. With the help of the guide, this foot can also be used for topstitching, edge stitching and pintucks. Other name: Blind Hem Foot Braiding Foot The braiding foot is one of many types of feet used in couching, which is a form of decorative embellishment, where a Length of braid, cord, piping, ribbon, thread. trim or yarn is couched or stitched over to attach it to a fabric project. Alternate names: Couching Foot and Cording Foot 1/4″ Quilting Foot This foot has markings so you can sew an exact 1/4” seam when creating patchwork for quilting. piecing or to create perfect 1/4” or 1/8” topstitching. This foot also features raised markings along the sides of the foot for easy and flawless pivoting at the corners of blocks. Alternate name: 1/4” Piecing Foot Beading Foot 7mm
This foot has many uses such as sewing seams in knitwear, attaching beads up to 4mm. and making and applying piping up to 1/4” in diameter. Also sews corded pin tucks and sews piping 1/8”, 1/4° & 3/8″ Alternate na me: Pearl Piping Foot Standard Zig-Zag Foot 7mm
This foot is an upgraded standard Zig-Zag Foot. It has guide marks for left. center. right needle position, extra wide sole, a zigzag opening and a 1/4” opening in the plastic front portion of the foot to guide small trim and elastic or heavy decorative threads. Non Stick Foot 5mni This foot is designed to prevent fabrics such as leather and vinyl / oil-cloth, plastic, suedes and ultrasuede from sticking to the bottom of the foot. The shape of this foot is the same as your regular zigzag / all-purpose foot to suit ANY situation. Darning Foot 5mm
Use this foot for automated embroidery. free motion quilting, stippling, damning and mending. The foot raises and lowers with the needle to hold fabric in place while stitches are created and to allow fabric to be moved between stitches. Pay careful attention to the position of the top arm when attaching this foot. Alternate name: Freehand Embroidery Foot Piping Foot
Use this foot to couch single or double rows of cording to your fabric. it can also be used to make single and double rows of piping. The underside of the foot has two grooves to accommodate the cording. Maximum cord size is 5mm. Other name: Double Welting Foot 9 Groove Pintuck Foot 7mm
The pintuck foot. when used with a twin needle, helps you to make perfect pintucks as well as to sew corded pintucks on shirts, blouses and many home decor projects. Use this 9 groove version with lighter fabrics and the 5 groove version, foot #22, with heavier fabrics. 1/4 Quilting Foot with Guide
This quilting foot is similar to foot #10. with the addition of a guide blade to the side. It helps keep stitching and seam allowances consistent and equal on all quilting and sewing projects, particularly useful for beginners. Alternate name: 1/4” Piecing Foot Gathering Foot 7mm
The Gathering foot automatically shirrs light fabric as you sew along the edge or in the center of a piece fabric. Be aware these gathers can not be adjusted after they are sewn. Use this foot to gather skirts, make puffing for heirloom work, or even make ruffles for pillows, Altemate name: Shirring Foot Knit Foot 5mm
This knit foot is perfect for lightweight knits and very slippery lightweight or stretchy fabrics of all sorts, especially jersey knits. It is cteverly designed to grip both sides of the fabric firmly as the needle comes down and through the layers of fabric. This foot helps greatly with puckering. thread skipping and thread breaking. Pay attention to the position of the top arm when attaching the foot. Alt name: Tricot Foot Adjustable Zipper Foot
The zipper foot is adjustable from left to right so the needle can stitch very close to the zipper as needed for your sewing projects. Use the zipper foot whenever you need to stitch close to a raised edge: zipper insertion. corded seams, tubutar cording, slipcover welting to name a few. Fringe Foot 7mm
Asimpie to use foot to produce a couple of stunning embellishments for your sewing projects. Fringes, chenilles and loops can be used to great effect on cushions, clothes. quilts, bags. toys and more. This center bar creates the magic by increasing the length of your stitches to create the fringe. which is really justlargeloops. Alternate name: Looper Foot 7 Groove Pintuck Foot 5mm
The pin tuck foot. when used with a twin needle, helps you to make perfect pin tucks as well as to sew corded pin tucks on shirts. blouses and many home decor projects easily. Use this 5 groove version on heavier fabrics and the 9 groove version. foot #16. on lighter fabrics. Darning Foot 7mm
Similar in use and function to Darning Foot #14. This spring loaded darning foot has a wider transparent base. This foot allows for a 7mm extra wide zigzag stitch. We give you the choice to pick which darning foot suits your personal sewing style. Stitch Guide Foot 7mm
This presser foot has a built in ruler and allows you to sew precise and even parallel lines while topstitching and to make accurate seam allowances, giving your projects a professional finish with ease. Alternate name: Presser foot with ruler 5 Hole Cording Foot 7mm
Use this foot to attach decorative cords and threads. When used with threads and small cords to fit they glide easily through the holes on the cording foot. The foot keeps the threads under control so you can place both hands on the fabric to guide and move through the pattern you select. 7 Hole Cording Foot 7mm
Similar to the 5 hole cording foot. #25. with the addition of two extra threads. The 7 hole cording foot allows for a full rainbow of cords to be attached to your projects. Eage Joining Foot 7mm
The edge joining foot is used for edge stitching,stitch-in-the-ditch stitching and heirloom sewing. The center bar is the perfect guide for fabric edges. Unlike the blind stitch foot. #8, where the bar extends into the needle hole. the edge joining foot stops its bar before the hole making it possible to use any stitch on your machine with this foot. Overcast Foot 7mm
This foot delivers a consistent and accurate overcasting, or overlocking. stitch for a serged effect using your sewing machine. The threadis locked around the edge of the fabric, aligned with the edge, to prevent fabtic from unraveling. This stitch can be used to finish off raw edges or for simultaneousty seaming and overcasting two layers of fabric ln a single pass. Open Toe Foot 5mm
Like the previous open foot. #4. the large opening on this presser foot provides a clear view of your work while sewing since there is no bridge between the toes. There is also a groove on the underside to allow dense decorative stitches to pass underneath without jamming. Both of these characteristics make this foot ideal for creating applique and decorative stitching. Rolled Hem Foot 5mm
Used for light to medium weight fabrics. the foot is designed to rollthe edge of the fabric into the topside of the hem to create a smooth rolled hem. Perfect for finishing circle skirts. The underside of this foot has a‘ curved groove to allow the newly created hem to pass smoothly as you sew. Alternate name: Round hemmer foot Fiat Hem Foot 7mm
As with the 5mm rolled hem foot. #30. this foot has been designed to create a fiat narrow hem on lightweight fabrics. The groove beneath the foot allows for a wider flat hem to slide smoothly away as you sew. The rolled process to create the wider hemis the same. Alternate name: Flat hemmer foot Adjustabie Blas Binder Foot 7mm
This foot makes attaching binding a lot easier and faster. It can be used with both commercially made bias binding or with bias binding that you make yourself. This presser foot can be used for sewing bias tape fora finished width between 6 to 20mm(1/4″to 3/4″). No need tosew, tum and finish: this foot allows you to bind one or two layers of fabric ina single pass with beautifully even top stitching.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>