EDISION Digital Terrestrial & Cable HDMI dongle Receiver DVB-T2/C H.265-HEVC User Manual
- June 6, 2024
- EDISION
Table of Contents
nano T265+
Digital Terrestrial & Cable HDMI dongle Receiver DVB-T2/C H.265/HEVC
Congratulations on purchasing an EDISΙON nano T265+
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at
www.edision.gr
Unpacking
Package Contents
Documentation
Service note
Please contact your EDITION specialist dealer for any further support and
service.
Receiver nano T265+
Note: The scope of delivery may also include parts not listed here.
1. Receiver
2. IR Remote Control 2in1
3. USB cable type-Y| 4. HDMI extension cable
5. IR cable
6. SMA to IEC adaptor| 7. 1 x Cable tie
8. 2 x «ΑΑΑ» batteries
9. Mini Manual GR/EN/DE/ES/IT/FR
---|---|---
Connections
- HDMI: Connection to an HDTV quality TV
- / USB: Connection for USB storage devices & Powering (DC 5V) via TV USB port
- Infrared sensor for the reception of remote control commands
- ANT IN: Input for connecting to terrestrial or cable signal from the antenna via SMA to IEC adaptor
Connecting and switching on
Note: For trouble-free signal reception your antenna and cable installation should be calibrated and inspected by a qualified professional with a digital TV-level-measuring instrument.
- Connect the receiver using HDMI extension cable via the HDMI port to your TV’s HDMI input port
- Then connect the coaxial cable via SMA to the IEC adaptor with the terrestrial or cable signal to the ANT IN input of the receiver.
- Connect the Jack to IR cable to the IR IN port to control the STB with the Remote Control unit.
- Insert the batteries into the remote control. Notes on the remote control can be found on the back of these instructions.
- For STB powering (DC 5V) via TV USB port, connect the USB cable type-Y to the USB port of the STB and to the USB port on the TV.
- The receiver starts with the BOOT process and is operational within a short time.
For information about EDITION Hardware or Software matters, please contact support@edision.gr or visit the DOWNLOAD CENTER: https://www.edision.gr/en/support
“The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.”
The CE certificate of the product is available on our webpage, by visiting
this link: https://www.edision.gr/en/support
Remote Control UNIVERSAL REMOTE CONTROL 2in1
EDITION UNIVERSAL REMOTE CONTROL 2in1 is compatible with all EDITION STB’s*, plus it is pre-programmed with 4 basic functions for SAMSUNG & LG** tv sets. Alternatively, you can program its 4 programmable buttons to any 4 functions of your TV.
| Power
Switches between operation and standby
Mute
Mutes or unmutes the audio temporarily
PAGE+ / PAGE –
Scrolls the channel-list forward or backward
V. FORMAT
Changes the display TV standard
FIND
For searching for programs in lists
Menu
Open main menu & select sub-menu using by a navigation button
INFO
Displays the information bar
EXIT
Stops a menu/pop-up window
ADV
Selection of the electronic program support
DIVISION
RECALL
Returns to the previous channel
TV/RADIO
Switch to TV mode. Switch to Radio mode
---|---
NUMERIC KEY (0-9)
Control the numerical operation and change the Channel/Service number directly
| Displays a file-list
Safe USB Removal
REC
Activates immediately recording-option
PLAY/PAUSE
Play start/pause
Stops timeshift, recording, or playing
Allows you to set the time at which the Receiver auto. switches to standby
mode
Activates the audio-menu
Option button. Switching between
TV/AV mode (Not in HDMI mode)
Activates the menu “Subtitle/Teletext”
Web TV key
---|---
MANUAL INSTRUCTION FOR LEARN EDITION UNIVERSAL REMOTE CONTROL 2in1
Your set-top-box remote control has 4 learning-function keys, in the up right- hand side TV keypad panel area. Each one can be used accordingly as the following example:
- Turning your TV set ON/OFF [SET]
- Increasing/decreasing volume [VOL+, VOL-]
- Switching between TV/AV mode [TV/AV]
The other 39 keys are for the control of the EDITION set-top box.
SET UP FOR LEARNING FUNCTION
-
Press [SET] key in the up right-hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keeps fighting, then release the key. This means the remote control is in the learning mode.
-
Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example, the [POWER] key, then the red LED is flashing. It means this button is ready to receive the learning signal.
-
Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between these two ports has to be about 2 ~3 CM).
-
Then press the key which is to be learned in your original TV remote control, for example, the [POWER] key of your original TV remote control continuously for 3 seconds. If the red LED flashes quickly three times and keeps lighting, it means the set-top box remote control has succeeded in receiving the signal and you have completed the learning procedure of the ON/OFF [TV POWER] key.
-
Then release the [POWER] key of your original TV remote control.
If the copying procedure fails, the red LED will blink and stay OFF. In this case please repeat the procedure.
For the next programmable function, please repeat steps 1 to 2: -
Switching between TV/AV mode [TV/AV]
-
Increasing/decreasing volume [VOL+, VOL-]
Now you can operate your TV with the 4 programmed by you keys of your set-top
box remote control.
During the operation, the LED will flash to indicate that the signal is
transmitted!
- For EDITION STB compatibility, please visit our webpage
**LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd respectively. Any brand name reference in this text is only for informational purposes towards the consumer that is interested in the product.
Visit us on: www.edision.gr
EDISION HELLAS LTD • FARMAKEIKA – 57001 N. RISIO • THESSALONIKI – GREECE