HOOKE ROAD BXG.2066-1S Inner Fender Liners Front Wheel Well Liners Installation Guide
- May 15, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.2066-1S Inner Fender Liners Front Wheel Well Liners
Contents
Qty| Part Name| Size(mm)| Qty| Part Name|
Size(mm)
---|---|---|---|---|---
2| Front Inner Fender Liners Assembly| | 20| Button Head Socket Cap Bolts
Screws| M48
10| Button Head Socket Cap Bolts Screws| M625| 22| Flange Hex Lock Nuts| M6
2| Hex Washer Head Self Drilling Screws| M425| 20| Nylon Insert Lock Nut| M4
22| Button Head Socket Cap Bolts Screws| M610| 10| Flat Washer| M6161. 5
Drive Side
Passenger
Tools required
-
*M625**
-
*M622
**
- **M6
**
- *M425
**
- *M48
**
- **M4
**
- *M616*1.5
**
a. 3mm Allen Wrench;
b. 4mm Hex Bit Socket;
c. 10mm Wrench;
d. Drive Socket Ratchet Wrench;
e. Power Drill;
Installation time
About 1 hour, 1-2 people may be needed. Installation Time May Differ According to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT ANDREA INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2066-1S), please scan the QR code.
Installation instruction
Step 1 : Please check the package to confirm receipt of all products and accessories (there are total left and right Front Inner Fender Liners And Accessories).
Step 2: Before loading, please divide the product according to the passenger side and driver side as shown in the picture, and prepare to assemble.
Drive Side
Passenger
Notice: Whether on the passenger side or the driver’s side, this pattern
is towards the front of the vehicle.
Passenger Side (A2, B2, C2, D2, E2, F2) Installation:
Step 3 : Install the Decorative Plate (E2) into the back of the middle
part (A2)with the Button Head Socket Cap Bolts Screws (M4*8), Nylon Insert
Lock Nut (M4).
Step 4: Assembly the passenger side Front Inner Fender Liners (A2, B2,
C2, D2) with the Button Head Socket Cap Bolts Screws (M6*10), Flange Hex Lock
Nuts (M6). As the picture shown.
Notice: Please note the relative positions of A1, B1, C1, D1, The part (A2) is at the top, the part (D2) is above the part (C2).
Step 5: Please confirm whether your vehicle has this factory vehicle
bracket, if so, you don’t need to install the F2 part, otherwise you need to
install it with the Button Head Socket Cap Bolts Screws (M4*8), Nylon Insert
Lock Nut (M4).
Step 6: Install the passenger side front inner fender liners into your
vehicle with the five original vehicle holes and the hole in the lower right
corner that needs to be drilled by hand. When installing, please align the
right hole first, then lift the middle part and install the left one last.
Step 7: Install the five holes on the middle and left with the Button
Head Socket Cap Bolts Screws (M625), Flat Washer (M616*1.5).
Step 8: Install the last hole on the right with the Hex Washer Head Self
Drilling Screws (M4*25). Notice: Please use the Power Drill to drill the screw
into the holes.
Step 9: Please use the same installation steps to install on the driver side.
Step 10:
The installation is complete. We hope you enjoy a wonderful off-road life with
this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Hooke Road to find your parts
@HookeRoad4x4
Post Your Jeep/Truck
w/Hashtag #hookeroad to Win Discount Every Week
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>