AUDIBAX Beta 1BT Professional Active Speaker 100 W Power User Manual
- May 15, 2024
- AUDIBAX
Table of Contents
USER´S MANUAL
Please read the manual before using the product
Troubleshooting
Please check if power is connected, and if the wall outlet is switched on.
- Please switch the system off then on and reconnect to the audio source.
- Please check if the master volume is turned to minimum.
- Please check if the audio input cable is connected correctly.
- Please check if there is signal from audio source.
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products will be customized for different applications. Pictures and
illustrations shown on this manual may be slightly different from actual
product. If any difference is found, the actual product prevails.
Important Safety Instruction
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Thank you for purchasing our product. We try to provide powered speaker
products to satisfy the need of our end customers. This product can add to
your home entertainment, personal computer, and mini home theater great sound
performance. Please read this manual carefully before operation.
The lightning flash with arrowhead inside the triangle, is intended to alert
the user to the presence of un-insulated dangerous voltage within the
product´s enclosure that may be of a sufficient magnitude to constitute a risk
of electric shock to persons.
CAUTION To prevent the risk of electric shock, do not remove cover (or
back). No user -serviceable parts inside. Refer servicing to qualified service
personnel only.
The exclamation point inside the triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in
the literature accompanying the product.
- Read this instruction:
- Keep these instructions.
- Heed all warnings
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves. or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet. consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long period of time.
- Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged. liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
**** Correct Disposal of this product. This marking indicates that this
product should not be disposed with other household wastes. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take
this product for environmental safe recycling.
This equipment is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to
electrical earth.
Unpack the Box
Box contets:
Specifications
Power output: RMS 5o W × 2
Signal to noise ratio: > 80 dB(A)
Distortion: ≤ 0.5%
Frequency response: 75 Hz ~ 18 KHz (+ /-9dB)
Input type: RCA & 3.5MM
Input sensitivity: PC: 800 mV ‡ 50 mV
AUX: 800 mV # 50 mV
Adjustment: Master volume/treble/bass dial. remote control
Treble unit: Ф2inch silk dome tweeter
Bass unit: 5inch(127mm)
Dimension: 250mm(W)x 180mm(D)×300mm(H)
Weight (net/gross): 8.6/9.5KG
Connectivity & Operational Guide
Adjustment
1.POWER
2. Master Volume
3. Treble
4. Bass
5. Echo for microphone
6. Volume control for microphone
7. Mic1 input| 8. Mic2 input
9. USB port
10.Play/Pause
11. Next/Volume up
12. SD/MMC card slot
13. Previous/Volume down
1 4. Input mode
---|---
- Play the audio on your connected device and adjust master volume/bass/treble to a desired level.
- Mode: Press “Input” to switch among BLUETOOTH, USB, Tr and aux Bluetooth pairing: Switch the unit in Bluetooth mode, turn on Bluetooth function on vour mobile phone (notebook, tablet etc.), search the device Audibax Beta 1BT and connect it. When pairing is successful, it will pair automatically next time when you turn on the unit
- EQ: There are 5 types of EQ mode, you can change it among Rock, Pop Classical, Jazz, Normal.
- Play via USB port: Insert flash disc into Us port, it will play MP3 files in your disc automatically, use Previous or Next to choose the file you want to play.
- Play via card slot: Insert SD or MMC card, it will play MP3 files in your card automatically, use Previous or Next to choose the file you want to play
- Play via aux: Insert the cable plug to tr jack, connect the speaker with other device via 3. 5mm connecting cable (RCA input will be cut off automatically), it can work with DVD player, CD player, MP3/MI4 player, computer etc.
Illustrations
1. Tweeter
2. Woofer
3. Control Panel| 4. Digital input
5. Analog input
6. Bass input| 7. Speaker output
8. Power switch
9. AC input
---|---|---
Remote Control
1. ON/OFF STANDBY
2. MUTE
3. PREVIOUS/BACKWARD
4. VOLUME DOWN
5. VOLUME UP| 6. PLAY/PAUSE
7. NEXT/FORWARD
8. MODE
9. EQ
10. PAIR
---|---
Connectivity & Operational guide
Connecting the Speakers
Connect the active speaker and passive speaker with the included connecting
Cabl (golden cable to red speaker terminal, and silver cable to the black).
Connectaudio Seurce like PC sound card to active speaker with the included
3.5mm to RCA connector cable.
Connect to A.C. Power Outlet
Please connect the A.C. power plug to the correct A.C. voltage outlet.
Notes:……….
Documents / Resources
|
AUDIBAX Beta 1BT Professional Active Speaker 100 W
Power
[pdf] User Manual
Beta 1BT Professional Active Speaker 100 W Power, Beta 1BT, Professional
Active Speaker 100 W Power, Speaker 100 W Power
---|---