ROBENS 690364 Thacla Tipi Lamp Instruction Manual
- May 15, 2024
- ROBENS
Table of Contents
ROBENS 690364 Thacla Tipi Lamp Instruction Manual
INSTRUCTIONS FOR USE
- Inner LED’s
- Outer LED’s
- Button
- Battery compartment lids
- Automatic tipi pole adjuster
- Hook
- Latch for attachment to pole
- Lamp attached to pole
LIGHT MODES
Press the button to alternate the functions: Inner LED’s -> Outer LED’s -> all
LED’s -> all LED’s dimmed -> OFF
USE OF THE LAMP
- Open the four battery compartments (4.).
- Insert 4 x 1.5V AA batteries (not included), observe polarity.
- Please use batteries of high quality and take out the batteries if you do not use the light for a long time, or the light can be damaged by electrolyte leakage or battery explosion which is caused by low quality battery.
- Please clean the contacts of your light from time to time, especially if the light flickers or doesn’t light up.
- Lamp can be used hanging from the hanging from the hooks (6.) or attached for a tipi pole. (8.)
- To attach to tipi pole: Open the lamp by releasing the latch (7.) -> Place the lamp around the pole, the automatic pole adjusters (6.) will adapt to the pole diameter -> Close the lamp and secure the latch.
- Lamp can be cleaned with a damp rag.
- Protect the lamp from rain.
- Do not use corrosive liquids to clean the lamp.
- Do not stare into the light source.
- Do not modify the product.
- Do not charge non-rechargeable batteries.
- Do not mix new and used batteries or different types of batteries.
- Do not short circut supply terminals.
- Do not mix new and used batteries.
- In case of leaking batteries, remove safely from product and dispose according to local regulations.
- The light source of this luminaire is not replaceable.
When the light source reaches its end of life, the whole luminaire shall be replaced
LIGHT SOURCE: 5W LED
TECHNICAL DATA
3V (4×1.5V AA not included) 5W
Class 3 appliance
DISPOSE OF PRODUCT AND BATTERIES ACCORDING TO LOCAL REGULATIONS.
Read User Manual Online (PDF format)
Loading......