TESmart TES-HMA0404A1U-USBK Ultra HD 4K HDMI 4X4 Matrix Switcher 4 Port User Manual
- June 6, 2024
- TESmart
Table of Contents
4X4 HDMI Matrix
USER MANUAL
ENJOY THE VIVID WORLD
UltraHD HDR
Features:
-
Support resolution up to 3840×2160@60Hz
-
HDMI input/output port support PCM, Dolby AC3, DTS5.1, DTS7.1, and DSD audio format
-
Smart EDID management, make it compatible with most display devices
-
Matrix status could be memorized after power down, automatically restore previous matrix status after next power on
-
Support 4 configurable user preset connections
-
Easy to control matrix via IR receiver, panel keypad, and PC (via LAN port or RS232 port)
-
Support DVI-D single link sources and displays with the
use of HDMI-to-DVI adapters -
HDCP2.2 compliant
-
Support HDR
-
Support L/R audio output
Packing List:
1 4×4 HDMI Matrix
1 Remote control
1 IR Receiver cable
2 Rack-ears
1 DC 12V Power adapter
1 User manual
Pane Description:
ID| Name|
Description
---|---|---
1
|
LCD display
| Display current routing status and system setting
2
|
Output selection button
| Select output channel
3
|
Input selection button
| Select input port
4
|
Function select button
| Scene/T: Save current routing as user preset and restore user’s preset
FUN/1: Fast setting N to N mirrored routing and N to all routing
Setting: Change LED time and buzzer status
Enter: Enter user’s setting
ID
| Name|
Description
---|---|---
5
|
Output status
| LED indicator of output connection status
6
|
Input status
| LED indicator of input connection status
7
|
IR receiver
| Receive IR remote signal
8
|
Power status
| LED indicator of power supply
9
|
Power switch
| Power on or off the matrix
10
|
DC 12V
| 12V DC power supply
11
|
HDMI input
| Connect to HDMI source devices
12
|
L/R audio output
| Connect to speaker
13
|
HDMI output
| Connect to HDMI displays
14
|
Ext. IR
| For extended IR receiver cable input
14
|
LAN port
| Connect to local area network, control matrix by TCP/IP commands
16
|
Service data port
| Connected to the USB port of PC for system upgrade
17
|
RS232
| Connect to RS232 connector for serial control
Connection Diagram:
Keypad Use:
-
Selecting sources and outputs by keypad
(1)1 to 1 switch
-
Save preset routing status
-
Load preset routing status
-
Change LED timeout
The LED indicators on the front panel, including the backlight of the LCD display, can be turned off after seconds of inactivity. Below is how to change the settings: -
Mute/unmute buzzer
IR Remote Control:
(1) 1 to 1 switch:
Step 1: Press in the output block to select one of the output ports you are
going to control
Step 2: Press in the input block to select the input source which you want to
be displayed on the selected output
(2) Switch to mirrored connection:
Press, then the routing status will be changed to Input 1 – Output A, Input 2
– Output B, Input 3 – Output C, Input 4 – Output D
(3) 1 to all switch:
Press , then press in input block to select the input source which you want to
be displayed on all outputs
(4) Preset routing for scenes:
Press , then press in scene block, save current routing status to user preset
memory 1/2/3/4
Press , then press in scene block, load routing status from user preset memory
1/2/3/4 and apply to current routing.
Note: 1. For the safety request by some express company, the remote
control is not equipped battery by default. Please install the button battery
CR2025 before using it.
2. Unspecified buttons above are nonfunctional.
Warranty Information:
We warrant this product as free of defects in material and workmanship for a
period of one (1) year from the date of shipment.
If during the period of warranty this product proves defective under normal
use, we will repair or replace this product, provided that this product has
not been subjected to mechanical, electrical, or other abuse or odifications.
If it fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs
are warranted for six (6) months from the day of reshipment to the buyer.